As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting

T. Vilaro; C. Colin; J. D. Bartout

doi:10.1007/s11661-011-0731-y

journal article May 19, 2011

As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting

T. Vilaro C. Colin

J. D. Bartout

Metallurgical and Materials Transactions A Vol. 42 No. 10 pp. 3190-3199 · Springer Science and Business Media LLC

View at Publisher Save 10.1007/s11661-011-0731-y

Topics

No keywords indexed for this article. Browse by subject →

References

24

[1]

G.N. Levy, R. Schindel, and J.P. Kruth: Manufact. Technol., 2003, vol. 52, pp. 589–609.

[2]

M. Rombouts, J.P. Kruth, L. Froyen, and P. Mercelis: Manufact. Technol., 2006, vol. 55, pp. 187–92.

[3]

I. Yadroitsev, I. Shishkovsky, P. Bertrand, and I. Smurov: Appl. Surf. Sci., 2009, vol. 225, pp. 5523–27. 10.1016/j.apsusc.2008.07.154

[4]

T. Vilaro, V. Kottman-Rexerodt, M. Thomas, and C. Colin: Adv. Mater. Res., 2010, vols. 89–91, pp. 586–91. 10.4028/www.scientific.net/amr.89-91.586

[5]

Selective laser melting of iron-based powder

J.P. Kruth, L. Froyen, J. Van Vaerenbergh et al.

Journal of Materials Processing Technology 2004 10.1016/j.jmatprotec.2003.11.051

[6]

K.A. Mumtaz, P. Erasenthiran, and N. Hopkinson: J. Mater. Process. Technol., 2008, vol. 195, pp. 77–87. 10.1016/j.jmatprotec.2007.04.117

[7]

P.J. Maziasz: Scripta Mater., 1998, vol. 39, pp. 1471–76. 10.1016/s1359-6462(98)00349-2

[8]

N.W. Klingbeil, J.L. Beuth, R.K. Chin, and C.H. Amon: Int. J. Mech. Sci., 2002, vol. 44, pp. 57–77. 10.1016/s0020-7403(01)00084-4

[9]

M. Shiomi, K. Osakada, K. Nakamura, T. Yamashita, and F. Abe: Manufact. Technol., 2004, vol. 53, pp. 195–98.

[10]

L.E. Murr, S.A. Quinones, and S.M. Gaytan: J. Mech. Behav. Biomed. Mater., 2009, vol. 2, pp. 20–32. 10.1016/j.jmbbm.2008.05.004

[11]

S.H. Mok, G. Bi, J. Folkes, I. Pashby, and J. Segal: Surf. Coat. Technol., 2008, vol. 202, pp. 4613–19. 10.1016/j.surfcoat.2008.03.028

[12]

Y. Combres: Traitements Thermiques des Alliages de Titane, Techniques de l’Ingénieur, M1335, 1995. 10.51257/a-v2-m1335

[13]

I. Yadroitsev, L. Thivillon, P. Bertrand, and I. Smurov: Appl. Surf. Sci., 2007, vol. 254, pp. 980–83. 10.1016/j.apsusc.2007.08.046

[14]

J. Maisonneuve: Ph.D. Thesis, ENSMP, Mines ParisTech, Paris, 2008.

[15]

X. Wu: J. Eng. Mater. Technol., 2003, vol. 135, pp. 266–70. 10.1016/s0924-0136(02)00906-8

[16]

M. Qian, J. Mei, J. Liang, and X. Wu: Mater. Sci. Technol., 2005, vol. 21, pp. 597–605. 10.1179/174328405x21003

[17]

A. Longuet: Ph.D. Thesis, ENSMP, Mines ParisTech, Paris, 2010.

[18]

J.W. Elmer, T.A. Palmer, S.S. Babu, W. Zhang, and T. DebRoy: J. Appl. Phys., 2004, vol. 95, pp. 8327–39. 10.1063/1.1737476

[19]

F. Delannay, D. Pardoen, and C. Colin: Acta Mater., 2005, vol. 53, pp. 1655–64. 10.1016/j.actamat.2004.12.015

[20]

F.X. Gil: J. Alloys Compd., 1996, vol. 234, p. 287. 10.1016/0925-8388(95)02057-8

[21]

T. Ahmed and H.J. Rack: Mater. Sci. Eng., 1998, vol. A243, pp. 206–11. 10.1016/s0921-5093(97)00802-2

[22]

D. Franois, A. Pineau, and A. Zaoui: Comportement Mécanique des Matériaux, Hermès Science Publications, Paris, 2009.

[23]

L.T. Lee: Mater. Sci. Eng., 1990, vol. 128, pp. 77–89. 10.1016/0921-5093(90)90097-m

[24]

B. Hadj Sassi: Ph.D. Thesis, ENSTA ParisTech, Paris, 1977.

Cited By

1,174

Engineerable mechanical anisotropy via solidification microstructure mapping in high-entropy alloy by laser powder bed fusion additive manufacturing

Hui Kong, Chenze Li · 2026

Materials Science and Engineering:...

Data-driven assisted metallurgical defect control and the mechanism of ductility enhancement for titanium alloys using electron beam powder bed fusion

Yunwei Gui, Kenta Aoyagi · 2026

Materials Science and Engineering:...

Ultra-strong and ductile low-alloy titanium by additive manufacturing

Chuanxi Ren, Xiangyuan Cui · 2026

Materials Today

Tribocorrosion of selective laser melted (SLM) Ti–6Al–4V: effect of an oxygen diffusion layer formed by thermal oxidation

Mahsa Mohammadi, Behrooz Rahmatian · 2026

Journal of Materials Research and T...

In-situ synthesis of TiC reinforced titanium-tungsten composite via laser directed energy deposition

Fan Wu, Tianqi Wang · 2025

Journal of Alloys and Compounds

Microstructural heterogeneity and anisotropic mechanical propertiers of titanium alloys manufactured by wire arc additive manufacturing: A review

Mohammad amin Zarei, Moein G. Shabestari · 2025

Journal of Materials Research and T...

Enhancing the wear resistance of Nano-TiC/TC4 composites through the annular oscillating laser deposition

Tao Wang, Jintao Wen · 2025

Optics and Lasers in Engineering

A comparative study on microstructure and mechanical properties of 17-4PH processed by a laser powder bed fusion vs rolling process

Thabet A. M. Sghaier, Habib Sahlaoui · 2024

Progress in Additive Manufacturing

Effect of Heat Treatment on Microstructure and Mechanical Properties of Titanium Alloy Fabricated by Laser–Arc Hybrid Additive Manufacturing

Yuhang Chen, Juan Fu · 2024

Coatings

Effects of post-heat treatments on the microstructure and mechanical properties of Ti–6Al–4V alloy fabricated by selective laser melting

Yuantao Zhao, Yongkang Yue · 2024

Journal of Materials Research and T...

Machine learning prediction of mechanical properties in metal additive manufacturing

Parand Akbari, Masoud Zamani · 2024

Additive Manufacturing

Life prediction and failure analysis in laser powder bed fused TiC/Ti6Al4V titanium matrix composite under high cycle and very high cycle fatigue conditions

C. Li, W. Li · 2024

International Journal of Fatigue

Manufacturing of metallic glass components: Processes, structures and properties

Sajad Sohrabi, Jianan Fu · 2024

Progress in Materials Science

Heat treatment for metal additive manufacturing

Majid Laleh, Esmaeil Sadeghi · 2023

Progress in Materials Science

A novel electropulsing treatment to improve the surface strength and repair the pore of additively manufactured Ti-6Al-4V alloy

Xudong Yan, Xiaofeng Xu · 2023

Surface and Coatings Technology

Microstructure and Mechanical Properties of an Ultrahigh-strength Titanium alloy Ti-4.5Al-5Mo-5V-6Cr-1Nb Prepared Using Laser Directed Energy Deposition and Forging: A Comparative Study

Junwei Yang, Haibo Tang · 2023

Chinese Journal of Mechanical Engin...

Mechanical Properties of Ti6Al4V Fabricated by Laser Powder Bed Fusion: A Review Focused on the Processing and Microstructural Parameters Influence on the Final Properties

Flávio Bartolomeu, Michael Gasik · 2022

Metals

Laser powder bed fusion: a state-of-the-art review of the technology, materials, properties & defects, and numerical modelling

Sohini Chowdhury, N. Yadaiah · 2022

Journal of Materials Research and T...

A comprehensive review on laser powder bed fusion of steels: Processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends

Shubhavardhan Ramadurga Narasimharaju, Wenhan Zeng · 2022

Journal of Manufacturing Processes

A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties

Hung Dang Nguyen, A. Pramanik · 2022

Journal of Materials Research and T...

Metrics

1,174

Citations

24

References

Details

Published: May 19, 2011
Vol/Issue: 42(10)
Pages: 3190-3199
License: View

Authors

Cite This Article

T. Vilaro, C. Colin, J. D. Bartout (2011). As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting. Metallurgical and Materials Transactions A, 42(10), 3190-3199. https://doi.org/10.1007/s11661-011-0731-y

As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting

You May Also Like