Research on the propagation characteristics of multiple cracks in steel bridge joints

J.S. Cheng; S. MA; J.H. Duan; R. Wang; X.L. Du

doi:10.1016/j.tafmec.2024.104688

journal article Dec 01, 2024

Research on the propagation characteristics of multiple cracks in steel bridge joints

J.S. Cheng S. MA

J.H. Duan R. Wang

X.L. Du

Theoretical and Applied Fracture Mechanics Vol. 134 pp. 104688 · Elsevier BV

View at Publisher Save 10.1016/j.tafmec.2024.104688

Topics

No keywords indexed for this article. Browse by subject →

References

37

[1]

Hu "Investigation of low cycle fatigue crack propagation behavior of 316H steel at 550℃ based on cyclic response and damage accumulation: experiment and modelling" Int. J. Plast (2023) 10.1016/j.ijplas.2023.103661

[2]

Zhou "Study on fatigue crack propagation behavior of TA15 titanium alloy repaired by laser deposition repair," Fatigue Fract. Eng. M. (2022) 10.1111/ffe.13840

[3]

Ma "Investigation on fatigue crack propagation behaviour of U71Mn and U75V rails using peridynamics" Eng. Fract. Mech. (2023) 10.1016/j.engfracmech.2023.109097

[4]

Schjdt-Thomsen "Crack propagation through weld and heat affected zone" Fatigue Fract. Eng. m. (2023) 10.1111/ffe.13866

[5]

Sérgio "Fatigue crack growth modeling considering a hybrid propagation strategy" Fatigue Fract. Eng. m. (2023) 10.1111/ffe.13950

[6]

Peng "Digital twin-driven framework for fatigue life prediction of welded structures considering residual stress" Int. J. Fatigue (2024) 10.1016/j.ijfatigue.2024.108144

[7]

Peng "Fractographic analysis and particle filter-based fatigue crack propagation prediction of Q550E high-strength steel" J. Mater. Civ. Eng. (2023) 10.1061/jmcee7.mteng-16335

[8]

Ma "Corrosion fatigue crack growth prediction of bridge suspender wires using Bayesian gaussian process" Int. J. Fatigue (2023) 10.1016/j.ijfatigue.2022.107377

[9]

Chavez "Failure analysis of a Pelton impeller" Eng. Fail. Anal. (2015) 10.1016/j.engfailanal.2014.08.012

[10]

Cui "Multi-crack dynamic interaction effect on oil and gas pipeline weld joints based on VCCT" Energies (2022) 10.3390/en15082812

[11]

A.R. Ingraffea, E. Iesulauro, K. Dodhia, et al., A Multiscale Modeling Approach to Crack Initiation in Aluminum Polycrystals, (2022).

[12]

Shen "A new method for predicting double-crack propagation trajectories of brittle rock" Int. J. Appl. Mech. (2021) 10.1142/s1758825121500265

[13]

Miao "Lifetime study of uniform and non-uniform multi-crack fusion and extension in an approximate plane" Theor. Appl. Fract. Mec. (2024) 10.1016/j.tafmec.2024.104538

[14]

Materna "Residual Stress around the fatigue crack front in a rectangular sample cut from CT specimen" J. Multiscale Model. (2022) 10.1142/s1756973721440030

[15]

Xin "Mixed-mode fatigue crack propagation simulation by means of Geq and walker models of the structural steel S355" Theor. Appl. Fract. Mec. (2023) 10.1016/j.tafmec.2022.103717

[16]

Li "Simulation of mixed mode I-II crack propagation in concrete using toughness-based crack initiation-propagation criterion with modified fracture energy" Theor. Appl. Fract. Mec. (2023) 10.1016/j.tafmec.2022.103701

[17]

Zhang "Automatic simulation of the initiation and propagation of interface cracks and matrix cracks with VCFEM" Theor. Appl. Fract. Mec. (2023) 10.1016/j.tafmec.2022.103747

[18]

Wang "Characteristics of crack growth in brittle solids with the effects of material heterogeneity and multi-crack interaction" Int. J. Fract. (2024) 10.1007/s10704-024-00771-w

[19]

Wang "Experimental and numerical investigation on penetrating cracks growth of rib-to-deck welded connections in orthotropic steel bridge decks" Structures. (2024) 10.1016/j.istruc.2024.106058

[20]

Amato "Numerical and experimental investigation of mixed-mode crack growth in aluminum alloys" Fatigue Fract. Eng. Mat. (2022) 10.1111/ffe.13786

[21]

Amato "Prediction of the crack growth propagation direction in non-proportional mixed-mode missions" Int. J. Fatigue (2023) 10.1016/j.ijfatigue.2022.107233

[22]

Wang "Fatigue crack propagation simulation of airfoil section blade under aerodynamic and centrifugal loads" Eng. Fract. Mech. (2023) 10.1016/j.engfracmech.2023.109702

[23]

R. Hu, J. Liu, J. Chen, et al., Study on Vibration and Crack Propagation Control of Cracked Asymmetric Rotor Based on Three-Dimensional Finite Element Model, 2018 IEEE International Conference on Mechatronics and Automation (ICMA), 5-8 (2018). doi:10.1109/ICMA.2018.8484602. 10.1109/icma.2018.8484602

[24]

Busse "Three-dimensional LEFM prediction of fatigue crack propagation in a gas turbine disk material at component near conditions" J. Eng. Gas Turbine. Power (2016) 10.1115/1.4031526

[25]

Glodek "An applied approach for estimating fretting fatigue lifetime of dovetail joints using coupon scale test data" Theor. Appl. Fract. Mec. (2022) 10.1016/j.tafmec.2022.103455

[26]

Yue "A fatigue damage accumulation model for reliability analysis of engine components under combined cycle loadings" Fatigue Fract. Eng. Mat. (2020) 10.1111/ffe.13246

[27]

Mangardich "Modeling crack growth of an aircraft engine high pressure compressor blade under combined HCF and LCF loading" Eng. Fract. Mech. (2019) 10.1016/j.engfracmech.2019.04.028

[28]

Pang "Multi-crack propagation analysis of double-side welded rib-to-deck joint in orthotropic steel decks" J. Constr. Steel Res. (2024) 10.1016/j.jcsr.2024.108731

[29]

W. Baijian, Zhaoxia, et al. Modeling of crack growing, merging and intersecting in quasi brittle materials, 13th International Conference on Fracture (ICF13.0), 16-21 2013. doi: ConferenceArticle/5af346cec095d70f18b40514.

[30]

Xiao "Improved XFEM (IXFEM): 3D dynamic crack propagation under impact loading" Comput. Methods Appl. Mech. Eng. (2023) 10.1016/j.cma.2022.115844

[31]

Li "Ultimate strength assessment of ship hull plate with multiple cracks under axial compression using artificial neural networks" Ocean Eng. (2022) 10.1016/j.oceaneng.2022.112438

[32]

Wang "Prediction of multiple fatigue crack growth based on modified Paris model with particle filtering framework" Mech. Syst. Signal Pr. (2023) 10.1016/j.ymssp.2023.110124

[33]

Y. Murakami (Editor-in-Chief), et al., Stress Intensity Factors Handbook, Pergamon, 1989.

[34]

A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks

J. R. Rice

Journal of Applied Mechanics 1968 10.1115/1.3601206

[35]

Jin (2006)

[36]

Moreno "Estimations of fatigue life and variability under random loading in aluminum Al-2024T351 using strip yield models from NASGRO" Int. J. Fatigue (2016) 10.1016/j.ijfatigue.2015.09.031

[37]

National Boiler and Pressure Vessel Standardization Technical Committee (SAC/TC 262). Safety Evaluation of Pressure Vessels with Defects in Service. GB/T 19624-2019.

Metrics

7

Citations

37

References

Details

Published: Dec 01, 2024
Vol/Issue: 134
Pages: 104688
License: View

Authors

Harvard University

Cite This Article

J.S. Cheng, S. MA, J.H. Duan, et al. (2024). Research on the propagation characteristics of multiple cracks in steel bridge joints. Theoretical and Applied Fracture Mechanics, 134, 104688. https://doi.org/10.1016/j.tafmec.2024.104688

Research on the propagation characteristics of multiple cracks in steel bridge joints

You May Also Like