journal article Open Access Feb 19, 2025

Application of DFT and Experimental Tests for the Study of Compost Formation Between Chitosan-1,3-dichloroketone with Uses for the Removal of Heavy Metals in Wastewater

View at Publisher Save 10.3390/jcs9020091
Abstract
The environment presently contains greater amounts of heavy metals due to human activities, causing toxicity, mutagenicity, and carcinogenicity. This study evaluated a chitosan (CS) composite material combined with 1,3-dichlorocetone to extract heavy metals from affected waters, integrating experimental and computational analyses. The synthesis of chitosan, obtained from shrimp waste chitin, reached a yield of 85%. FTIR analysis confirmed key functional groups (NH2 and OH), and XRD showed high crystallinity with peaks at 2θ = 8° and 20°. The physicochemical properties evaluated included a moisture content of 7.3%, ash content of 2.4%, and a deacetylation degree of 73%, consistent with commercial standards. Chitosan exhibited significant solubility in 1.5% acetic acid, moderate solubility in water, and insolubility in NaOH, demonstrating its versatility for environmental applications. In adsorption tests, heavy metal concentrations were reduced by CS derivatives, with Cr and Pb dropping to 0.03 mg/L, and Cu and Zn to less than 0.05 mg/L. CS cross-linked with 1,3-dichlorocetone proved the most efficient, outperforming other derivatives such as glutaraldehyde and epichlorohydrin. Computational analysis evaluated key molecular interactions using DFT and the B3LYP/LANLD2Z method. The band gap energies (HOMO–LUMO) decreased to 0.09753 eV for Zn and 0.01485 eV for Pb, indicating high affinity, while Cd showed lower interaction (0.11076 eV). The total dipole moment increased remarkably for Zn (14.693 Debye) and Pb (7.449 Debye), in contrast to Cd (4.515 Debye). Other descriptors, such as chemical hardness (η), reflected a higher reactivity for Zn (0.04877 eV) and Pb (0.00743 eV), which favors adsorption. The correlation between experimental and computational results validates the efficiency and selectivity of CS/1,3-dichlorocetone for removing heavy metals, especially Pb and Zn. This material stands out for its adsorbent capacity, sustainability, and economic viability, positioning it as a promising solution for wastewater remediation.
Topics

No keywords indexed for this article. Browse by subject →

References
71
[1]
Suba "Novel Adsorbents for the Removal of Dyes and Metals from Aqueous Solution—A Review" J. Adv. Phys. (2016) 10.1166/jap.2016.1269
[2]
Igiri "Toxicity and Bioremediation of Heavy Metals Contaminated Ecosystem from Tannery Wastewater: A Review" J. Toxicol. (2018) 10.1155/2018/2568038
[3]
Achary "Concentration of heavy metals in the {food chain components of the nearshore coastal waters of Kalpakkam, southeast coast of India" Food Control (2017) 10.1016/j.foodcont.2016.04.028
[4]
Rezakazemi "Membrane filtration of wastewater from gas and oil production" Environ. Chem. Lett. (2017) 10.1007/s10311-017-0693-4
[5]
Yurtsever "Concentrate minimization and water recovery enhancement using pellet precipitator in a reverse osmosis process treating textile wastewater" J. Environ. Manag. (2018) 10.1016/j.jenvman.2018.05.057
[6]
Tao "Separation of cesium from wastewater with copper hexacyanoferrate film in an electrochemical system driven by microbial fuel cells" Bioresour. Technol. (2019) 10.1016/j.biortech.2019.01.093
[7]
Mostafa "Laser-assisted for preparation ZnO/CdO thin film prepared by pulsed laser deposition for catalytic degradation" Radiat. Phys. Chem. (2020) 10.1016/j.radphyschem.2020.109020
[8]
Mostafa "Synthesis of ZnO/CdO thin film for catalytic degradation of 4-nitrophenol" J. Mol. Struct. (2020) 10.1016/j.molstruc.2020.128872
[9]
Zakaria "Ultra-thin silver nanoparticles film prepared via pulsed laser deposition: Synthesis, characterization, and its catalytic activity on reduction of 4-nitrophenol" Surf. Interfaces (2020) 10.1016/j.surfin.2020.100438
[10]
Dotto "Performance of different coagulants in the coagulation/flocculation process of textile wastewater" J. Clean. Prod. (2019) 10.1016/j.jclepro.2018.10.112
[11]
Rae "Comparison of sustainable biosorbents and ion-exchange resins to remove Sr2+ from simulant nuclear wastewater: Batch, dynamic and mechanism studies" Sci. Total Environ. (2019) 10.1016/j.scitotenv.2018.09.396
[12]
Lashgari "Fiber-in-tube solid-phase microextraction of caffeine as a molecular tracer in wastewater by electrochemically deposited layered double hydroxide" J. Sep. Sci. (2018) 10.1002/jssc.201701539
[13]
Mostafa "WO3 quantum dot: Synthesis, characterization and catalytic activity" J. Mol. Struct. (2019) 10.1016/j.molstruc.2019.03.007
[14]
Alghool "An Eco-friendly Synthesis of V2O5 Nanoparticles and Their Catalytic Activity for the Degradation of 4-Nitrophrnol" J. Inorg. Organomet. Polym. Mater. (2019) 10.1007/s10904-019-01096-1
[15]
Yu "Ion-recognizable hydrogels for efficient removal of cesium ions from aqueous environment" J. Hazard. Mater. (2017) 10.1016/j.jhazmat.2016.10.024
[16]
Poshina "Accessibility of chitin and chitosan in enzymatic hydrolysis: A review" Polym. Degrad. Stab. (2018) 10.1016/j.polymdegradstab.2018.09.005
[17]
Zhang "Removal of heavy metal ions using chitosan and modified chitosan: A review" J. Mol. Liq. (2016) 10.1016/j.molliq.2015.12.013
[18]
Yuvaraja "Modification of chitosan macromolecule and its mechanism for the removal of Pb(II) ions from aqueous environment" Int. J. Biol. Macromol. (2019) 10.1016/j.ijbiomac.2019.06.016
[19]
Lee "Synthesis of chitosan-based polymeric surfactants and their adsorption properties for heavy metals and fatty acids" Int. J. Biol. Macromol. (2005) 10.1016/j.ijbiomac.2005.05.004
[20]
Abdullah "Solid matrices for fabrication of magnetic iron oxide nanocomposites: Synthesis, properties, and application for the adsorption of heavy metal ions and dyes" Compos. Part B Eng. (2019) 10.1016/j.compositesb.2018.12.075
[21]
Sutirman, Z.A., Sanagi, M.M., Karim, K.J.A., Naim, A.A., and Ibrahim, W.A.W. (2018). Chitosan-based adsorbents for the removal of metal ions from aqueous solutions. Malays. J. Anal. Sci., 22.
[22]
Tommalieh "Gold nanoparticles doped Polyvinyl Alcohol/Chitosan blend via laser ablation for electrical conductivity enhancement" J. Mol. Struct. (2020) 10.1016/j.molstruc.2020.128814
[23]
Viyapuri "Physical and chemical reinforcement of chitosan film using nanocrystalline cellulose and tannic acid" Cellulose (2015) 10.1007/s10570-015-0650-y
[24]
Singla "Chitosan: Some pharmaceutical and biological aspects-an update" J. Pharm. Pharmacol. (2001) 10.1211/0022357011776441
[25]
Prabaharan, M., and Sivashankari, P. (2015). Prospects of Bioactive Chitosan-Based Scaffolds in Tissue Engineering and Regenerative Medicine. Chitin and Chitosan for Regenerative Medicine, Springer. 10.1007/978-81-322-2511-9_2
[26]
Xiao "Synthesis of core–shell bioaffinity chitosan–TiO2 composite and its environmental applications" J. Hazard. Mater. (2015) 10.1016/j.jhazmat.2014.10.047
[27]
Gang "As(III) removal using an iron-impregnated chitosan sorbent" J. Hazard. Mater. (2010) 10.1016/j.jhazmat.2010.06.008
[28]
Wang "Preparation and evaluation of magnetic nanoparticles impregnated chitosan beads for arsenic removal from water" Chem. Eng. J. (2014) 10.1016/j.cej.2014.04.061
[29]
Liu "Removal of Pb(II) from aqueous solution using dithiocarbamate modified chitosan beads with Pb(II) as imprinted ions" Chem. Eng. J. (2013) 10.1016/j.cej.2013.01.071
[30]
Zhu "Competitive adsorption of Pb(II), Cu(II) and Zn(II) onto xanthate-modified magnetic chitosan" J. Hazard. Mater. (2012) 10.1016/j.jhazmat.2012.04.026
[31]
Ngah "Comparative study on adsorption and desorption of Cu(II) ions by three types of chitosan–zeolite composites" Chem. Eng. J. (2013) 10.1016/j.cej.2013.02.090
[32]
Negm "Treatment of industrial wastewater containing copper and cobalt ions using modified chitosan" J. Ind. Eng. Chem. (2015) 10.1016/j.jiec.2014.03.015
[33]
Monier "Preparation of cross-linked magnetic chitosan-phenylthiourea resin for adsorption of Hg(II), Cd(II) and Zn(II) ions from aqueous solutions" J. Hazard. Mater. (2012) 10.1016/j.jhazmat.2012.01.015
[34]
Kyzas "Poly(itaconic acid)-Grafted Chitosan Adsorbents with Different Cross-Linking for Pb(II) and Cd(II) Uptake" Langmuir (2014) 10.1021/la402778x
[35]
Tirtom "Comparative adsorption of Ni(II) and Cd(II) ions on epichlorohydrin crosslinked chitosan–clay composite beads in aqueous solution" Chem. Eng. J. (2012) 10.1016/j.cej.2012.05.059
[36]
Aliabadi "Electrospun nanofiber membrane of PEO/Chitosan for the adsorption of nickel, cadmium, lead and copper ions from aqueous solution" Chem. Eng. J. (2013) 10.1016/j.cej.2013.01.021
[37]
Vieira "Design of apolar chitosan-type adsorbent for removal of Cu(II) and Pb(II): An experimental and DFT viewpoint of the complexation process" J. Environ. Chem. Eng. (2019) 10.1016/j.jece.2019.103070
[38]
Ezzat "DFT: B3LYP/ LANL2DZ Study for the Removal of Fe, Ni, Cu, As, Cd and Pb with Chitosan" Biointerface Res. Appl. Chem. (2020) 10.33263/briac106.70027010
[39]
Menazea "Chitosan/graphene oxide composite as an effective removal of Ni, Cu, As, Cd and Pb from wastewater" Comput. Theor. Chem. (2020) 10.1016/j.comptc.2020.112980
[40]
Mardani "New Schiff-Base’s Modified Chitosan: Synthesis, Characterization, Computational, Thermal Study and Comparison on Adsorption of Copper(II) and Nickel(II) Metal Ions in Aqueous" J. Polym. Environ. (2020) 10.1007/s10924-020-01788-7
[41]
Frisch, M.J. (2018). Revisión B. 01, Gaussiano. Inc.
[42]
Giroday "Thermodynamic stability of PFOS: M06-2X and B3LYP comparison" Comput. Theor. Chem. (2014) 10.1016/j.comptc.2014.08.003
[43]
Results obtained with the correlation energy density functionals of becke and Lee, Yang and Parr

Burkhard Miehlich, Andreas Savin, Hermann Stoll et al.

Chemical Physics Letters 1989 10.1016/0009-2614(89)87234-3
[44]
Alabaraoye "Biopolymer (Chitin) from Various Marine Seashell Wastes: Isolation and Characterization" J. Polym. Environ. (2017) 10.1007/s10924-017-1118-y
[45]
Horwitz, W. (1990). Official methods of analysis of the Association of Official Analytical Chemists, Association of Official Agricultural Chemists, Inc.. Available online: https://law.resource.org/pub/us/cfr/ibr/002/aoac.methods.1.1990.pdf.
[46]
Black, C.A., Evans, D.D., Ensminger, L., White, J., and Clark, F. (1965). Methods of Soil Analysis. Part 1. Physical and Mineralogical Properties, Including Statistics of Measurement and Sampling, American Society of Agronomy (ASA). Inc. Publisher. 10.2134/agronmonogr9.1
[47]
Jiao "Synthesis and characterization of chitosan-based schiff base compounds with aromatic substituent groups" Iran. Polym. J. (2011)
[48]
Atangana "Modification of Novel Chitosan-Starch Cross-Linked Derivatives Polymers: Synthesis and Characterization" J. Polym. Environ. (2019) 10.1007/s10924-019-01407-0
[49]
Petry "Análisis conformacional del ácido tánico: Efectos del entorno en las propiedades electrónicas y de reactividad" J. Chem. Phys. (2021) 10.1063/5.0045968
[50]
Vijayaraj "Comparison of Global Reactivity Descriptors Calculated Using Various Density Functionals: A QSAR Perspective" J. Chem. Theory Comput. (2009) 10.1021/ct900347f

Showing 50 of 71 references