A novel electropulsing treatment to improve the surface strength and repair the pore of additively manufactured Ti-6Al-4V alloy

Xudong Yan; Xiaofeng Xu; Chao Wu; Yang Zhao; Dongdong Li; Yachong Zhou; Lai Wei

doi:10.1016/j.surfcoat.2023.129364

journal article Apr 01, 2023

A novel electropulsing treatment to improve the surface strength and repair the pore of additively manufactured Ti-6Al-4V alloy

Xudong Yan Xiaofeng Xu

Chao Wu

Yang Zhao

Dongdong Li

Yachong Zhou Lai Wei

Surface and Coatings Technology Vol. 458 pp. 129364 · Elsevier BV

View at Publisher Save 10.1016/j.surfcoat.2023.129364

Topics

No keywords indexed for this article. Browse by subject →

References

62

[1]

Safavi "Additive manufacturing: an opportunity for the fabrication of near-net-shape NiTi implants" J. Manuf. Mater. Process. (2022)

[2]

Amin Yavari "Fatigue behavior of porous biomaterials manufactured using selective laser melting" Mater. Sci. Eng. (2013) 10.1016/j.msec.2013.08.006

[3]

Ciliveri "Influence of strut-size and cell-size variations on porous Ti6Al4V structures for load-bearing implants" J. Mech. Behav. Biomed. Mater. (2022) 10.1016/j.jmbbm.2021.105023

[4]

Vastola "Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling" Addit. Manuf. (2016)

[5]

A study of the microstructural evolution during selective laser melting of Ti–6Al–4V

Lore Thijs, Frederik Verhaeghe, Tom Craeghs et al.

Acta Materialia 2010 10.1016/j.actamat.2010.02.004

[6]

Zhao "Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting" Mater. Des. (2016) 10.1016/j.matdes.2015.12.135

[7]

Additive manufacturing of metals

Dirk Herzog, Vanessa Seyda, Eric Wycisk et al.

Acta Materialia 2016 10.1016/j.actamat.2016.07.019

[8]

Sharma "Insights into the wear behaviour of electron beam melted Ti–6Al–4V alloy in the as-built and the heat-treated conditions" J. Manuf. Process. (2021) 10.1016/j.jmapro.2021.09.060

[9]

Gong "Analysis of defect generation in ti-6Al-4V parts made using powder bed fusion additive manufacturing processes" Addit. Manuf. (2014)

[10]

Additive manufacturing of Ti6Al4V alloy: A review

Shunyu Liu, Yung C. Shin

Materials & Design 2019 10.1016/j.matdes.2018.107552

[11]

Kim "Characterization of Ti–6Al–4V alloy modified by plasma carburizing process" Mater. Sci. Eng. A (2003) 10.1016/s0921-5093(03)00559-8

[12]

Tong (2016)

[13]

Biswal "Criticality of porosity defects on the fatigue performance of wire + arc additive manufactured titanium alloy" Int. J. Fatigue (2019) 10.1016/j.ijfatigue.2019.01.017

[14]

Pyka "Surface modification of Ti6Al4V open porous structures produced by additive manufacturing" Adv. Eng. Mater. (2012) 10.1002/adem.201100344

[15]

Hosseini "Tackling the challenges facing the clinical applications of pure PEO hydroxyapatite layers: co-deposition of YSZ nanoparticles" Mater. Chem. Phys. (2023) 10.1016/j.matchemphys.2022.126899

[16]

Sarma "Recent advances in surface hardening of titanium" JOM (2011) 10.1007/s11837-011-0035-0

[17]

Zhao "Interfacial and tribological properties of laser deposited TiOxNy/Ti composite coating on ti alloy" Tribol. Int. (2021) 10.1016/j.triboint.2020.106758

[18]

Campanelli "A review on the recent advances concerning the fatigue performance of titanium alloys for orthopedic applications" J. Mater. Res. (2021) 10.1557/s43578-020-00087-0

[19]

Wagner (1982)

[20]

Konstantino (2013)

[21]

Hou "Accelerated solid solution and aging induced by electropulsing in Mg-Al-Ca-Mn alloy" Mater. Lett. (2022) 10.1016/j.matlet.2022.132209

[22]

Application of High-Density Electropulsing to Improve the Performance of Metallic Materials: Mechanisms, Microstructure and Properties

Yinying Sheng, Youlu Hua, Xiaojian Wang et al.

Materials 2018 10.3390/ma11020185

[23]

Lin "Effects of pulse current stimulation on the thermal fatigue crack propagation behavior of CHWD steel" Mater. Sci. Eng. A (2008) 10.1016/j.msea.2007.05.077

[24]

Song "Self-healing of damage inside metals triggered by electropulsing stimuli" Sci. Rep. (2017)

[25]

Qi "Theoretical and experimental analysis of electric contact surface hardening of ductile iron" Appl. Surf. Sci. (2014) 10.1016/j.apsusc.2013.10.078

[26]

Qi "Rolling contact fatigue performance of ductile iron improved by electric contact surface strengthening" Tribol. Int. (2013) 10.1016/j.triboint.2012.10.012

[27]

Del Guercio "Microstructure and mechanical performance of Ti–6Al–4V lattice structures manufactured via electron beam melting (EBM)A Review" Acta Metall. Sin. (English Lett.) (2020) 10.1007/s40195-020-00998-1

[28]

On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium

W.G. Burgers

Physica 1934 10.1016/s0031-8914(34)80244-3

[29]

Karthikeyan "Evaluation of misorientation angle-axis set between variants during transformation of bcc to hcp phase obeying burgers orientation relation" Scr. Mater. (2006) 10.1016/j.scriptamat.2006.07.022

[30]

Al-Bermani "The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V" Metall. Mater. Trans. A Phys. Metall. Mater. Sci. (2010) 10.1007/s11661-010-0397-x

[31]

As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting

T. Vilaro, C. Colin, J. D. Bartout

Metallurgical and Materials Transactions A 2011 10.1007/s11661-011-0731-y

[32]

Saber-Samandari "Effect of angled indentation on mechanical properties" J. Eur. Ceram. Soc. (2009) 10.1016/j.jeurceramsoc.2009.03.010

[33]

Ren "3-D modelling of the coaxial one-side resistance spot welding of AL5052/CFRP dissimilar material" J. Manuf. Process. (2021) 10.1016/j.jmapro.2021.06.023

[34]

Bharatish "Evaluation of thermal residual stresses in laser drilled alumina ceramics using micro-Raman spectroscopy and COMSOL multiphysics" Opt. Laser Technol. (2015) 10.1016/j.optlastec.2015.01.009

[35]

Shen "Influence of laser post-processing on pore evolution of Ti–6Al–4V alloy by laser powder bed fusion" J. Alloys Compd. (2020) 10.1016/j.jallcom.2019.152845

[36]

Yu "Dissimilar metal joining of Q235 mild steel to Ti6Al4V via resistance spot welding with Ni–Cu interlayer" J. Mater. Res. Technol. (2021) 10.1016/j.jmrt.2021.10.039

[37]

Zhao "Numerical modeling of the thermal behavior and residual stress in the direct metal laser sintering process of titanium alloy products" Addit. Manuf. (2017)

[38]

Saber-Samandari "Selection of the implant and coating materials for optimized performance by means of nanoindentation" Acta Biomater. (2011) 10.1016/j.actbio.2010.09.023

[39]

Al-Sayed "Characterization of a laser surface-treated martensitic stainless steel" Materials (Basel) (2017) 10.3390/ma10060595

[40]

Dewi "Microstructure and mechanical properties of laser surface treated 44MnSiVS6 microalloyed steel" Opt. Laser Technol. (2020) 10.1016/j.optlastec.2020.106139

[41]

Shipley "Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: a review" Int. J. Mach. Tools Manuf. (2018) 10.1016/j.ijmachtools.2018.01.003

[42]

Liu "Achieving Ti6Al4V alloys with both high strength and ductility via selective laser melting" Mater. Sci. Eng. A (2019) 10.1016/j.msea.2019.138319

[43]

Xie "Novel approach of electroshock treatment for defect repair in near-β titanium alloy manufactured via directed energy deposition" Metall. Mater. Trans. A Phys. Metall. Mater. Sci. (2021) 10.1007/s11661-020-06098-0

[44]

Conrad "Effects of electric current on solid state phase transformations in metals" Mater. Sci. Eng. A (2000) 10.1016/s0921-5093(00)00780-2

[45]

Elmer "Phase transformation dynamics during welding of ti-6Al-4V" J. Appl. Phys. (2004) 10.1063/1.1737476

[46]

Sun "Laser surface hardening of 42CrMo cast steel for obtaining a wide and uniform hardened layer by shaped beams" Int. J. Adv. Manuf. Technol. (2014) 10.1007/s00170-013-5292-3

[47]

Telasang "Structure-property correlation in laser surface treated AISI H13 tool steel for improved mechanical properties" Mater. Sci. Eng. A (2014) 10.1016/j.msea.2014.01.083

[48]

Beladi "Variant selection and intervariant crystallographic planes distribution in martensite in a Ti–6Al–4V alloy" Acta Mater. (2014) 10.1016/j.actamat.2014.06.064

[49]

Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties

Bey Vrancken, Lore Thijs, Jean-Pierre Kruth et al.

Journal of Alloys and Compounds 2012 10.1016/j.jallcom.2012.07.022

[50]

Brandl "Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments" Mater. Lett. (2012) 10.1016/j.matlet.2012.04.116

Showing 50 of 62 references

Metrics

22

Citations

62

References

Details

Published: Apr 01, 2023
Vol/Issue: 458
Pages: 129364
License: View

Authors

School of Astronautics, Harbin Institute of Technology, People’s Republic of China

Funding

National Natural Science Foundation of China Award: 51701080

Shandong Province Natural Science Foundation Award: ZR202102220408

National Key Research and Development Program of China Award: 2020YFB2008300

Cite This Article

Xudong Yan, Xiaofeng Xu, Chao Wu, et al. (2023). A novel electropulsing treatment to improve the surface strength and repair the pore of additively manufactured Ti-6Al-4V alloy. Surface and Coatings Technology, 458, 129364. https://doi.org/10.1016/j.surfcoat.2023.129364

A novel electropulsing treatment to improve the surface strength and repair the pore of additively manufactured Ti-6Al-4V alloy

You May Also Like