journal article Feb 01, 2023

Enhancing fiber-matrix interface in carbon fiber/poly ether ether ketone (CF/PEEK) composites by carbon nanotube reinforcement of crystalline PEEK sizing

View at Publisher Save 10.1016/j.compositesb.2022.110470
Topics

No keywords indexed for this article. Browse by subject →

References
44
[1]
Henninger F, Hoffmann J, Friedrich K. Thermoplastic filament winding with online-impregnation. Part B. Experimental study of processing parameters. Compos Part A-APPL https://doi.org/10.1016/S1359–835X(02)00136-7. 10.1016/s1359-835x(02)00136-7
[2]
Dong "Effect of interlaying UV-irradiated PEEK fibres on the mechanical, impact and fracture response of aerospace-grade carbon fibre/epoxy composites" Compos B Eng (2020)
[3]
Goh "Additively manufactured continuous carbon fiber-reinforced thermoplastic for topology optimized unmanned aerial vehicle structures" Compos B Eng (2021) 10.1016/j.compositesb.2021.108840
[4]
Boris "Optimization of parts manufactured using continuous fiber three-dimensional printing technology" Compos B Eng (2021)
[5]
Dillon "Blast response of carbon-fiber/epoxy laminates subjected to long-term seawater exposure at sea floor depth pressures" Compos B Eng (2021)
[6]
Hui-Jin "Design and manufacture of thermoplastic carbon fiber/polyethylene terephthalate composites underbody shield to protect the lithium-ion batteries for electric mobility from ground impact" Compos B Eng (2022)
[7]
Zhang "Current status of carbon fibre and carbon fibre composites recycling" Compos B Eng (2020) 10.1016/j.compositesb.2020.108053
[8]
Li "Detection and evaluation of damage in aircraft composites using electromagnetically coupled inductors" Compos Struct (2016) 10.1016/j.compstruct.2015.12.054
[9]
Yuanduo "Ultrasonic welding of short carbon fiber reinforced PEEK with spherical surface anvils" Compos B Eng (2022)
[10]
Kiss "The effect of thermally desized carbon fibre reinforcement on the flexural and impact properties of PA6, PPS and PEEK composite laminates: a comparative study" Compos B Eng (2021) 10.1016/j.compositesb.2021.108844
[11]
Schwitalla "Maximum insertion torque of a novel implant-abutment-interface design for PEEK dental implants" J Mech Behav Biomed Mater (2018) 10.1016/j.jmbbm.2017.09.005
[12]
Chou "Correlation of damage resistance under low velocity impact and Mode II delamination resistance in CFRP laminates" Adv Compos Mater (1999) 10.1163/156855199x00173
[13]
Yao "Experimental study on CF/PEEK thermoplastic fastener: effects of fastener matrix crystallinity and fibre content on the strength of single-lap joint" Compos B Eng (2021)
[14]
Tan "Enhanced interfacial bonding strength of laser bonded titanium alloy/CFRTP joint via hydrogen bonds interaction" Compos B Eng (2022) 10.1016/j.compositesb.2022.109966
[15]
Yan "Interfacial enhancement of CF/PEEK composites by modifying water-based PEEK-NH2 sizing agent" Compos B Eng (2020) 10.1016/j.compositesb.2020.108258
[16]
Wu "Significantly increasing the interfacial adhesion of carbon fiber composites via constructing a synergistic hydrogen bonding network by vacuum filtration" Compos B Eng (2021) 10.1016/j.compositesb.2021.109300
[17]
Hu "Water-based PEKC-COOH sizing agent for enhancing the interfacial adhesion of carbon fiber/polyether-ether-ketone composites" Compos B Eng (2021) 10.1016/j.compositesb.2021.109279
[18]
Alexandre "Effect of PEKK oligomers sizing on the dynamic mechanical behavior of poly(ether ketone ketone)/carbon fiber composites" J Appl Polym Sci (2020) 10.1002/app.48818
[19]
Hassan "Highly boosting the interlaminar shear strength of CF/PEEK composites via introduction of PEKK onto activated CF" Compos Part A Appl Sci Manuf (2018) 10.1016/j.compositesa.2018.05.029
[20]
Gao "Higher mechanical performances of CF/PEEK composite laminates via reducing interlayer porosity based on the affinity of functional s-PEEK" Polym Compos (2019) 10.1002/pc.25236
[21]
Wang "PEEK composites with polyimide sizing SCF as reinforcement: preparation, characterization, and mechanical properties" High Perform Polym (2019) 10.1177/0954008319867383
[22]
Hassan "Surface modification of carbon fibers by grafting PEEK-NH2 for improving interfacial adhesion with polyetheretherketone" Materials (2019) 10.3390/ma12050778
[23]
Hassan "Enhancing CF/PEEK composites by CF decoration with polyimide and loosely-packed CNT arrays" Compos Part A Appl Sci Manuf (2019) 10.1016/j.compositesa.2019.105613
[24]
Hassan "Synergistic effect of hydrogen bonding and π-π stacking in interface of CF/PEEK composites" Compos B Eng (2019) 10.1016/j.compositesb.2019.04.015
[25]
Liu "Effect of SiO2 nanoparticles-decorated SCF on mechanical and tribological properties of cenosphere/SCF/PEEK composites" J Appl Polym Sci (2020)
[26]
Chen "Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI and graphene oxide complex sizing at the interface" Compos Sci Technol (2018) 10.1016/j.compscitech.2017.11.005
[27]
Díez-Pascual "Novel nanocomposites reinforced with hydroxylated poly(ether ether ketone)-grafted carbon nanotubes" J Mater Chem (2010) 10.1039/c0jm01531h
[28]
Colquhoun "Reversible, nondegradative conversion of crystalline aromatic poly(ether ketone)s into organo-soluble poly(ether dithioketal)s" Macromolecules (2009) 10.1021/ma8023377
[29]
Yang "Strong interface construction of carbon fiber–reinforced PEEK composites: an efficient method for modifying carbon fiber with crystalline PEEK" Macromol Rapid Commun (2020) 10.1002/marc.202000001
[30]
Wagner "Study of the interface in Kevlar 49-epoxy composites by means of microbond and fragmentation tests: effects of materials and testing variables" J Mater Sci (1993) 10.1007/bf00367590
[31]
Nishikawa "Micromechanical modeling of the microbond test to quantify the interfacial properties of fiber-reinforced composites" Int J Solid Struct (2008) 10.1016/j.ijsolstr.2008.02.021
[32]
Li "Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibers" Carbon N Y (2013) 10.1016/j.carbon.2012.09.011
[33]
Kamae "Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase - Part I: the development of carbon nanotube coated carbon fibers and the evaluation of their adhesion" Compos Part A Appl Sci Manuf (2012) 10.1016/j.compositesa.2012.02.016
[34]
Klonos "Morphology, crystallization and rigid amorphous fraction in PDMS adsorbed onto carbon nanotubes and graphite" Polymer (Guildf) (2018) 10.1016/j.polymer.2018.02.020
[35]
Li "Interfacial studies on the ozone and air-oxidation-modified carbon fiber reinforced PEEK composites" Surf Interface Anal (2009) 10.1002/sia.3023
[36]
Hu J, Yan F, Liu H, Zhao L, Li Z, Liu Y, Ao Y, Liu L. Water-based PEKC-COOH sizing agent for enhancing the interfacial adhesion of carbon fiber/polyether-ether-ketone composites. Compos B Eng https://doi.org/10.1016/j.compositesb.2021.109279. 10.1016/j.compositesb.2021.109279
[37]
Lu "Wettability and interfacial properties of carbon fiber and poly(ether ether ketone) fiber hybrid composite" ACS Appl Mater Interfaces (2019) 10.1021/acsami.9b09735
[38]
Shenogin "Role of thermal boundary resistance on the heat flow in carbon-nanotube composites" J Appl Phys (2004) 10.1063/1.1736328
[39]
Hao "The influences of grafting density and polymer–nanoparticle interaction on crystallisation of polymer composites" Mol Simulat (2020) 10.1080/08927022.2019.1587760
[40]
Kai "Carbon nanotube-geopolymer nanocomposites: a molecular dynamics study of the influence of interfacial chemical bonding upon the structural and mechanical properties" Carbon N Y (2020) 10.1016/j.carbon.2020.02.014
[41]
Wang "Engineering the mechanical properties of CNT/PEEK nanocomposites" RSC Adv (2019) 10.1039/c9ra01212e
[42]
de Gennes (1980)
[43]
Wang "Direct electrochemical grafting of crystalline PAEK macromolecule on carbon fiber to enhance the interfacial properties of PEEK/CF composites" Compos Sci Technol (2022) 10.1016/j.compscitech.2022.109262
[44]
Yuan C, Li D, Yuan X, Liu L, Huang Y. Preparation of semi-aliphatic polyimide for organic-solvent-free sizing agent in CF/PEEK composites. Compos Sci Technol https://doi.org/10.1016/j.compscitech.2020.108490. 10.1016/j.compscitech.2020.108490
Metrics
92
Citations
44
References
Details
Published
Feb 01, 2023
Vol/Issue
251
Pages
110470
License
View
Cite This Article
Shengdao Wang, Tianjiao Wang, Shuwen Zhang, et al. (2023). Enhancing fiber-matrix interface in carbon fiber/poly ether ether ketone (CF/PEEK) composites by carbon nanotube reinforcement of crystalline PEEK sizing. Composites Part B: Engineering, 251, 110470. https://doi.org/10.1016/j.compositesb.2022.110470