The influence of blast furnace slag content on the mechanical and durability properties of raw perlite-based geopolymer mortars

Serhat Çeli̇kten

doi:10.36909/jer.11225

journal article Open Access Jun 01, 2022

The influence of blast furnace slag content on the mechanical and durability properties of raw perlite-based geopolymer mortars

Serhat Çeli̇kten

Journal of Engineering Research Vol. 10 No. 2 pp. 112-123 · Elsevier BV

View at Publisher Save 10.36909/jer.11225

Topics

No keywords indexed for this article. Browse by subject →

References

32

[1]

ASTM C 597 (2016)

[2]

ASTM C 642–06 (2006)

[3]

Atabey "Investigation of Usability of Ceramic Sanitary ware Wastes in Geopolymer Mortar Production" International Journal of Engineering Research and Development. (2021)

[4]

Aydın "A ternary optimisation of mineral additives of alkali activated cement mortars" Construction and Building Materials. (2013) 10.1016/j.conbuildmat.2013.02.005

[5]

Sodium silicate-based, alkali-activated slag mortars

A.R Brough, A Atkinson

Cement and Concrete Research 2002 10.1016/s0008-8846(02)00717-2

[6]

Celikten "Strength development of ground perlite-based geopolymer mortars" Advances in Concrete Construction. (2020)

[7]

Çelikten "Properties of geopolymer mortars derived from ground calcined perlite and NaOH solution" European Journal of Environmental and Civil Engineering (2021)

[8]

Çelikten "Mechanical and microstructural properties of alkali- activated slag and slag+ fly ash mortars exposed to high temperature" Construction and Building Materials. (2019) 10.1016/j.conbuildmat.2019.05.055

[9]

Cho "Effect of Na2O content, SiO2/Na2O molar ratio, and curing conditions on the compressive strength of FA-based geopolymer" Construction and Building Materials. (2017) 10.1016/j.conbuildmat.2017.04.004

[10]

de Oliveira "Evaluation of expanded perlite behavior in PS/Perlite composites" Applied Clay Science. (2019) 10.1016/j.clay.2019.105223

[11]

El Hafid "Influence of NaOH concentration on microstructure and properties of cured alkali-activated calcined clay" Journal of Building Engineering. (2017) 10.1016/j.jobe.2017.04.012

[12]

EN 196-1 "Methods of Testing Cement–Part 1: Determination of Strength" European Committee for Standardization (CEN) (2016)

[13]

Erdogan "Properties of ground perlite geopolymer mortars" Journal of Materials in Civil Engineering. (2015) 10.1061/(asce)mt.1943-5533.0001172

[14]

Gao "Evaluation of hybrid steel fiber reinforcement in high performance geopolymer composites" Materials and Structures. (2017) 10.1617/s11527-017-1030-x

[15]

Kaya "The effect of silica fume and micro SiO2 additive on the strength properties in kaolin based geopolymer mortars. Niğde Ömer Halisdemir University Journal of" Engineering Sciences (2021)

[16]

Lafhaj "Experimental study on sound and damaged mortar: Variation of ultrasonic parameters with porosity" Construction and Building Materials. (2009) 10.1016/j.conbuildmat.2008.05.012

[17]

A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements

Chao Li, Henghu Sun, Longtu Li

Cement and Concrete Research 2010 10.1016/j.cemconres.2010.03.020

[18]

Galiano "Contributions to the study of porosity in fly ash-based geopolymers. Relationship between degree of reaction, porosity and compressive strength" Materiales de Construccion. (2016)

[19]

Mendes "Correlation Between Ultrasonic Pulse Velocity and Thermal Conductivity of Cement-Based Composites" Journal of Nondestructive Evaluation. (2020) 10.1007/s10921-020-00680-7

[20]

Part "An overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products" Construction and Building Materials. (2015) 10.1016/j.conbuildmat.2014.12.065

[21]

Praveen Kumar "Influence of metakaolin on strength and durability characteristics of ground granulated blast furnace slag based geopolymer concrete" Structural Concrete. (2019)

[22]

Provis "X-ray microtomography shows pore structure and tortuosity in alkali-activated binders" Cement and Concrete Research. (2012) 10.1016/j.cemconres.2012.03.004

[23]

Ranjbar "Mechanisms of interfacial bond in steel and polypropylene fiber reinforced geopolymer composites" Composites Science and Technology. (2016) 10.1016/j.compscitech.2015.11.009

[24]

Sarıdemir "Investigation of fire and chemical effects on the properties of alkali- activated lightweight concretes produced with basaltic pumice aggregate" Construction and Building Materials. (2020) 10.1016/j.conbuildmat.2020.119969

[25]

Sun "Application of response surface methodology in the optimization of fly ash geopolymer concrete" Revista Romana de Materiale. (2018)

[26]

Taxiarchou "Study on the suitability of volcanic amorphous aluminosilicate rocks (perlite) for the synthesis of Geopolymer-based concrete" (2013)

[27]

Temuujin "Characterization of various fly ashes for preparation of geopolymers with advanced applications" Advanced Powder Technology. (2013) 10.1016/j.apt.2013.01.013

[28]

Thaarrini "Properties of foundry sand, ground granulated blast furnace slag and bottom ash based geopolymers under ambient conditions" Periodica Polytechnica Civil Engineering. (2016) 10.3311/ppci.8014

[29]

Improving compressive strength of fly ash-based geopolymer composites by basalt fibers addition

Patthamaporn Timakul, Weerada Rattanaprasit, Pavadee Aungkavattana

Ceramics International 2016 10.1016/j.ceramint.2016.01.014

[30]

TS EN 1015-11 (2000)

[31]

Yurt "The Effects of Curing Condition on Geopolymers Incorporating Zeolit" Academic Platform Journal of Engineering and Science. (2020)

[32]

Yusuf "Strength and microstructure of alkali-activated binary blended binder containing palm oil fuel ash and ground blast-furnace slag" Construction and Building Materials. (2014) 10.1016/j.conbuildmat.2013.11.012

Metrics

14

Citations

32

References

Details

Published: Jun 01, 2022
Vol/Issue: 10(2)
Pages: 112-123
License: View

Authors

S

Serhat Çeli̇kten

Cite This Article

Serhat Çeli̇kten (2022). The influence of blast furnace slag content on the mechanical and durability properties of raw perlite-based geopolymer mortars. Journal of Engineering Research, 10(2), 112-123. https://doi.org/10.36909/jer.11225

The influence of blast furnace slag content on the mechanical and durability properties of raw perlite-based geopolymer mortars

You May Also Like