Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview

R. Naslain

doi:10.1016/s0266-3538(03)00230-6

journal article Feb 01, 2004

Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview

R. Naslain

Composites Science and Technology Vol. 64 No. 2 pp. 155-170 · Elsevier BV

View at Publisher Save 10.1016/s0266-3538(03)00230-6

Topics

No keywords indexed for this article. Browse by subject →

References

79

[1]

Christin F, Naslain R, Hagenmuller P, Choury JJ. Pièce poreuse carbonée densifiée in-situ par dépôt chimique en phase vapeur de matériaux réfractaires autres que le carbone et procédé de fabrication. French patent, 77/26979, September 1977.

[2]

Naslain "Synthesis and properties of new composite materials for high temperature applications based on carbon fibers and C-SiC or C-TiC hybrid matrices" Revue Chimie Minérale (1981)

[3]

Fitzer "Possibility of gas phase impregnation with silicon carbide" Rev Int Hautes Temper Refract (1980)

[4]

Marshall Acta Metall (1989) 10.1016/0001-6160(89)90291-5

[5]

Naslain R. The concept of layered interphases in SiC/SiC. In: Evans AG, Naslain R, editors. High temperature ceramic matrix composites II. Ceram Trans 1995;58:23–39.

[6]

Naslain "The design of the fibre-matrix interfacial zone in ceramic matrix composites" Composites Part A (1998) 10.1016/s1359-835x(97)00128-0

[7]

Lamouroux "Oxidation-resistant carbon fiber reinforced ceramic-matrix composites" Composites Sci Technology (1999) 10.1016/s0266-3538(98)00146-8

[8]

Bouillon "Mechanical and thermal properties of a self-healing matrix composite and determination of the life-time duration" Ceram Eng Sci Proc (2000) 10.1002/9780470294628.ch54

[9]

Jones "Radiation resistant ceramic matrix composites" J Nuclear Mater. (1997) 10.1016/s0022-3115(97)00022-6

[10]

Hino "Silicon-carbide as plasma facing or blanket material" Ceram Trans (2002) 10.1002/9781118406014.ch32

[11]

Naslain "CVD-processing of ceramic–ceramic composite materials" (1986)

[12]

Naslain "CVI-composites" (1992)

[13]

Goleki I, Morris RC, Narasimhan D, Clements N. Rapid densification of carbon–carbon composites by thermal-gradient chemical vapor infiltration. In: Evans AG, Naslain R, editors. High temperature ceramic matrix composites II. Ceram Trans 1995;58:231–6. 10.1063/1.113974

[14]

Stinton Ceram Bull (1988)

[15]

Besmann TM. CVI processing of ceramic matrix composites. In: Evans AG, Naslain R, editors. High temperature ceramic matrix composites II. Ceram Trans 1995;58:1–12.

[16]

David "Elaboration of ceramic composites by rapid densification" (1995)

[17]

Sugiyama J Mater Sci Lett (1987) 10.1007/bf01729344

[18]

Naslain "Synthesis of highly tailored ceramic matrix composites by pressure-pulsed CVI" Solid State Ionics (2001) 10.1016/s0167-2738(01)00743-3

[19]

Christin "Design, fabrication and application of C/C, C/SiC and SiC/SiC composites" (2001)

[20]

Interrante LV, Whitmarsh CW, Sherwood W. Fabrication of SiC matrix composites using a liquid polycarbosilane as the matrix source. In: Evans AG, Naslain R, editors. High temperature ceramic matrix composites II. Ceram Trans 1995;58:111–8.

[21]

Takeda "Strength of a Hi-Nicalon/silicon carbide matrix composite fabricated by the multiple polymer infiltration-pyrolysis process" J Am Ceram Soc. (1999) 10.1111/j.1151-2916.1999.tb01960.x

[22]

Zheng "Preparation and fracture behavior of carbon fiber/SiC composites by multiple impregnation and pyrolysis of polycarbosilane" J Ceram Soc Japan (1998) 10.2109/jcersj.106.1155

[23]

Tanaka "Fabrication of three-dimensional Tyranno fibre reinforced SiC composite by the polymer precursor method" Ceram Int (1998) 10.1016/s0272-8842(97)00023-0

[24]

Hurwitz "Filler/polycarbosilane systems as CMC matrix precursors" Ceram Eng Sci Proc (1998)

[25]

Guo "Mechanical behavior of BN-coated Hi-Nicalon SiC fiber-SiC matrix composite at room and high temperatures" Ceram Eng Sci Proc (1999)

[26]

Kotani "Fabrication of high performance SiC/SiC composite by polymer impregnation and pyrolysis method" Ceram Eng Sci Proc (1999) 10.1002/9780470294574.ch36

[27]

Moraes "The effect of particulate fillers on the processing and properties of a fiber-reinforced polymer precursor derived SiC-matrix composite" Ceram Eng Sci Proc (2000) 10.1002/9780470294628.ch33

[28]

Luthra "Toughened Silcomp composites-process and preliminary properties" Amer Ceram Soc Bull (1993)

[29]

Hillig "Making ceramic composites by melt infiltration" Am Ceram Soc Bull (1994)

[30]

Corman GS, Brun MK, Luthra KL. SiC fiber reinforced SiC-Si matrix composites prepared by melt infiltration (MI) for gas turbine engine applications. In: Int. Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, 7–10 June 1999. 3 Park Avenue, New York: ASME; 1999. 10.1115/99-gt-234

[31]

Fabig "Principles and new aspects in LSI-processing" (1999)

[32]

Shobu "SiC-intermetallics composites fabricated by melt infiltration" Key Engin Mater. (1999) 10.4028/www.scientific.net/kem.159-160.325

[33]

Nakano "Carbon fiber reinforced silicon carbide composites" (1990)

[34]

Kohyama "Development of SiC/SiC composites by nano-infiltration and transient eutectic (NITE) process" Ceram Eng Sci Proc (2000)

[35]

Katoh "Microstructure and properties of liquid phase sintered SiC/SiC composites" Ceram Eng Sci Proc (2002)

[36]

Katoh "A novel processing technique of silicon carbide-based ceramic composites for high temperature applications" Ceram Trans (2002) 10.1002/9781118406014.ch6

[37]

Nakano "Processing and characterization of 3D carbon fiber reinforced silicon carbide and silicon nitride matrix composites" Ceram Trans (1998)

[38]

Suzuki "Fabrication and characterization of 3D-C/SiC composites via slurry and PCVI joint process" Key Engin Mater (1999) 10.4028/www.scientific.net/kem.164-165.113

[39]

Lamouroux "Oxidation effects on the mechanical properties of 2D woven C/SiC composites" J Eur Ceram Soc. (1994) 10.1016/0955-2219(94)90105-8

[40]

Ichikawa H, Okamura K, Seguchi T. Oxygen-free ceramic fibers from organosilicon precursors and E-beam curing. In: Evans AG, Naslain R, editors. High temperature ceramic matrix composites II. Ceram Trans 1995;58:65–74.

[41]

Chollon G, Pailler R, Naslain R, Olry P. Structure, composition and mechanical behavior at high temperature of the oxygen-free Hi-Nicalon fiber. In: Evans AG, Naslain R, editors. High temperature ceramic matrix composites II. Ceram Trans 1995;58:299–304.

[42]

Ishikawa "A thermally conductive SiC-polycrystalline fiber and its fiber-bonded ceramic" Ceram Eng Sci Proc (2001) 10.1002/9780470294680.ch55

[43]

Lipowitz "Structure and properties of Sylramic silicon carbide fiber—a polycrystalline, stoichimetric β-SiC composition" Ceram Eng Sci Proc (1997) 10.1002/9780470294437.ch16

[44]

Baldus "Properties of amorphous SiBCN-ceramic fibers" Key Eng Mater (1997) 10.4028/www.scientific.net/kem.127-131.177

[45]

Kerans "Interface design for oxidation-resistant ceramic composites" J Am Ceram Soc. (2002) 10.1111/j.1151-2916.2002.tb00505.x

[46]

Naslain "The design of the fibre-matrix interfacial zone in ceramic matrix composites" Composites Part A (1998) 10.1016/s1359-835x(97)00128-0

[47]

Naslain "Boron nitride interphase in ceramic matrix composites" J Am Ceram Soc. (1991) 10.1111/j.1151-2916.1991.tb06789.x

[48]

Morscher "Environmental durability of BN-based interphases (for SiCf/SiCw composites) in H2O containing atmospheres at intermediate temperatures" Ceram Eng Sci Proc (2000)

[49]

Yun "Tensile behavior of SiC/SiC composites reinforced by treated Sylramic SiC fibers" Ceram Eng Sci Proc (2001) 10.1002/9780470294680.ch60

[50]

Naslain "Synthesis of highly tailored ceramic matrix composites by pressure-pulsed CVI" Solid State Ionics (2001) 10.1016/s0167-2738(01)00743-3

Showing 50 of 79 references

Cited By

1,570

Influence of porosity and pore size on the heat transfer characteristics of ceramic matrix composites plate

Kun Du, Rui Gong · 2026

Applied Thermal Engineering

Microstructure evolution of SiC/SiC composite ablated under an oxyacetylene torch

Zhongmin Li, Zhonghao Liu · 2026

Journal of the European Ceramic Soc...

Design and construction of the interphase in SiCf/SiC composites: From mechanical performance requirements to structure-function integration

Hang Jia, Shanhua Liu · 2026

Materials Today Electronics

Resistance to cyclic oxidation and evolution of oxide scale in 2.5D and 3D Cf/SiC composites with Si-B-C added matrix

Ramya Krishna, A. Udayakumar · 2025

Journal of the European Ceramic Soc...

Oxide‐Based Ceramic Matrix Composites for High‐Temperature Environments: A Review

Karthikeyan Ramachandran, Joseph C. Bear · 2025

Advanced Engineering Materials

Multiphysics model of thermomechanical oxidative degradation in SiC/SiC ceramic matrix composite microstructures

M.H. Hamza, Jacob J. Schichtel · 2025

Journal of the European Ceramic Soc...

The application progress and future recommendations of nuclear energy in the marine resource development field

Na Wei, Haoran Zheng · 2025

Progress in Nuclear Energy

Nanosecond laser ablation behavior of C/SiC composites under water layer protection: Experiments and theoretical investigation

Shuai Yan, Quanwei Diao · 2024

Optics & Laser Technology

Processing and characterization of 2D woven ZrB 2 ‐based ultrahigh‐temperature ceramic matrix composites

Manish Patel, Kurapati Pavan Kumar · 2023

International Journal of Applied Ce...

SiC/SiC ceramic matrix composites with BN interphase produced by gas phase routes: An overview

Pierre Fenetaud, Sylvain Jacques · 2023

Open Ceramics

Boron nitride (BN) and BN based multiple-layer interphase for SiCf/SiC composites: A review

Maolin Chen, Ling Pan · 2022

Ceramics International

Effect of poly(diallyldimethylammonium chloride) adsorption on the dispersion features of SiC particles in aqueous media

Yifan Niu, Wenxiao Zhang · 2021

New Journal of Chemistry

Machining of SiC ceramic matrix composites: A review

QingLong An, Jie Chen · 2021

Chinese Journal of Aeronautics

Effect of pyrolytic carbon interphase on mechanical properties of mini T800-C/SiC composites

Donglin Zhao, Tong Guo · 2021

Journal of Advanced Ceramics

Multiscale characterization and representation of variability in ceramic matrix composites

Khaled H Khafagy, Siddhant Datta · 2021

Journal of Composite Materials

Modeling creep behavior in ceramic matrix composites

Khaled H. Khafagy, Christopher Sorini · 2021

Ceramics International

Dry sliding tribological behavior of C/SiC under different load and speed

Bin Lin, Jinhua Wei · 2021

Ceramics International

Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review

Yutaro Arai, Ryo Inoue · 2019

Ceramics International

A damage-induced short-circuit diffusion model applied to the oxidation calculation of ceramic matrix composites (CMCs)

Yunong Zhao, Yanfei Chen · 2019

Composites Part A: Applied Science...

Accident tolerant fuel cladding development: Promise, status, and challenges

Kurt A. Terrani · 2018

Journal of Nuclear Materials

Metrics

1,570

Citations

79

References

Details

Published: Feb 01, 2004
Vol/Issue: 64(2)
Pages: 155-170
License: View

Authors

R

R. Naslain

Cite This Article

R. Naslain (2004). Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Composites Science and Technology, 64(2), 155-170. https://doi.org/10.1016/s0266-3538(03)00230-6

Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview

You May Also Like