journal article Open Access Sep 14, 2017

Bonding Behavior of Deformed Steel Rebars in Sustainable Concrete Containing both Fine and Coarse Recycled Aggregates

Materials Vol. 10 No. 9 pp. 1082 · MDPI AG
View at Publisher Save 10.3390/ma10091082
Abstract
In order to assess the bond behavior of deformed steel rebars in recycled-aggregate concrete (RAC) incorporating both fine and coarse recycled aggregate, pull-out tests were carried out in this study on 16-mm diameter deformed steel rebars embedded concentrically in RAC. The concrete was designed using equivalently mixed proportions of both recycled coarse aggregate and recycled fine aggregate. The tests employed five types of recycled aggregate replacement combinations and three types of rebar placement orientation (i.e., vertical bars and two-tiered and three-tiered horizontal bars). Based on the pull-out test results, the maximum bond strength tended to decrease and the slip at the maximum bond strength increased as the average water absorption of the aggregate increased, irrespective of the rebar orientation or placement location within the concrete member. The pull-out test results for the horizontal steel rebars embedded in RAC indicate that the casting position effect could be determined from the mid-depth of the concrete member, irrespective of the member’s height. The normalized bond versus slip relationship between the deformed rebar and the RAC could be predicted using an empirical model based on regression analysis of the experimental data.
Topics

No keywords indexed for this article. Browse by subject →

References
40
[1]
Ministry of Government Legislation (2017, August 17). A Law on Recycling for Construction Waste, Available online: http://www.moleg.go.kr.
[2]
Ministry of Environment (2017, August 17). Statics on Waste Occurrence and Disposal, Available online: http://www.me.go.kr.
[3]
Ministry of Land, Infrastructure and Transport (2017, August 17). Recycled Aggregate Quality Standard, Available online: http://www.molit.go.kr.
[4]
Oikonomou "Recycled concrete aggregates" Cem. Concr. Compos. (2005) 10.1016/j.cemconcomp.2004.02.020
[5]
Zhou "Mechanical properties of recycled concrete made with different types of coarse aggregate" Constr. Build. Mater. (2017) 10.1016/j.conbuildmat.2016.12.163
[6]
Rahal "Mechanical properties of concrete with recycled coarse aggregate" Build. Environ. (2007) 10.1016/j.buildenv.2005.07.033
[7]
Tam "Properties of concrete made with crushed concrete as coarse aggregate" Mag. Concr. Res. (1985) 10.1680/macr.1985.37.130.29
[8]
Performance evaluation of structural concrete using controlled quality coarse and fine recycled concrete aggregate

Abdurrahmaan Lotfy, Mahmoud Al-Fayez

Cement and Concrete Composites 2015 10.1016/j.cemconcomp.2015.02.009
[9]
Fan "The effects of different fine recycled concrete aggregates on the properties of mortar" Materials (2015) 10.3390/ma8052658
[10]
Pereira "The effect of superplasticizers on the mechanical performance of concrete made with fine recycled concrete aggregates" Cem. Concr. Compos. (2012) 10.1016/j.cemconcomp.2012.06.009
[11]
Evangelista "Physical, chemical and mineralogical properties of fine recycled aggregates made from concrete waste" Constr. Build. Mater. (2015) 10.1016/j.conbuildmat.2015.03.112
[12]
Evangelista "Mechanical behaviour of concrete made with fine recycled concrete aggregates" Cem. Concr. Compos. (2007) 10.1016/j.cemconcomp.2006.12.004
[13]
Khoshkenari "The role of 0–2 mm fine recycled concrete aggregate on the compressive and splitting tensile strengths of recycled concrete aggregate concrete" Mater. Des. (2014) 10.1016/j.matdes.2014.07.048
[14]
Ajdukiewicz "Influence of recycled aggregates on mechanical properties of HS/HPC" Cem. Concr. Compos. (2002) 10.1016/s0958-9465(01)00012-9
[15]
Baena, M., Torres, L., Turaon, A., Barris, C., and Mias, C. (2009, January 13–15). Experimental study on the bond behaviour between recycled aggregate concrete and fibre reinforced polymer bars. Proceedings of the Ninth International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, Sydney, Australia.
[16]
Breccolotti "Structural reliability of bonding between steel rebars and recycled aggregate concrete" Constr. Build. Mater. (2013) 10.1016/j.conbuildmat.2013.05.017
[17]
Guerra "Anchorage of steel rebars to recycled aggregates concrete" Constr. Build. Mater. (2014) 10.1016/j.conbuildmat.2014.08.081
[18]
Hassanean "Influence of size and replacement ratio of recycled concrete aggregate on concrete properties" J. Eng. Sci. (2013)
[19]
Jau, W.C., Fu, C.W., and Yang, C.T. (2004, January 20–21). Study of feasibility and mechanical properties for producing high-flowing concrete with recycled coarse aggregates. Proceedings of the International Workshop on Sustainable Development and Concrete Technology, Beijing, China.
[20]
Prince "Bond behaviour of deformed steel bars embedded in recycled aggregate concrete" Constr. Build. Mater. (2013) 10.1016/j.conbuildmat.2013.08.031
[21]
Kim "Mechanical properties of recycled aggregate concrete with deformed steel re-bar" J. Mar. Sci. Technol. (2012) 10.51400/2709-6998.1804
[22]
Herrador "Bond behavior between steel reinforcement and recycled concrete" Mater. Struct. (2014) 10.1617/s11527-013-0063-z
[23]
Kim "Influence of recycled coarse aggregates on the bond behavior of deformed bars in concrete" Eng. Struct. (2013) 10.1016/j.engstruct.2012.10.009
[24]
Zhao "Bond behaviour of normal/recycled concrete and corroded steel bars" Constr. Build. Mater. (2013) 10.1016/j.conbuildmat.2013.06.091
[25]
Huang "Experimental study on bond-slip between steel bar and recycled aggregate concrete" Adv. Mater. Res. (2011) 10.4028/www.scientific.net/amr.250-253.1651
[26]
Singla, S. (2013). Compressive Strength and Bond Behaviour of Recycled Coarse Aggregate Concrete. [Ph.D. Thesis, Thapar University].
[27]
Steele, A.R. (2014). Bond Performance of Recycled Aggregate Concrete. [Master’s Thesis, Missouri University of Science and Technology].
[28]
Xiao "Bond behaviour between recycled aggregate concrete and steel rebars" Constr. Build. Mater. (2007) 10.1016/j.conbuildmat.2005.08.008
[29]
Kim "Evaluation of the bond behavior of steel reinforcing bars in recycled fine aggregate concrete" Cem. Concr. Compos. (2014) 10.1016/j.cemconcomp.2013.10.013
[30]
Corinaldesi "Influence of mineral additions on the performance of 100% recycled aggregate concrete" Constr. Build. Mater. (2009) 10.1016/j.conbuildmat.2009.02.004
[31]
Orangun "A reevaluation of test data on development length and splices" ACI J. (1977)
[32]
Darwin "Development length criteria: Bars not confined by transverse reinforcement" ACI Struct. J. (1992)
[33]
Comité Euro-International du Béton, and the Fédération Internationale de la Précontrainte (1993). CEB-FIP Model Code 1990, Thomas Telford.
[34]
ACI Committee 318 (2014). Building Code for Structural Concrete (318R–2014) and Commentary (318R–2014), American Concrete Institute.
[35]
Canadian Standards Association (CSA) (2004). Design of Concrete Structures, Canadian Standards Association. CSA CAN3-A23.3.
[36]
Korea Agency for Technology and Standards (2017, August 17). Korean Industrial Standards. Available online: http://www.kssn.net/english.
[37]
Bamonte "High-bond bars in NSC and HPC: Study on size effect and on the local bond stress-slip law" J. Struct. Eng. (2007) 10.1061/(asce)0733-9445(2007)133:2(225)
[38]
ASTM C234-91a (1991). Standard Test Method for Comparing Concrete on the Basis of the Bond Developed with Reinforcing Steel, ASTM International.
[39]
Haraji "Development/splice strength of reinforcing bars embedded in plain and fiber reinforced concrete" ACI Struct. J. (1994)
[40]
Guo, Z. (1997). Strength and Deformation of Concrete—Experimental Foundation and Constitutive Relationship, Press of Tsinghua University.
Related

You May Also Like

Zinc Oxide—From Synthesis to Application: A Review

Agnieszka Kołodziejczak-Radzimska, Teofil Jesionowski · 2014

2,108 citations

Biodegradable Polymers

Isabelle Vroman, Lan Tighzert · 2009

1,211 citations

Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering

Lutz-Christian Gerhardt, Aldo R. Boccaccini · 2010

1,032 citations

Fabrication and Properties of Carbon Fibers

Xiaosong Huang · 2009

821 citations

Self-Healing in Cementitious Materials—A Review

Kim Van Tittelboom, Nele De Belie · 2013

807 citations