Multiscale analysis of wheel-rail rolling contact wear and damage mechanisms using molecular dynamics and explicit finite elements

Tucker "Investigating the deformation of nanocrystalline copper with microscale kinematic metrics and molecular dynamics" J Mech Phys Solids (2012) 10.1016/j.jmps.2011.11.007

[6]

Sun "Experimental study on pore structure evolution of coal in macroscopic, mesoscopic, and microscopic scales during liquid nitrogen cyclic cold-shock fracturing" Fuel (2021) 10.1016/j.fuel.2021.120150

[7]

Furukawa "Structuring of metal-organic frameworks at the mesoscopic/macroscopic scale" Chem Soc Rev (2014) 10.1039/c4cs00106k

[8]

Li "Vehicle headway modeling and its inferences in macroscopic/microscopic traffic flow theory: A survey" Transp Res Part C: Emerg Technol (2017) 10.1016/j.trc.2017.01.007

[9]

He "On the microstructure evolution and nanocrystalline formation of pearlitic wheel material in a rolling-sliding contact" Mater Charact (2020) 10.1016/j.matchar.2020.110333

[10]

Li "Study on wear behavior of FeNiCrCoCu high entropy alloy coating on Cu substrate based on molecular dynamics" Appl Surf Sci (2021) 10.1016/j.apsusc.2021.151236

[11]

Zhou "Study on the wear and damage behaviors of hypereutectoid rail steel in low temperature environment" Wear (2020)

[12]

Shu "Study on the Influence of Sand Erosion Process on the Wear and Damage of Heat-Treated U75V Rail Steel" J Tribol (2021) 10.1115/1.4049110

[13]

Wang "Study on the adhesion behavior of wheel/rail under oil, water and sanding conditions" Wear (2011) 10.1016/j.wear.2010.12.019

[14]

Pan "Investigation into the evolution of the microcosmic surface of bainitic wheel steel material suffering polygonal wear" Wear (2022)

[15]

Hu "Investigation on wear and rolling contact fatigue of wheel-rail materials under various wheel/rail hardness ratio and creepage conditions" Tribol Int (2020) 10.1016/j.triboint.2019.106091

[16]

Rezende "Wear behavior of bainitic and pearlitic microstructures from microalloyed railway wheel steel" Wear (2020)

[17]

Hoa Ngan "Finite Element Analysis Simulation of the Effect of Induction Hardening on Rolling Contact Fatigue" J Tribol (2018) 10.1115/1.4040305

[18]

Yan "Numerical study of sliding wear caused by a loaded pin on a rotating disc" J Mech Phys Solids (2002) 10.1016/s0022-5096(01)00093-x

[19]

Numerical investigation on the rolling contact wear and fatigue of laser dispersed quenched U71Mn rail

Jizhong Zhao, Hongchen Miao, Qianhua Kan et al.

International Journal of Fatigue 2021 10.1016/j.ijfatigue.2020.106010

[20]

Zhou "Prediction of the coexistence of rail head check initiation and wear growth" Int J Fatigue (2018) 10.1016/j.ijfatigue.2018.03.027

[21]

Pun "A single parameter to evaluate stress state in rail head for rolling contact fatigue analysis" Fatigue Fract Eng Mater Struct (2014) 10.1111/ffe.12157

[22]

Zhao "Modeling of high-speed wheel-rail rolling contact on a corrugated rail and corrugation development" J Zhejiang Univ-Sc A (2014) 10.1631/jzus.a1400191

[23]

Zhao "Local rolling contact fatigue and indentations on high-speed railway wheels: Observations and numerical simulations" Int J Fatigue (2017) 10.1016/j.ijfatigue.2017.05.014

[24]

Zhang "Effects of grain boundary on wear of graphene at the nanoscale: A molecular dynamics study" Carbon (2019) 10.1016/j.carbon.2018.11.067

[25]

Nguyen "Material removal and wear mechanism in abrasive polishing of SiO2/SiC using molecular dynamics" Ceram Int (2020) 10.1016/j.ceramint.2020.05.263

[26]

Zhong "Molecular dynamics simulation of severe adhesive wear on a rough aluminum substrate" J Phys D-Appl Phys (2013) 10.1088/0022-3727/46/5/055307

[27]

Yin "Study of nanoscale wear of SiC/Al nanocomposites using molecular dynamics simulations" Tribology Lett (2021) 10.1007/s11249-021-01414-0

[28]

Zeng "Investigation on rolling contact fatigue of railway wheel steel with surface defect" Wear (2020)

[29]

Xu "Investigation on wear and damage characteristics of high-speed rail steel with plasma selective quenching" Wear (2021)

[30]

Liu "Numerical investigation on wheel-rail impact contact solutions excited by rail spalling failure" Eng Fail Anal (2022) 10.1016/j.engfailanal.2022.106116

[31]

Wang "Effect of material non-uniformity and residual stress on wear and transient rolling contact behaviour in laminar plasma quenched (LPQ) rails" Wear (2023) 10.1016/j.wear.2023.204767

[32]

Cao "Investigation on the microstructure and damage characteristics of wheel and rail materials subject to laser dispersed quenching" Appl Surf Sci (2018) 10.1016/j.apsusc.2018.04.210

[33]

Stukowski "Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool" Model Simul Mater Sci Eng (2010) 10.1088/0965-0393/18/1/015012

[34]

Zhu "Study on nanoscale friction and wear mechanism of nickel-based single crystal superalloy by molecular dynamics simulations" Tribol Int (2022) 10.1016/j.triboint.2021.107322

[35]

Hepburn "Metallic-covalent interatomic potential for carbon in iron" Phys Rev B (2008) 10.1103/physrevb.78.165115

[36]

Kim "Modified embedded-atom method interatomic potentials for pure Mn and the Fe–Mn system" Acta Mater (2009) 10.1016/j.actamat.2008.09.031

[37]

UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations

A. K. Rappe, C. J. Casewit, K. S. Colwell et al.

Journal of the American Chemical Society 1992 10.1021/ja00051a040

[38]

Sutrisno "Molecular dynamic simulation on iron corrosion-reduction in high temperature molten lead-bismuth eutectic" Turk J Phys (2013)

[39]

Chen "Impact of wheel profile evolution on wheel-rail dynamic interaction and surface initiated rolling contact fatigue in turnouts" Wear (2019)

[40]

Xu "Effects of profile wear on wheel–rail contact conditions and dynamic interaction of vehicle and turnout" Adv Mech Eng (2016) 10.1177/1687814015623696

[41]

Stukowski "Automated identification and indexing of dislocations in crystal interfaces" Model Simul Mater Sci Eng (2012) 10.1088/0965-0393/20/8/085007

[42]

Yan "Rolling-sliding contact fatigue failure and associated evolutions of microstructure, crystallographic orientation and residual stress of AISI 9310 gear steel" Int J Fatigue (2023) 10.1016/j.ijfatigue.2023.107511

[43]

Xu "Influence of viscoelastic mechanical properties of rail pads on wheel and corrugated rail rolling contact at high speeds" Tribol Int (2020) 10.1016/j.triboint.2020.106523

[44]

Zhou "Experimental study on the wear and damage of wheel-rail steels under alternating temperature conditions" Wear (2021) 10.1016/j.wear.2021.203829

Cited By

18

Atomistic investigation of deformation behavior of lamellar pearlite with inclined orientation

Manjiang Yu, Fangli Duan · 2024

International Journal of Plasticity

Metrics

18

Citations

44

References

Details

Published: Jul 01, 2023
Vol/Issue: 185
Pages: 108574
License: View

Authors

K

KAI WANG

Department of Biomedical Informatics, Columbia University, 475 Riverside Dr., Mail Code 7717, New York, NY 10115, USA

Xiangtan University

Kunming University of Science and Technology

Hong Kong Polytechnic University

X

Xiaochuan Ma

Cite This Article

KAI WANG, Jun Lai, Jingmang Xu, et al. (2023). Multiscale analysis of wheel-rail rolling contact wear and damage mechanisms using molecular dynamics and explicit finite elements. Tribology International, 185, 108574. https://doi.org/10.1016/j.triboint.2023.108574

Multiscale analysis of wheel-rail rolling contact wear and damage mechanisms using molecular dynamics and explicit finite elements

You May Also Like