The impact of energy density and process parameters on the distribution of residual stresses in additively manufactured stainless steel 316 L

R. Haribaskar; T. Sampath kumar

doi:10.1007/s00339-024-07638-w

journal article Jun 18, 2024

The impact of energy density and process parameters on the distribution of residual stresses in additively manufactured stainless steel 316 L

R. Haribaskar

T. Sampath kumar

Applied Physics A Vol. 130 No. 7 · Springer Science and Business Media LLC

View at Publisher Save 10.1007/s00339-024-07638-w

Topics

No keywords indexed for this article. Browse by subject →

References

59

[1]

Metal Additive Manufacturing: A Review

William E. Frazier

Journal of Materials Engineering and Performance 2014 10.1007/s11665-014-0958-z

[2]

S.L. Sing, W.Y. Yeong, Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments. Virtual Phys. Prototyp. 15(3), 359–370 (2020) 10.1080/17452759.2020.1779999

[3]

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges

W. E. King, A. T. ANDERSON, R. M. Ferencz et al.

Applied Physics Reviews 2015 10.1063/1.4937809

[4]

S.A. Khairallah, A.T. Anderson, A.M. Rubenchik, W.E. King, Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Addit. Manuf. Handb. Prod. Dev. Def. Ind. 108, 613–628 (2017)

[5]

V.P. Kumar, A.V. Jebaraj, Attainment of favorable microstructure for residual stress reduction through high-temperature heat treatment on additive manufactured inconel 718 alloy. Int J Adv Manuf Technol. 2022;121(7–8):4455–72. https://doi.org/10.1007/s00170-022-09640-z 10.1007/s00170-022-09640-z

[6]

P. Mercelis, J.P. Kruth, Residual stresses in Selective Laser Sintering and Selective Laser Melting. 16th Solid Free Fabr Symp SFF. 2005;2005;109–31

[7]

M. Kumaran, V. Senthilkumar, C.T. Justus Panicker, R. Shishir, Investigating the residual stress in additive manufacturing of combined process in powder bed fusion and directed energy deposition. Mater Today Proc. 2021;47:4387–90. https://doi.org/10.1016/j.matpr.2021.05.200 10.1016/j.matpr.2021.05.200

[8]

V.P. Kumar, A.V. Jebaraj, Comprehensive review on residual stress control strategies in laser-based powder bed fusion process– challenges and opportunities. Lasers Manuf. Mater. Process. 2023 10.1007/s40516-023-00217-6

[9]

R. Haribaskar, Sampath Kumar. Defects in Metal Additive Manufacturing: formation, process parameters, Postprocessing, challenges, Economic aspects, and future research directions. D Print. Addit. Manuf. 3(00), 5–7 (2023)

[10]

R. Haribaskar, T.S. Kumar, N. Tamiloli, Surface Integrity of additively manufactured Inconel-718 by peening approaches. Mater Manuf Process. 2023;38(8):1009–19. https://doi.org/10.1080/10426914.2022.2146716 10.1080/10426914.2022.2146716

[11]

O.O. Ojo, E. Taban, Post-processing treatments–microstructure–performance interrelationship of metal additive manufactured aerospace alloys: a review. Mater Sci Technol (United Kingdom). 2023;39(1):1–41. https://doi.org/10.1080/02670836.2022.2130530 10.1080/02670836.2022.2130530

[12]

I.S. Grech, J.H. Sullivan, R.J. Lancaster, J. Plummer, N.P. Lavery, The optimisation of hot isostatic pressing treatments for enhanced mechanical and corrosion performance of stainless steel 316L produced by laser powder bed fusion. Addit. Manuf. 58, 103072 (2022)

[13]

H. Irrinki, S.D. Nath, A.A. Akilan, S.V. Atre, Laser Powder Bed Fusion Addit. Manuf. Process. 2020;209–219 10.31399/asm.hb.v24.a0006621

[14]

P. Pant, F. Salvemini, S. Proper, V. Luzin, K. Simonsson, S. Sjöström, S. Hosseini, R.L. Peng, J. Moverare, A study of the influence of novel scan strategies on residual stress and microstructure of L-shaped LPBF IN718 samples. Mater Des. 2022;214:110386. https://doi.org/10.1016/j.matdes.2022.110386 10.1016/j.matdes.2022.110386

[15]

R.M. Mahamood, E.T. Akinlabi, M. Shukla, S. Pityana, Characterizing the effect of processing parameters on the porosity of laser deposited titanium alloy powder. In: Lecture Notes in Engineering and Computer Science. 2014

[16]

F. Marin, de A.F. Souza, A. Mikowski, L.H.G. Fontanella, P. Soares, de L.N.L. Lacalle, Energy Density Effect on the Interface Zone in Parts manufactured by laser powder Bed Fusion on Machined bases. Int. J. Precis Eng. Manuf. - Green. Technol. 2022 10.1007/s40684-022-00470-8

[17]

H.G. Li, Y.J. Huang, W.J. Zhao, T. Chen, J.F. Sun, D.Q. Wei, Q. Du, Y.C. Zou, Y.Z. Lu, P. Zhu, X. Lu, A.H.W. Ngan, Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment. Addit. Manuf. 50, 1 (2022)

[18]

M. Ahmed Obeidi, S.M. Uí Mhurchadha, R. Raghavendra, A. Conway, C. Souto, D. Tormey, I.U. Ahad, D. Brabazon, Comparison of the porosity and mechanical performance of 316L stainless steel manufactured on different laser powder bed fusion metal additive manufacturing machines. J. Mater. Res. Technol. 13, 2361–2374 (2021) 10.1016/j.jmrt.2021.06.027

[19]

A.H. Maamoun, Y.F. Xue, M.A. Elbestawi, S.C. Veldhuis, Effect of selective laser melting process parameters on the quality of Al alloy parts: powder characterization, density, surface roughness, and dimensional accuracy. Mater. (Basel) 2018;11(12) 10.3390/ma11122343

[20]

M. Gor, H. Soni, V. Wankhede, P. Sahlot, K. Grzelak, I. Szachgluchowicz, J. Kluczyński, A critical review on effect of process parameters on mechanical and microstructural properties of powder-bed fusion additive manufacturing of ss316l. Mater. (Basel) 2021;14(21) 10.3390/ma14216527

[21]

Y. Leng, D. Yang, P. Ming, B. Li, C. Zhang, The effects of Testing conditions on Corrosion behaviours of SS316L for bipolar plate of Proton Exchange Membrane Fuel Cell. ECS Meet Abstr. MA2021–02(37), 1109–1109 (2021) 10.1149/ma2021-02371109mtgabs

[22]

M. John, P.R. Kalvala, M. Misra, P.L. Menezes, Peening techniques for surface modification: processes, properties and applications. Mater. (Basel). 14(14), 3841 (2021) 10.3390/ma14143841

[23]

M.F. Ulum, A.K. Nasution, A.H. Yusop, A. Arafat, M.R.A. Kadir, V. Juniantito, D. Noviana, H. Hermawan, Evidences of in vivo bioactivity of Fe-bioceramic composites for temporary bone implants. J. Biomed. Mater. Res. - Part. B Appl. Biomater. 103(7), 1354–1365 (2015) 10.1002/jbm.b.33315

[24]

H. Zheng, H. Li, L. Lang, S. Gong, Y. Ge, Effects of scan speed on vapor plume behavior and spatter generation in laser powder bed fusion additive manufacturing. J Manuf Process. 2018;36:60–7. https://www.sciencedirect.com/science/article/pii/S1526612518313021 10.1016/j.jmapro.2018.09.011

[25]

B. Wu, J. Zheng, X.L. Bai, D.Y. Si, T.F. Luo, Z.Q. Zou, Fatigue crack propagation in thick-walled pressure vessels under hydraulic testing condition. J. Phys. Conf. Ser. 2478(12), 122052 (2023) 10.1088/1742-6596/2478/12/122052

[26]

A. Kausar, Study of Weld Quality characteristics of Tungsten Inert Gas Welding of Dissimilar metals SS 316L and IS 2062 plates. Int. J. Res. Appl. Sci. Eng. Technol. 7(6), 759–767 (2019) 10.22214/ijraset.2019.6131

[27]

A.M. Memon, I.H. Imran, L.M. Alhems, Neural network based corrosion modeling of Stainless Steel 316L elbow using electric field mapping data. Sci Rep. 2023;13(1):13088. https://doi.org/10.1038/s41598-023-40083-y 10.1038/s41598-023-40083-y

[28]

A comprehensive review on laser powder bed fusion of steels: Processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends

Shubhavardhan Ramadurga Narasimharaju, Wenhan Zeng, Tian Long See et al.

Journal of Manufacturing Processes 10.1016/j.jmapro.2021.12.033

[29]

M.J. Matthews, G. Guss, S.A. Khairallah, A.M. Rubenchik, P.J. Depond, W.E. King, Denudation of metal powder layers in laser powder bed fusion processes. Acta Mater. 2016;114:33–42. https://doi.org/10.1016/j.actamat.2016.05.017 10.1016/j.actamat.2016.05.017

[30]

L. Mugwagwa, I. Yadroitsava, N.W. Makoana, I. Yadroitsev, 9 - Residual stress in laser powder bed fusion. In: Yadroitsev I, Yadroitsava I, du Plessis A, MacDonald E, editors. Fundamentals of Laser Powder Bed Fusion of Metals. Elsevier; 2021. pp. 245–76. (Additive Manufacturing Materials and Technologies). https://www-sciencedirect-com.egateway.vit.ac.in/science/article/pii/B9780128240908000147 10.1016/b978-0-12-824090-8.00014-7

[31]

N.D. Dejene, H.G. Lemu, Current Status and challenges of Powder Bed Fusion-Based Metal Additive Manufacturing: Literature Review. Met. (Basel) 2023;13(2) 10.3390/met13020424

[32]

K.A. Shiyas, R. Ramanujam, A review on post processing techniques of additively manufactured metal parts for improving the material properties. Mater Today Proc. 2021;46:1429–36 10.1016/j.matpr.2021.03.016

[33]

T.B. Sirin, Y. Kaynak, Prediction of residual stress and distortion in laser powder bed fusion additive manufacturing process of Inconel 718 alloy. Procedia CIRP. 2021;99:330–5. https://doi.org/10.1016/j.procir.2021.03.102 10.1016/j.procir.2021.03.102

[34]

T. Laag, T.M. Winkel, L. Jauer, D. Heußen, C.L. Haefner, Improvement of Part Accuracy by Combination of Pulsed Wave (PW) and continuous Wave (CW) Laser Powder Bed Fusion. BHM Berg- und Hüttenmännische Monatshefte. 167(7), 308–317 (2022) 10.1007/s00501-022-01235-1

[35]

L. Caprio, A.G. Demir, B. Previtali, Understanding the effects of temporal waveform modulation of laser emission power in laser powder bed fusion: Part II - Experimental investigation. J Phys D Appl Phys. 2022;55(49):495110. https://doi.org/10.1088/1361-6463/ac98d1 10.1088/1361-6463/ac98d1

[36]

Laser powder bed fusion: a state-of-the-art review of the technology, materials, properties & defects, and numerical modelling

Sohini Chowdhury, N. Yadaiah, Chander Prakash et al.

Journal of Materials Research and Technology 10.1016/j.jmrt.2022.07.121

[37]

M. Malý, K. Nopová, L. Klakurková, O. Adam, L. Pantělejev, D. Koutný, Effect of preheating on the residual stress and Material properties of Inconel 939 processed by laser powder Bed Fusion. Mater. (Basel). 15(18), 1–16 (2022)

[38]

A. Kiran, M. Koukolíková, J. Vavřík, M. Urbánek, J. Džugan, Base plate preheating effect on microstructure of 316l stainless steel single track deposition by directed energy deposition. Mater. (Basel) 2021;14(18) 10.3390/ma14185129

[39]

J.H. Yu, Q.Y. Jin, K. Ha, W. Lee, Influence of several heat treatments on residual stress in Laser Powder Bed-Fused Maraging 18Ni-300 steel. Appl. Sci. 2023;13(11) 10.3390/app13116572

[40]

H. Roirand, B. Malard, A. Hor, N. Saintier, Effect of laser scan pattern in laser powder bed fusion process: The case of 316L stainless steel. Procedia Struct Integr. 2021;38(C):149–58. https://doi.org/10.1016/j.prostr.2022.03.016 10.1016/j.prostr.2022.03.016

[41]

M. Strantza, R.K. Ganeriwala, B. Clausen, T.Q. Phan, L.E. Levine, D.C. Pagan, J.P.C. Ruff, W.E. King, N.S. Johnson, R.M. Martinez, V. Anghel, G. Rafailov, D.W. Brown, Effect of the scanning strategy on the formation of residual stresses in additively manufactured Ti-6Al-4V. Addit Manuf. 2021;45:102003. https://doi.org/10.1016/j.addma.2021.102003 10.1016/j.addma.2021.102003

[42]

K. Bruggeman, N. Klingbeil, A. Palazotto, Residual Stress Generation in Additive Manufacturing of Complex Lattice Geometries. J Mater Eng Perform. 2024; https://doi.org/10.1007/s11665-024-09229-5 10.1007/s11665-024-09229-5

[43]

M. Boissier, G. Allaire, C. Tournier, Time Dependent scanning path optimization for the Powder Bed Fusion Additive Manufacturing process. CAD Comput. Aided Des. 2022;142 10.1016/j.cad.2021.103122

[44]

M. Kaess, M. Werz, S. Weihe, Residual stress formation mechanisms in laser powder Bed Fusion—A Numerical evaluation. Mater. (Basel) 2023;16(6) 10.3390/ma16062321

[45]

N. Peterson, Y. Kobayashi, P. Sanders, Assessment and Validation of Cosα Method for Residual Stress Measurement. 13th Inernational Conf Shot Peen. 2017;80–6

[46]

V. Praveen Kumar, A. Vinoth Jebaraj, Microscale investigations on additively manufactured Inconel 718: influence of volumetric energy density on microstructure, texture evolution, defects control and residual stress. Appl Phys A Mater Sci Process. 2023;129(5):1–17. https://doi.org/10.1007/s00339-023-06642-w 10.1007/s00339-023-06642-w

[47]

H. Ali, H. Ghadbeigi, K. Mumtaz, Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach. Int. J. Adv. Manuf. Technol. 97(5–8), 2621–2633 (2018) 10.1007/s00170-018-2104-9

[48]

L. Mugwagwa, I. Yadroitsev, S. Matope, Distortions, and porosity in selective laser melting. Met. (Basel) 2019;9(1042) 10.3390/met9101042

[49]

S. Sunny, R. Mathews, H. Yu, A. Malik, Effects of microstructure and inherent stress on residual stress induced during powder bed fusion with roller burnishing. Int J Mech Sci. 2022;219(January):107092. https://doi.org/10.1016/j.ijmecsci.2022.107092 10.1016/j.ijmecsci.2022.107092

[50]

A. Temmler, M. Cortina, I. Ross, M.E. Küpper, S.K. Rittinghaus, Evolution of Surface Topography and Microstructure in Laser Polishing of Cold Work Steel 1.2379 (AISI D2) using quadratic, top-hat shaped intensity distributions. Mater. (Basel) 2022;15(3) 10.3390/ma15030769

Showing 50 of 59 references

Cited By

5

The influence of linear energy density on density, defect formation, residual stress, microstructure, and texture in 310 austenitic stainless steel by laser powder bed fusion

P. Manikandan, K. Venkatesan · 2024

Journal of Manufacturing Processes

Metrics

5

Citations

59

References

Details

Published: Jun 18, 2024
Vol/Issue: 130(7)
License: View

Authors

Cite This Article

R. Haribaskar, T. Sampath kumar (2024). The impact of energy density and process parameters on the distribution of residual stresses in additively manufactured stainless steel 316 L. Applied Physics A, 130(7). https://doi.org/10.1007/s00339-024-07638-w

The impact of energy density and process parameters on the distribution of residual stresses in additively manufactured stainless steel 316 L

You May Also Like