journal article Oct 01, 2023

Experimental Investigations on the Soil–Water Characteristic Curve and the Deformation Behaviors of Unsaturated Cement–Stabilized Soft Clay

View at Publisher Save 10.1061/ijgnai.gmeng-8581
Topics

No keywords indexed for this article. Browse by subject →

References
51
[3]
A constitutive model for partially saturated soils

E. E. Alonso, A. Gens, A. Josa

Géotechnique 10.1680/geot.1990.40.3.405
[5]
ASTM. 2010a. Standard test method for liquid limit, plastic limit, and plasticity index of soils. ASTM D4318. West Conshohocken, PA: ASTM.
[6]
ASTM. 2010b. Standard test methods for specific gravity of soil solids by water pycnometer. ASTM D854. West Conshohocken, PA: ASTM.
[7]
ASTM. 2011. Standard practice for classification of soils for engineering purposes (unified soil classification system). ASTM D2487. West Conshohocken, PA: ASTM.
[8]
ASTM. 2019. Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass. ASTM D2216. West Conshohocken, PA: ASTM.
[9]
Bai, F. Q., S. H. Liu, and J. Yuan. 2011. “Calibration test for total suction wetting curve of filter paper.” [In Chinese.] Rock Soil Mech. 32 (8): 2336–2340.
[11]
A natural compression law for soils (an advance on e–log p′)

R. Butterfield

Géotechnique 10.1680/geot.1979.29.4.469
[17]
Futai, M. M., and M. de Souza Scares de Almeida. 2002. “Collapsible soil: A theoretical and experimental study.” Electron. J. Geotech. Eng. 7: 16.
[19]
Hydromechanical behavior of unsaturated soil with different initial densities over a wide suction range

You Gao, De’an Sun, Zancheng Zhu et al.

Acta Geotechnica 10.1007/s11440-018-0662-5
[21]
Gautam, S., L. R. Hoyos, S. He, S. Prabakar, and X. Yu. 2020. “Chemical treatment of a highly expansive clay using a liquid ionic soil stabilizer.” Geotech. Geol. Eng. 38: 4981–4993. https://doi.org/10.1007/s10706-020-01342-1. 10.1007/s10706-020-01342-1
[22]
Greenspan, L. 1977. “Humidity fixed points of binary saturated aqueous solutions.” J. Res. Natl. Bur. Stand. Sect. A: Phys. Chem. 81A (1): 89–96. https://doi.org/10.6028/jres.081A.011. 10.6028/jres.081a.011
[33]
Liu, W., W. Li, and X. Sun. 2022a. “Investigation of drying−wetting durability of cement-stabilised clayey soil.” Proc. Inst. Civ. Eng. Ground Improv. 175 (2): 139–149. https://doi.org/10.1680/jgrim.20.00024. 10.1680/jgrim.20.00024
[37]
Lu, N., and W. J. Likos. 2004. Unsaturated soil mechanics. Hoboken, NJ: Wiley.
[39]
Morra, M., E. Occhiello, and F. Garbassi. 1990. “Knowledge about polymer surfaces from contact angle measurements.” Adv. Colloid Interface Sci. 32: 79–116. https://doi.org/10.1016/0001-8686(90)80012-O. 10.1016/0001-8686(90)80012-o
[41]
Sasanian, S., and T. A. Newson. 2014. “Basic parameters governing the behaviour of cement-treated clays.” Soils Found. 54 (2): 209–224. https://doi.org/10.1016/j.sandf.2014.02.011. 10.1016/j.sandf.2014.02.011
[42]
Tu, H., and S. K. Vanapalli. 2016. “Prediction of the variation of swelling pressure and one-dimensional heave of expansive soils with respect to suction using the soil–water retention curve as a tool.” Can. Geotech. J. 53: 1213–1234. https://doi.org/10.1139/cgj-2015-0222. 10.1139/cgj-2015-0222
[43]
A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils

M. Th. van Genuchten

Soil Science Society of America Journal 10.2136/sssaj1980.03615995004400050002x
[46]
Wang, X. D., X. F. Peng, J. F. Lu, and B. X. Wang. 2003. “Measuring technique of contact angle and contact angle hysteresis on rough solid surfaces I: Measuring technique of contact angle.” [In Chinese.] J. Basic Sci. Eng. 11 (2): 174–184.
[48]
An elasto-plastic critical state framework for unsaturated soil

S. J. Wheeler, V. Sivakumar

Géotechnique 10.1680/geot.1995.45.1.35
[49]
Yin, J. H., and C. K. Lai. 1998. “Strength and stiffness of Hong Kong marine deposits mixed with cement.” Geotech. Eng. 29 (1): 29–44.

Showing 50 of 51 references