Topics

No keywords indexed for this article. Browse by subject →

References
45
[1]
Halls, J. J. M. et al. Efficient photodiodes from interpenetrating networks. Nature 376, 498–500 (1995). 10.1038/376498a0
[2]
Yu, G., Gao, J., Hummelen, J. C., Wudl, F. & Heeger, A. J. Polymer photovoltaic cells: Enhanced efficiencies via a network of internal donor–acceptor heterojunctions. Science 270, 1789–1791 (1995). 10.1126/science.270.5243.1789
[3]
Hoppe, H. & Sariciftci, N. S. Morphology of polymer/fullerene bulk heterojunction solar cells. J. Mater. Chem. 16, 45–61 (2006). 10.1039/b510618b
[4]
Shaheen, S. E. et al. 2.5% efficient organic plastic solar cells. Appl. Phys. Lett. 78, 841–843 (2001). 10.1063/1.1345834
[5]
Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology

W. Ma, C. Yang, X. Gong et al.

Advanced Functional Materials 2005 10.1002/adfm.200500211
[6]
Reyes-Reyes, M., Kim, K. & Carroll, D. L. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6) C61 blends. Appl. Phys. Lett. 87, 083506 (2005). 10.1063/1.2006986
[7]
A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells

Youngkyoo Kim, Steffan Cook, Sachetan M. Tuladhar et al.

Nature Materials 2006 10.1038/nmat1574
[8]
Li, G. et al. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends. Nature Mater. 4, 864–868 (2005). 10.1038/nmat1500
[9]
Kim, Y. et al. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene. Appl. Phys. Lett. 86, 063502 (2005). 10.1063/1.1861123
[10]
Vanlaeke, P. et al. Polythiophene based bulk heterojunction solar cells: Morphology and its implications. Thin Solid Films 511–512, 358–361 (2006). 10.1016/j.tsf.2005.12.031
[11]
Origin of the enhanced performance in poly(3-hexylthiophene): [6,6]-phenyl C61-butyric acid methyl ester solar cells upon slow drying of the active layer

Valentin D. Mihailetchi, Hangxing Xie, Bert de Boer et al.

Applied Physics Letters 2006 10.1063/1.2212058
[12]
Kim, K., Liu, J. & Carroll, D. L. Thermal diffusion processes in bulk heterojunction formation from poly-3-hexylthiophene/C60 single heterojunction photovoltaics. Appl. Phys. Lett. 88, 181911 (2006). 10.1063/1.2199970
[13]
Chirvase, D., Parisi, J., Hummelen, J. C. & Dyakonov, V. Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites. Nanotechnology 15, 1317–1323 (2004). 10.1088/0957-4484/15/9/035
[14]
Zhao, Y., Xie, Z., Qu, Y., Geng, Y. & Wang, L. Solvent-vapor treatment induced performance enhancement of poly(3-hexylthiophene):methanofullerene bulk-heterojunction photovoltaic cells. Appl. Phys. Lett. 90, 043504 (2007). 10.1063/1.2434173
[15]
Osterbacka, R., An, C. P., Jiang, X. M. & Vardeny, Z. V. Two-dimensional electronic excitations in self-assembled conjugated polymer nanocrystals. Science 287, 839–842 (2000). 10.1126/science.287.5454.839
[16]
Zhokhavets, V., Erb, T., Gobsch, G., Al-Ibrahim, M. & Ambacher, O. Relation between absorption and crystallinity of poly(3-hexylthiophene)/fullerene films for plastic solar cells. Chem. Phys. Lett. 418, 347–350 (2006). 10.1016/j.cplett.2005.11.020
[17]
Vanlaeke, P. et al. P3HT/PCBM bulk heterojunction solar cells: Relation between morphology and electro-optical characteristics. Sol. Energy Mater. Sol. Cells 90, 2150–2158 (2006). 10.1016/j.solmat.2006.02.010
[18]
Klimov, E., Li, W., Yang, X., Hoffmann, G. G. & Loos, J. Scanning near-field and confocal Raman microscopic investigation of P3HT-PCBM systems for solar cell applications. Macromolecules 39, 4493–4496 (2006). 10.1021/ma052590x
[19]
Nanoscale Morphology of High-Performance Polymer Solar Cells

Xiaoniu Yang, Joachim Loos, Sjoerd C. Veenstra et al.

Nano Letters 2005 10.1021/nl048120i
[20]
Zhokhavets, V., Erb, T., Hoppe, H., Gobsch, G. & Sariciftci, N. S. Effect of annealing of poly(3-hexylthiophene)/fullerene bulk heterojunction composites on structural and optical properties. Thin Solid Films 496, 679–682 (2006). 10.1016/j.tsf.2005.09.093
[21]
Savenije, T. J., Kroeze, J. E., Yang, X. & Loos, J. The effect of thermal treatment on the morphology and change carrier dynamics in a polythiophene-fullerene bulk heterojunction. Adv. Funct. Mater. 15, 1260–1266 (2005). 10.1002/adfm.200400559
[22]
Swinnen, A. et al. Tuning the dimensions of C60-based needlelike crystals in blended thin films. Adv. Funct. Mater. 16, 760–765 (2006). 10.1002/adfm.200500812
[23]
Yang, X., Alexeev, A., Michels, A. J. & Loos, J. Effect of spatial confinement on the morphology evolution of thin poly(p-phenylenevinylene)/methanofullerene composite films. Macromolecules 38, 42890–4295 (2005).
[24]
Tompkins, H. G. & Irene, E. A. (eds) Handbook of Ellipsometry (William Andrew Publishing, Norwich, New York, 2005). 10.1007/3-540-27488-x
[25]
Fried, M. et al. Dose-dependence of ion implantation-caused damage in silicon measured by ellipsometry and backscattering spectrometry. Thin Solid Films 455, 404–409 (2004). 10.1016/j.tsf.2004.01.027
[26]
Zaumseil, P., Krüger, D., Kurps, R., Fursenko, O. & Formanek, P. Precise measurement of Ge depth profiles in SiGe HBT’s—a comparison of different methods. Solid State Phenom. 95–96, 473–482 (2004).
[27]
Reyes-Reyes, M. et al. Meso-structure formation for enhanced organic photovoltaic cells. Org. Lett. 7, 5749–5752 (2005). 10.1021/ol051950y
[28]
Waldauf, C. et al. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact. Appl. Phys. Lett. 89, 233517 (2006). 10.1063/1.2402890
[29]
Goffri, S. et al. Multicomponent semiconducting polymer systems with low crystallization-induced percolation threshold. Nature Mater. 5, 950–956 (2006). 10.1038/nmat1779
[30]
Arias, A. C. et al. Vertically segregated polymer-blend photovoltaic thin-film structures through surface-mediated solution processing. Appl. Phys. Lett. 80, 1694–1697 (2002). 10.1063/1.1456550
[31]
Björnström, C. M. et al. Multilayer formation in spin-coated thin films of low-bandgap polyfluorene:PCBM blends. J. Phys. Condens. Matter 17, L529–L534 (2005). 10.1088/0953-8984/17/50/l01
[32]
Björnström, C. M. et al. Vertical phase separation in spin-coated films of a low bandgap polyfluorene/PCBM blend—effects of specific substrate interaction. Appl. Surf. Sci. 253, 3906–3912 (2007). 10.1016/j.apsusc.2006.08.024
[33]
Heriot, S. Y. & Jones, R. A. L. An interfacial instability in a transient wetting layer leads to lateral phase separation in thin spin-cast polymer-blend films. Nature Mater. 4, 782–786 (2005). 10.1038/nmat1476
[34]
Snaith, H. J., Greenham, N. C. & Friend, R. H. The origin of collected charge and open-circuit voltage in blended polyfluorene photovoltaic devices. Adv. Mater. 16, 1640–1645 (2004). 10.1002/adma.200305766
[35]
Xue, J., Rand, B. P., Uchida, S. & Forrest, S. R. Mixed donor–acceptor molecular heterojunctions for photovoltaic applications. II. Devices performance. J. Appl. Phys. 98, 124903 (2005). 10.1063/1.2142073
[36]
Heutz, S., Sullivan, P., Sanderson, B. M., Schultes, S. M. & Jones, T. S. Influence of molecular architecture and intermixing on the photovoltaic, morphological and spectroscopic properties of CuPc–C60 heterojunctions. Sol. Energy Mater. Sol. Cells 83, 229–245 (2004). 10.1016/j.solmat.2004.02.027
[37]
Sims, M. et al. On the use of optical probes to monitor the thermal transitions in spin-coated poly(9,9-dioctylfluorene) films. J. Phys. Condens. Matter 17, 1–12 (2005). 10.1088/0953-8984/17/41/002
[38]
Kim, H., So, W.-W. & Moon, S.-J. Effect of thermal annealing on the performance of P3HT/PCBM polymer photovoltaic cells. J. Kor. Phys. Soc. 48, 441–445 (2006).
[39]
Si, L., Massa, M. V., Dalnoki-Veress, K., Brown, H. R. & Jones, R. A. L. Chain entanglement in thin freestanding polymer films. Phys. Rev. Lett. 94, 127801 (2005). 10.1103/physrevlett.94.127801
[40]
Ellison, C. J. & Torkelson, J. M. The distribution of glass-transition temperatures in nanoscopically confined glass formers. Nature Mater. 2, 695–700 (2003). 10.1038/nmat980
[41]
Sharp, J. S. & Forrest, J. A. Free surfaces cause reductions in the glass transition temperature of thin polystyrene films. Phys. Rev. Lett. 91, 235701 (2003). 10.1103/physrevlett.91.235701
[42]
Campoy-Quiles, M., Sims, M., Etchegoin, P. G. & Bradley, D. D. C. Thickness-dependent thermal transition temperatures in thin conjugated polymer films. Macromolecules 39, 7673–7680 (2006). 10.1021/ma0605752
[43]
van Zanten, J. H., Wallace, W. E. & Wu, W.-L. Effect of strongly favourable substrate interaction on the thermal properties of ultrathin polymer films. Phys. Rev. E 53, R2053–R2056 (1996). 10.1103/physreve.53.r2053
[44]
Hummelen, J. C. et al. Preparation and characterization of fulleroid and methanofullerene derivatives. J. Org. Chem. 60, 532–538 (1995). 10.1021/jo00108a012
[45]
Campoy-Quiles, M. et al. Ellipsometric characterization of the optical constants of polyfluorene gain media. Adv. Funct. Mater. 15, 925–933 (2005). 10.1002/adfm.200400121
Cited By
1,363
Progress Toward Stable Organic Solar Cells

Newayemedhin A. Tegegne, Leonato T. Nchinda · 2024

Advanced Optical Materials
Benzothiadiazole-based non-fullerene acceptors

Qingling Nie, Ailing Tang · 2021

Nano Energy
EnergyChem
Materials Horizons
Journal of the American Chemical So...
The Journal of Physical Chemistry C
Energy Environ. Sci.
Related

You May Also Like

The rise of graphene

A. K. Geim, K. S. Novoselov · 2007

39,011 citations

Materials for electrochemical capacitors

Patrice Simon, Yury Gogotsi · 2008

15,249 citations

Complex thermoelectric materials

G. Jeffrey Snyder, Eric S. Toberer · 2008

10,461 citations

Nanostructured materials for advanced energy conversion and storage devices

Antonino Salvatore Aricò, Peter Bruce · 2005

8,326 citations