Hard X-ray wavefront correction via refractive phase plates made by additive and subtractive fabrication techniques

Frank Seiboth; Dennis Brückner; Maik Kahnt; Mikhail Lyubomirskiy; Felix Wittwer; Dmitry Dzhigaev; Tobias Ullsperger; Stefan Nolte; Frieder Koch; Christian David; Jan Garrevoet; Gerald Falkenberg; Christian G. Schroer

doi:10.1107/s1600577520007900

journal article Open Access Jul 30, 2020

Hard X-ray wavefront correction via refractive phase plates made by additive and subtractive fabrication techniques

Frank Seiboth Dennis Brückner Maik Kahnt Mikhail Lyubomirskiy Felix Wittwer Dmitry Dzhigaev

Tobias Ullsperger Stefan Nolte

Frieder Koch Christian David

Jan Garrevoet

Gerald Falkenberg

Christian G. Schroer

Journal of Synchrotron Radiation Vol. 27 No. 5 pp. 1121-1130 · International Union of Crystallography (IUCr)

View at Publisher Save 10.1107/s1600577520007900

Abstract

Modern subtractive and additive manufacturing techniques present new avenues for X-ray optics with complex shapes and patterns. Refractive phase plates acting as glasses for X-ray optics have been fabricated, and spherical aberration in refractive X-ray lenses made from beryllium has been successfully corrected. A diamond phase plate made by femtosecond laser ablation was found to improve the Strehl ratio of a lens stack with a numerical aperture (NA) of 0.88 × 10−3 at 8.2 keV from 0.1 to 0.7. A polymer phase plate made by additive printing achieved an increase in the Strehl ratio of a lens stack at 35 keV with NA of 0.18 × 10−3 from 0.15 to 0.89, demonstrating diffraction-limited nanofocusing at high X-ray energies.

Topics

No keywords indexed for this article. Browse by subject →

References

51

[1]

Alianelli J. Appl. Phys. (2010) 10.1063/1.3517060

[2]

Antipov, S., Assoufid, L., Grizolli, W., Qian, J. & Shi, X. (2018). Proceedings of the 9th International Particle Accelerator Conference (IPAC'18), 29 April-4 May 2018, Vancouver, BC, Canada, pp. 4057-4058. THPMF011.

[3]

Bernert Opt. Express (2017) 10.1364/oe.25.031640

[4]

Celestre J. Synchrotron Rad. (2020) 10.1107/s1600577519017235

[5]

Heimann J. Synchrotron Rad. (2016) 10.1107/s1600577516001636

[6]

Hettel J. Synchrotron Rad. (2014) 10.1107/s1600577514011515

[7]

Hönig Opt. Express (2011) 10.1364/oe.19.016324

[8]

Jiao J. Synchrotron Rad. (2018) 10.1107/s1600577518012110

[9]

Kewish Opt. Express (2010) 10.1364/oe.18.023420

[10]

Kewish Ultramicroscopy (2010) 10.1016/j.ultramic.2010.01.004

[11]

Kiss J. Eur. Opt. Soc.-Rapid Publ. (2016) 10.1186/s41476-016-0002-z

[12]

Koyama Rev. Sci. Instrum. (2016) 10.1063/1.4950723

[13]

Kubec J. Synchrotron Rad. (2014) 10.1107/s1600577514014556

[14]

Adaptable refractive correctors for x-ray optics

David Laundy, Vishal Dhamgaye, Thomas Moxham et al.

Optica 2019 10.1364/optica.6.001484

[15]

Lengeler J. Synchrotron Rad. (1999) 10.1107/s0909049599009747

[16]

Liu J. Synchrotron Rad. (2014) 10.1107/s1600577514011928

[17]

Loetgering Sci. Adv. (2020) 10.1126/sciadv.aax8836

[18]

Lyubomirskiy J. Synchrotron Rad. (2019) 10.1107/s1600577519007082

[19]

Lyubomirskiy Opt. Express (2019) 10.1364/oe.27.008639

[20]

Maiden Ultramicroscopy (2009) 10.1016/j.ultramic.2009.05.012

[21]

Matsuyama Sci. Rep. (2018) 10.1038/s41598-018-35611-0

[22]

Medvedskaya Opt. Express (2020) 10.1364/oe.384647

[23]

Mimura Nat. Phys. (2010) 10.1038/nphys1457

[24]

Morgan Sci. Rep. (2015) 10.1038/srep09892

[25]

Focusing hard x rays beyond the critical angle of total reflection by adiabatically focusing lenses

Jens Patommel, Susanne Klare, Robert Hoppe et al.

Applied Physics Letters 2017 10.1063/1.4977882

[26]

Pennicard J. Phys. Conf. Ser. (2013) 10.1088/1742-6596/425/6/062010

[27]

Petrov Opt. Express (2017) 10.1364/oe.25.014173

[28]

Plackett J. Instrum. (2013) 10.1088/1748-0221/8/01/c01038

[29]

Raimondi Synchrotron Radiat. News (2016) 10.1080/08940886.2016.1244462

[30]

Rau Phys. Status Solidi A (2011) 10.1002/pssa.201184272

[31]

Sawhney Appl. Phys. Lett. (2016) 10.1063/1.4960593

[32]

Schroer J. Synchrotron Rad. (2018) 10.1107/s1600577518008858

[33]

Schroer J. Synchrotron Rad. (2014) 10.1107/s1600577514016269

[34]

Schropp Appl. Phys. Lett. (2010) 10.1063/1.3332591

[35]

Schropp Proc. SPIE (2019)

[36]

Schropp, A., Brückner, D., Bulda, J., Falkenberg, G., Garrevoet, J., Seiboth, F., Wittwer, F., Koch, F., David, C., Schroer, C. G. (2018). Microsc. Microanal. 24(Suppl. 2), 186-187.

[37]

Schropp Sci. Rep. (2013) 10.1038/srep01633

[38]

Seaberg J. Synchrotron Rad. (2019) 10.1107/s1600577519005721

[39]

Seiboth Opt. Lett. (2019) 10.1364/ol.44.004622

[40]

Seiboth Appl. Phys. Lett. (2014) 10.1063/1.4896914

[41]

Seiboth J. Phys. Conf. Ser. (2014) 10.1088/1742-6596/499/1/012004

[42]

Perfect X-ray focusing via fitting corrective glasses to aberrated optics

Frank Seiboth, Andreas Schropp, Maria Scholz et al.

Nature Communications 2017 10.1038/ncomms14623

[43]

Seiboth J. Synchrotron Rad. (2018) 10.1107/s1600577517015272

[44]

Streun J. Synchrotron Rad. (2018) 10.1107/s1600577518002722

[45]

Tavares J. Synchrotron Rad. (2018) 10.1107/s1600577518008111

[46]

Terentyev J. Synchrotron Rad. (2017) 10.1107/s1600577516017331

[47]

Thibault Science (2008) 10.1126/science.1158573

[48]

Uhlén Opt. Express (2013) 10.1364/oe.21.008051

[49]

Uhlén Microelectron. Eng. (2014) 10.1016/j.mee.2013.10.011

[50]

Vila-Comamala Opt. Express (2011) 10.1364/oe.19.021333

Showing 50 of 51 references

Metrics

24

Citations

51

References

Details

Published: Jul 30, 2020
Vol/Issue: 27(5)
Pages: 1121-1130
License: View

Authors

F

Frank Seiboth

Deutsches Elektronen-Synchrotron (DESY) 3 , Notkestr. 85, 22607 Hamburg, Germany; SLAC National Accelerator Laboratory 4 Linac Coherent Light Source, , 2575 Sand Hill Road, Menlo Park, California 94025, USA

Technische Universität Dresden 1 Institute of Structural Physics, , 01062 Dresden, Germany

Institute of Applied Physics, Abbe Center of Photonics Friedrich Schiller University Jena 07745 Jena Germany; Fraunhofer Institute for Applied Optics and Precision Engineering IOF Center of Excellence in Photonics 07745 Jena Germany

MiTAC, University of Antwerp, Universiteitsplein 1, B-2610 Wilrijk, Belgium, Institute of Mineralogy and Geochemistry, University of Cologne, D-50674, Germany, Hamburger Synchrotronstrahlungslabor at Deutsches Elektronen-Synchrotron, DESY, D-22607 Hamburg, Germany, Geo-ForschungZentrum Potsdam, Division 4.1, Potsdam, Germany, ID22 ESRF, BP 220-F-38043, Grenoble Cedex, France, and Institute of Geosciences, University of Mainz, D-55099 Mainz, Germany

C

Christian G. Schroer

Deutsches Elektronen-Synchrotron (DESY) 3 , Notkestr. 85, 22607 Hamburg, Germany; Universität Hamburg 5 Department Physik, , Luruper Chaussee 149, 22761 Hamburg, Germany

Funding

Volkswagen Foundation

Cite This Article

Frank Seiboth, Dennis Brückner, Maik Kahnt, et al. (2020). Hard X-ray wavefront correction via refractive phase plates made by additive and subtractive fabrication techniques. Journal of Synchrotron Radiation, 27(5), 1121-1130. https://doi.org/10.1107/s1600577520007900

Hard X-ray wavefront correction via refractive phase plates made by additive and subtractive fabrication techniques

You May Also Like