journal article Open Access Feb 23, 2021

An integrated multi-energy flow calculation method for electricity-gas-thermal integrated energy systems

View at Publisher Save 10.1186/s41601-021-00182-2
Abstract
AbstractThe modeling and multi-energy flow calculation of an integrated energy system (IES) are the bases of its operation and planning. This paper establishes the models of various energy sub-systems and the coupling equipment for an electricity-gas-thermal IES, and an integrated multi-energy flow calculation model of the IES is constructed. A simplified calculation method for the compressor model in a natural gas network, one which is not included in a loop and works in constant compression ratio mode, is also proposed based on the concept of model reduction. In addition, a numerical conversion method for dealing with the conflict between nominal value and per unit value in the multi-energy flow calculation of IES is described. A case study is given to verify the correctness and speed of the proposed method, and the electricity-gas-thermal coupling interaction characteristics among sub-systems are studied.
Topics

No keywords indexed for this article. Browse by subject →

References
27
[1]
Li, J., Huang, Y., & Zhang, P. (2018). Review of multi-energy flow calculation model and method in integrated energy system. Electric Power Construction, 39(3), 1–11. https://doi.org/10.3969/j.issn.1000-7229.2018.03.001. 10.3969/j.issn.1000-7229.2018.03.001
[2]
Meng, B., Guo, F., Hu, L., Bai, X., & Liu, C. (2019). Wind abandonment analysis of multi-energy systems considering gas-electrical coupling. Electric Power Engineering Technology, 38(6), 2–8. https://doi.org/10.12158/j.2096-3203.2019.06.001. 10.12158/j.2096-3203.2019.06.001
[3]
Dai, X., Han, X., Dong, Y., Luo, H., & Li, Y. (2019). Multi-source and multi-level coordination optimization method of energy internet. Electric Power Engineering Technology, 38(2), 1–9. https://doi.org/10.19464/j.cnki.cn32-1541/tm.2019.02.001. 10.19464/j.cnki.cn32-1541/tm.2019.02.001
[4]
Chen, L., Wu, J., Tang, H., Xiong, Y., & Li, C. (2019). Optimal allocation model of the micro-energy grid with CCHP considering renewable energy consumption. Electric Power Engineering Technology, 38(5), 121–129. https://doi.org/10.12158/j.2096-3203.2019.05.018. 10.12158/j.2096-3203.2019.05.018
[5]
Zhong, J., Li, Y., Zeng, Z., & Cao, Y. (2019). Quasi-steady-state analysis and calculation of multi-energy flow for integrated energy system. Electric Power Automation Equipment, 39(08), 22–30. https://doi.org/10.16081/j.epae.201908010. 10.16081/j.epae.201908010
[6]
Chen, B., Sun, H., Wu, W., Guo, Q., & Qiao, Z. (2020). Energy circuit theory of integrated energy system analysis (III): Steady and dynamic energy flow calculation. Proceedings of the Chinese Society of Electrical Engineering, 40(15), 4820–4831. https://doi.org/10.13334/j.0258-8013.pcsee.200647. 10.13334/j.0258-8013.pcsee.200647
[7]
Gomezexposito, A., Canizares, C., & Conejo, A. J. (2008). Electric energy systems. Crc Press.
[8]
Gandomkar, M., Mirsaeidi, S., & Miveh, M. (2012). Distribution system modeling and analysis. Tehran: Gheddis Press.
[9]
Tang, K., Dong, S., & Song, Y. (2020). Successive-intersection-approximation-based power flow method for integrated transmission and distribution networks. IEEE Transactions on Power Apparatus and Systems, 35(6), 4836–4846. https://doi.org/10.1109/TPWRS.2020.2994312. 10.1109/tpwrs.2020.2994312
[10]
Tang, K., Dong, S., Shen, J., & Song, Y. (2019). A robust and efficient two-stage algorithm for power flow calculation of large-scale systems. IEEE Transactions on Power Systems, 34(6), 5012–5022. https://doi.org/10.1109/TPWRS.2019.2914431. 10.1109/tpwrs.2019.2914431
[11]
Jiang, M., Wang, S., & Zeng, Z. (1995). Simulation and analysis of gas transmission and distribution network. Beijing: Petroleum Industry Press.
[12]
Yu, D. (2019). Modeling and analysis optimal energy flow in combined heating and electrical multi-energy system considering the linear network constraints. North China Electric Power University (in Beijing). https://kns.cnki.net/KCMS/detail/detail.aspx?dbname=CMFD202001&filename=1019240086.nh.
[13]
Yuan, Z., Zhao, Y., Guo, Z., et al. (2019). Research summary of integrated energy systems planning for energy internet. Southern Power System Technology, 13(7), 1–9. https://doi.org/10.13648/j.cnki.issn1674-0629.2019.07.001. 10.13648/j.cnki.issn1674-0629.2019.07.001
[14]
Guo, Z., Lei, J., Ma, X., Yuan, Z., Dong, B., & Yu, H. (2019). Modeling and calculation methods for multi-energy flows in large-scale integrated energy system containing electricity, gas, and heat. Proceedings of the CSU-EPSA, 31(10), 96–102. https://doi.org/10.19635/j.cnki.csu-epsa.000283. 10.19635/j.cnki.csu-epsa.000283
[15]
Li, Q., An, S., & Gedra, T. W. (2003). Solving natural gas load flow problems using electric load flow techniques. In Proceedings of the North American Power Symposium.
[16]
Xie, H., & Hu, L. (2017). Power flow calculation of combined heat and electricity system. Distribution & Utilization, 34(12), 21–26. https://doi.org/10.19421/j.cnki.1006-6357.2017.12.004. 10.19421/j.cnki.1006-6357.2017.12.004
[17]
Liu, X. (2013). Combined analysis of electricity and heat networks. Cardiff: Cardiff University.
[18]
Liu, X., Wu, J., Jekins, N., & Bagdanavicius, A. (2016). Combined analysis of electricity and heat networks. Applied Energy, 162, 1238–1250. https://doi.org/10.1016/j.apenergy.2015.01.102. 10.1016/j.apenergy.2015.01.102
[19]
Wang, Y., Zeng, B., Guo, Z., & Zhang, J. (2016). Multi-energy flow calculation method for integrated energy system containing electricity, heat and gas. Power System Technology, 40(10), 2942–2950. https://doi.org/10.13335/j.1000-3673.pst.2016.10.004. 10.13335/j.1000-3673.pst.2016.10.004
[20]
Zhao, X., Yang, L., Qu, X., & Yan, W. (2018). An improved energy flow calculation method for integrated electricity and natural gas system. Transactions of China Electrotechnical Society, 33(3), 467–477. https://doi.org/10.19595/j.cnki.1000-6753.tces.161923. 10.19595/j.cnki.1000-6753.tces.161923
[21]
Yu, X., & Zhao, J. (2018). Heat-gas-power flow calculation method for integrated energy system containing P2H and P2G. Electric Power Construction, 39(12), 13–21.
[22]
Shi, J., Wang, L., Wang, Y., & Zhang, J. (2017). Generalized energy flow analysis considering electricity gas and heat subsystems in local-area energy systems integration. Energies, 10(4), 514. https://doi.org/10.3390/en10040514. 10.3390/en10040514
[23]
Magdy, G., Mohamed, E., Shabib, G., Elbaset, A., & Mitani, Y. (2018). Microgrid dynamic security considering high penetration of renewable energy. Protection and Control of Modern Power Systems, 3(3), 236–246. https://doi.org/10.1186/s41601-018-0093-1. 10.1186/s41601-018-0093-1
[24]
Mohammed, A., Li, L., Jiang, L., & Tang, W. (2018). Residue theorem based soft sliding mode control for wind power generation systems. Protection and Control of Modern Power Systems, 3(3), 247–258. https://doi.org/10.1186/s41601-018-0097-x. 10.1186/s41601-018-0097-x
[25]
Wood, J. (2008). Combined heat and power. Local Energy: Distributed generation of heat and power. IET Digital Library.
[26]
Yan, J., Huang, J., & He, M. (2006). The technology of CCHP. Beijing: Chemical Industry Press.
[27]
Public Utility Regulatory Policies Act of 1978 (1982). Annual report to congress. United States.
Metrics
51
Citations
27
References
Details
Published
Feb 23, 2021
Vol/Issue
6(1)
License
View
Cite This Article
Mengting Zhu, Chengsi Xu, Shufeng Dong, et al. (2021). An integrated multi-energy flow calculation method for electricity-gas-thermal integrated energy systems. Protection and Control of Modern Power Systems, 6(1). https://doi.org/10.1186/s41601-021-00182-2