Optimal Control of the Sintering Strain Rate of Yttria-Stabilized Zirconia Electrolytes for Solid Oxide Fuel Cells Using a Thermal−Mechanical Analyzer during the Sintering Process

Leo Chau-Kuang Liau; Rung-Kang Wu

doi:10.1021/ie801435e

journal article Jul 14, 2009

Optimal Control of the Sintering Strain Rate of Yttria-Stabilized Zirconia Electrolytes for Solid Oxide Fuel Cells Using a Thermal−Mechanical Analyzer during the Sintering Process

Leo Chau-Kuang Liau Rung-Kang Wu

Industrial & Engineering Chemistry Research Vol. 48 No. 16 pp. 7567-7573 · American Chemical Society (ACS)

View at Publisher Save 10.1021/ie801435e

Topics

No keywords indexed for this article. Browse by subject →

References

14

[1]

Singhal S. C. (2003)

[2]

Lewis J. A. Annu. Rev. Mater. Sci. (1997) 10.1146/annurev.matsci.27.1.147

[3]

Tsai D. T. AIChE J. (1991) 10.1002/aic.690370408

[4]

Lombardo S. J. Ceram. Trans. (2005) 10.1002/9781118407820.ch18

[5]

Liau L. C.-K. Ind. Eng. Chem. Res. (2005) 10.1021/ie049143a

[6]

Feng K. J. Am. Ceram. Soc. (2003) 10.1111/j.1151-2916.2003.tb00005.x

[7]

Feng Z. C. J. Appl. Mechan. (2002)

[8]

Liau L.C.-K. J. Power Sources (2008) 10.1016/j.jpowsour.2007.11.041

[9]

Chen D.-J. J. Am. Ceram. Soc. (1996) 10.1111/j.1151-2916.1996.tb08524.x

[10]

Han M. J. Power Sources (2008) 10.1016/j.jpowsour.2006.11.054

[11]

Barsoum M. W. (1997)

[12]

Olevsky E. A. Mater. Sci. Eng. Rep. (1998) 10.1016/s0927-796x(98)00009-6

[13]

Chartier T. J. Eur. Ceram. Soc. (1997) 10.1016/s0955-2219(96)00131-8

[14]

Chen C.-C. Electrochem. Soc. Trans. (2007)

Metrics

5

Citations

14

References

Details

Published: Jul 14, 2009
Vol/Issue: 48(16)
Pages: 7567-7573

Authors

L

Leo Chau-Kuang Liau

Yuan Ze Fuel Cell Center, Department of Chemical Engineering and Materials Science, Yuan Ze University, Chung-Li 320, Taiwan

R

Rung-Kang Wu

Yuan Ze Fuel Cell Center, Department of Chemical Engineering and Materials Science, Yuan Ze University, Chung-Li 320, Taiwan

Cite This Article

Leo Chau-Kuang Liau, Rung-Kang Wu (2009). Optimal Control of the Sintering Strain Rate of Yttria-Stabilized Zirconia Electrolytes for Solid Oxide Fuel Cells Using a Thermal−Mechanical Analyzer during the Sintering Process. Industrial & Engineering Chemistry Research, 48(16), 7567-7573. https://doi.org/10.1021/ie801435e

Optimal Control of the Sintering Strain Rate of Yttria-Stabilized Zirconia Electrolytes for Solid Oxide Fuel Cells Using a Thermal−Mechanical Analyzer during the Sintering Process

You May Also Like