journal article Open Access Feb 01, 2021

Effect of film structure on CH3NH3PbI3 perovskite thin films’ degradation

View at Publisher Save 10.1063/5.0030610
Abstract
The instability of CH3NH3PbI3 perovskite hybrid organic–inorganic films is a serious problem, which might be a drawback for their use in solar energy conversion. In this work, we have evaluated the degradation of the perovskite films and studied the influence of film morphology on their degradation. CH3NH3PbI3 perovskite thin films were deposited on glass substrates by a spin coating technique at different centrifugation speeds using different solvents. This study aims to determine the films’ properties that may control the degradation process. This study was based on the comparison between the characteristics determined from XRD analysis and optical transmittance of freshly deposited films and those aged 1 year in ambient air at room temperature and dark conditions. The degradation was manifested by the partial decomposition of the perovskite to PbI2, I2, and metallic lead. The degradation evaluation was achieved by the determination of the variation of the most intense XRD diffraction peak in the freshly prepared film and after aging. The results indicated that the degradation is very sensitive to the films’ porosity and thickness. Reducing the thickness of the film or increasing the porosity enhances the degradation process.
Topics

No keywords indexed for this article. Browse by subject →

References
43
[1]
Semiconducting Tin and Lead Iodide Perovskites with Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties

Constantinos C. Stoumpos, Christos D. Malliakas, Mercouri G. Kanatzidis

Inorganic Chemistry 2013 10.1021/ic401215x
[2]
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3

Guichuan Xing, Nripan Mathews, Shikuan Sun et al.

Science 2013 10.1126/science.1243167
[3]
Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber

Samuel D. Stranks, Giles E. Eperon, Giulia Grancini et al.

Science 2013 10.1126/science.1243982
[4]
"Solid-state mesostructured perovskite CH3NH3PbI3 solar cells: Charge transport, recombination, and diffusion length" J. Phys. Chem. Lett. (2014) 10.1021/jz500003v
[5]
"Novel photoelectrochemical cell with mesoscopic electrodes sensitized by lead-halide compounds"
[6]
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima, Kenjiro Teshima, Yasuo Shirai et al.

Journal of the American Chemical Society 2009 10.1021/ja809598r
[7]
Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%

Hui-Seon Kim, Chang-Ryul Lee, Jeong-Hyeok Im et al.

Scientific Reports 2012 10.1038/srep00591
[8]
Sequential deposition as a route to high-performance perovskite-sensitized solar cells

Julian Burschka, Norman Pellet, Soo-Jin Moon et al.

Nature 2013 10.1038/nature12340
[9]
Efficient planar heterojunction perovskite solar cells by vapour deposition

Mingzhen Liu, Michael B. Johnston, Henry J. Snaith

Nature 2013 10.1038/nature12509
[10]
"Planar heterojunction perovskite solar cells via vapor-assisted solution process" J. Am. Chem. Soc. (2014) 10.1021/ja411509g
[11]
"Three-step sequential solution deposition of PbI2-free CH3NH3PbI3 perovskite" J. Mater. Chem. A (2015) 10.1039/c4ta05384b
[12]
"Perovskites: The emergence of a new era for low-cost, high-efficiency solar cells" J. Phys. Chem. Lett. (2013) 10.1021/jz4020162
[13]
"Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells" Nat. Commun. (2013) 10.1038/ncomms3885
[14]
"Current state and perspectives for organo-halide perovskite solar cells. Part 1. Crystal structures and thin film formation, morphology, processing, degradation, stability improvement by carbon nanotubes. A review" Mod. Electron. Mater. (2017) 10.1016/j.moem.2017.05.001
[15]
"Chemical interaction dictated energy level alignment at the N,N′-dipentyl-3,4,9,10-perylenedicarboximide/CH3NH3PbI3 interface" Chem. Phys. Lett. (2016) 10.1016/j.cplett.2015.12.046
[16]
"Atomistic origins of high-performance in hybrid halide perovskite solar cells" Nano Lett. (2014) 10.1021/nl500390f
[17]
"Transformation of the excited state and photovoltaic efficiency of CH3NH3PbI3 perovskite upon controlled exposure to humidified air" J. Am. Chem. Soc. (2015) 10.1021/ja511132a
[18]
"Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques" ACS Nano (2015) 10.1021/nn506864k
[19]
"Organic–inorganic lead halide perovskite solar cell materials: A possible stability problem" Chem. Phys. Lett. (2015) 10.1016/j.cplett.2014.11.063
[20]
"On the degradation mechanism of functioning solar cells based on organic-inorganic perovskites" Appl. Sol. Energy (2014) 10.3103/s0003701x14040100
[21]
"Influence of air degradation on morphology, crystal size and mechanical hardness of perovskite film" Mater. Lett. (2018) 10.1016/j.matlet.2018.06.126
[22]
"Improved understanding of the electronic and energetic landscapes of perovskite solar cells: High local charge carrier mobility, reduced recombination, and extremely shallow traps" J. Am. Chem. Soc. (2014) 10.1021/ja506936f
[23]
"Impact of white light illumination on the electronic and chemical structures of mixed halide and single crystal perovskites" Adv. Opt. Mater. (2017) 10.1002/adom.201700139
[24]
"Effect of temperature on light induced degradation in methylammonium lead iodide perovskite thin films and solar cells" Sol. Energy Mater. Sol. Cells (2018) 10.1016/j.solmat.2017.09.053
[25]
"Fabrication of efficient planar perovskite solar cells using a one-step chemical vapor deposition method" Sci. Rep. (2015) 10.1038/srep14083
[26]
"Influence of annealing temperature on the crystallization and ferroelectricity of perovskite CH3NH3PbI3 film" Appl. Surf. Sci. (2015) 10.1016/j.apsusc.2015.09.023
[27]
"High efficiency flexible perovskite solar cells using superior low temperature TiO2" Energy Environ. Sci. (2015) 10.1039/c4ee03907f
[28]
"Organometal halide perovskite thin films and solar cells by vapor deposition" J. Mater. Chem. A (2016) 10.1039/c5ta08963h
[29]
"Modulating crystal grain size and optoelectronic properties of perovskite films for solar cells by reaction temperature" Nanoscale (2016) 10.1039/c5nr08935b
[30]
"Rapid composition screening for perovskite photovoltaics via concurrently pumped ultrasonic spray coating" J. Mater. Chem. A (2016) 10.1039/c6ta00739b
[31]
"Two–steps ultrasonic spray deposition of CH3NH3PbI3 for efficient and large area perovskite solar cell" Nano Energy (2016) 10.1016/j.nanoen.2016.07.026
[32]
Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells

Jeong-Hyeok Im, In-Hyuk Jang, Norman Pellet et al.

Nature Nanotechnology 2014 10.1038/nnano.2014.181
[33]
"Parameters that control and influence the organo-metal halide perovskite crystallization and morphology" Front. Optoelectron. (2016) 10.1007/s12200-016-0630-3
[34]
"Solvent and spinning speed effects on CH3NH3PbI3 films deposited by spin coating" Phys. Status Solidi A (2019) 10.1002/pssa.201900340
[35]
Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells

Wei Zhang, Sandeep Pathak, Nobuya Sakai et al.

Nature Communications 2015 10.1038/ncomms10030
[36]
"Improving UV stability of MAPbI3 perovskite thin films by bromide incorporation" J. Alloys Compd. (2018) 10.1016/j.jallcom.2018.02.240
[37]
"Light-induced degradation of CH3NH3PbI3 hybrid perovskite thin film" J. Phys. Chem. C (2017) 10.1021/acs.jpcc.6b11853
[38]
"Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells" J. Mater. Chem. (2013) 10.1039/c3ta13606j
[39]
"Influence of radiation on the properties and the stability of hybrid perovskites" Adv. Electron. Mater. (2017) 10.1002/aelm.201700158
[40]
"Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells" Energy Environ. Sci. (2016) 10.1039/c6ee90023b
[41]
"UV degradation and recovery of perovskite solar cells" Sci. Rep. (2016) 10.1038/srep38150
[42]
"Mechanisms for light induced degradation in MAPbI3 perovskite thin films and solar cells" Appl. Phys. Lett. (2016) 10.1063/1.4967840
[43]
"The role of oxygen in the degradation of methylammonium lead trihalide perovskite photoactive layers" Angew. Chem., Int. Ed. (2015) 10.1002/anie.201503153
Cited By
7