Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites

Abhishek K. Pathak; Munu Borah; Ashish Gupta; T. Yokozeki; Sanjay R. Dhakate

doi:10.1016/j.compscitech.2016.09.007

journal article Oct 01, 2016

Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites

Abhishek K. Pathak Munu Borah Ashish Gupta

T. Yokozeki Sanjay R. Dhakate

Composites Science and Technology Vol. 135 pp. 28-38 · Elsevier BV

View at Publisher Save 10.1016/j.compscitech.2016.09.007

Topics

No keywords indexed for this article. Browse by subject →

References

62

[1]

Argon "Toughenability of polymers" Polymer (2003) 10.1016/s0032-3861(03)00546-9

[2]

Garg "Failure mechanisms in toughened epoxy resins—a review" Compos. Sci. Technol. (1988) 10.1016/0266-3538(88)90009-7

[3]

Koricho "Bending fatigue behavior of twill fabric E-glass/epoxy composite" Compos. Struct. (2014) 10.1016/j.compstruct.2013.12.032

[4]

Friedrich "Recent advances in polymer composites' tribology" Wear (1995) 10.1016/0043-1648(96)80012-3

[5]

Cirino "Evaluation of polymer composites for sliding and abrasive wear applications" Composites (1988) 10.1016/0010-4361(88)90126-7

[6]

Jamison "Characterization and analysis of damage mechanisms in tension-tension fatigue of graphite/epoxy laminates" Eff. Defects Compos. Mater. (1984) 10.1520/stp30196s

[7]

Degrieck "Fatigue damage modeling of fibre-reinforced composite materials: review" Appl. Mech. Rev. (2001) 10.1115/1.1381395

[8]

Davim "Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments" Compos. Struct. (2003) 10.1016/s0263-8223(02)00257-x

[9]

Choi "Delamination fracture of multidirectional carbon-fiber/epoxy composites under mode I, mode II and mixed-mode I/II loading" J. Compos. Mater. (1999) 10.1177/002199839903300105

[10]

Chand "Review carbon fibers for composites" J. Mater. Sci. (2000) 10.1023/a:1004780301489

[11]

Mouritz "Review of z-pinned composite laminates" Compos. Part A Appl. Sci. Manuf. (2007) 10.1016/j.compositesa.2007.08.016

[12]

Jain "On the effect of stitching on mode I delamination toughness of laminated composites" Compos. Sci. Technol. (1994) 10.1016/0266-3538(94)90103-1

[13]

Porous scaffold design for tissue engineering

Scott J. Hollister

Nature Materials 2005 10.1038/nmat1421

[14]

Delamar "Modification of carbon fiber surfaces by electrochemical reduction of aryl diazonium salts: application to carbon epoxy composites" Carbon (1997) 10.1016/s0008-6223(97)00010-9

[15]

Severini "Chemical modification of carbon fiber surfaces" Carbon (2002) 10.1016/s0008-6223(01)00180-4

[16]

Allongue "Covalent modification of carbon surfaces by aryl radicals generated from the electrochemical reduction of diazonium salts" J. Am. Chem. Soc. (1997) 10.1021/ja963354s

[17]

Arbelaiz "Mechanical properties of short flax fibre bundle/polypropylene composites: influence of matrix/fibre modification, fibre content, water uptake and recycling" Compos. Sci. Technol. (2005) 10.1016/j.compscitech.2005.01.008

[18]

Mimura "Improvement of thermal and mechanical properties by control of morphologies in PES-modified epoxy resins" Polymer (2000) 10.1016/s0032-3861(99)00700-4

[19]

Gojny "Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites" Compos. Part A Appl. Sci. Manuf. (2005) 10.1016/j.compositesa.2005.02.007

[20]

Kornmann "Epoxy-layered silicate nanocomposites as matrix in glass fibre-reinforced composites" Compos. Sci. Technol. (2005) 10.1016/j.compscitech.2005.02.006

[21]

Marras "Morphological, thermal, and mechanical characteristics of polymer/layered silicate nanocomposites: the role of filler modification level" Polym. Eng. Sci. (2009) 10.1002/pen.21203

[22]

He "Preparation of a carbon nanotube/carbon fiber multi-scale reinforcement by grafting multi-walled carbon nanotubes onto the fibers" Carbon (2007) 10.1016/j.carbon.2007.08.018

[23]

Moaseri "Fabrication of multi-walled carbon nanotube–carbon fiber hybrid material via electrophoretic deposition followed by pyrolysis process" Compos. Part A Appl. Sci. Manuf. (2014) 10.1016/j.compositesa.2014.01.009

[24]

Chou "An assessment of the science and technology of carbon nanotube-based fibers and composites" Compos. Sci. Technol. (2010) 10.1016/j.compscitech.2009.10.004

[25]

Jyoti "Superior mechanical and electrical properties of multiwall carbon nanotube reinforced acrylonitrile butadiene styrene high performance composites" Compos. Part B Eng. (2015) 10.1016/j.compositesb.2015.08.055

[26]

Aldajah "Transverse strength enhancement of carbon fiber reinforced polymer composites by means of magnetically aligned carbon nanotubes" Mater. Des. (2012) 10.1016/j.matdes.2011.07.013

[27]

Bekyarova "Functionalized single-walled carbon nanotubes for carbon fiber-epoxy composites" J. Phys. Chem. C (2007) 10.1021/jp071329a

[28]

Ogasawara "Mechanical properties of carbon fiber/fullerene-dispersed epoxy composites" Compos. Sci. Technol. (2009) 10.1016/j.compscitech.2009.05.003

[29]

Tayfun "Mechanical, flow and electrical properties of thermoplastic polyurethane/fullerene composites: effect of surface modification of fullerene" Compos. Part B Eng. (2015) 10.1016/j.compositesb.2015.05.013

[30]

Shokrieh "Fabrication and mechanical properties of clay/epoxy nanocomposite and its polymer concrete" Mater. Des. (2012) 10.1016/j.matdes.2012.03.008

[31]

Xu "Mechanical properties of carbon fiber reinforced epoxy/clay nanocomposites" Compos. Sci. Technol. (2008) 10.1016/j.compscitech.2007.08.013

[32]

Vaganov "Influence of multiwalled carbon nanotubes on the processing behavior of epoxy powder compositions and on the mechanical properties of their fiber reinforced composites" Polym. Compos. (2016) 10.1002/pc.23419

[33]

Graphene-based composite materials

Sasha Stankovich, Dmitriy A. Dikin, Geoffrey H. B. Dommett et al.

Nature 2006 10.1038/nature04969

[34]

Ruan "Enhanced physiochemical and mechanical performance of chitosan-grafted graphene oxide for superior osteoinductivity" Adv. Funct. Mater. (2015) 10.1002/adfm.201504141

[35]

Zhang "Multifunctional pristine chemically modified graphene films as strong as stainless steel" Adv. Mater. (2015) 10.1002/adma.201503045

[36]

Woltornist "Polymer/pristine graphene based composites: from emulsions to strong" Electr. Conduct. Foams Macromol. (2015)

[37]

Pang "The effect of electric field, annealing temperature and filler loading on the percolation threshold of polystyrene containing carbon nanotubes and graphene nanosheets" Carbon (2011) 10.1016/j.carbon.2011.01.023

[38]

Song "Fabrication of exfoliated graphene-based polypropylene nanocomposites with enhanced mechanical and thermal properties" Polymer (2011) 10.1016/j.polymer.2011.06.045

[39]

Zhang "Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide" ACS Appl. Mater. Interfaces (2012) 10.1021/am201757v

[40]

Hummers "Preparation of graphitic oxide" J. Am. Chem. Soc. (1958) 10.1021/ja01539a017

[41]

Zhu "Graphene and graphene oxide: synthesis, properties, and applications" Adv. Mater. (2010) 10.1002/adma.201001068

[42]

Dreyer "The chemistry of graphene oxide" Chem. Soc. Rev. (2010) 10.1039/b917103g

[43]

Improved Synthesis of Graphene Oxide

Daniela C. Marcano, Dmitry V. Kosynkin, Jacob M. Berlin et al.

ACS Nano 2010 10.1021/nn1006368

[44]

Breitmaier (1987)

[45]

Lerf "Structure of graphite oxide revisited" J. Phys. Chem. B (1998) 10.1021/jp9731821

[46]

Jeong "Evidence of graphitic AB stacking order of graphite oxides" J. Am. Chem. Soc. (2008) 10.1021/ja076473o

[47]

Wang "Tailoring oxidation degrees of graphene oxide by simple chemical reactions" Appl. Phys. Lett. (2011) 10.1063/1.3622637

[48]

Song "Mechanical and physical properties of MWCNT/carbon composites with matrix derived from mesocarbon microbeads" Carbon (2008) 10.1016/j.carbon.2008.03.018

[49]

Titantah "sp 3/sp 2 characterization of carbon materials from first-principles calculations: X-ray photoelectron versus high energy electron energy-loss spectroscopy techniques" Carbon (2005) 10.1016/j.carbon.2005.01.002

[50]

Livneh "Distinguishing disorder-induced bands from allowed Raman bands in graphite" Phys. Rev. B (2002) 10.1103/physrevb.66.195110

Showing 50 of 62 references

Cited By

449

Self-assembling of few-layer graphene onto glass fibers and strength enhancement mechanism of few-layer graphene-reinforced GFRP

Kumpei Ogawa, Kota Tanaka · 2026

Composites Part A: Applied Science...

Epoxy composites reinforced with nanomaterials and fibres: Manufacturing, properties, and applications

Pooya Parvizi, Milad Jalilian · 2025

Polymer Testing

Shape memory, mechanical and thermomechanical property comparison in MWCNT and GnP modified Bi‐directional (plain) carbon fiber polymer composites

Ritesh Gupta, Nilesh Tiwari · 2024

Polymer Composites

POSS/EHTPB synergistically toughened epoxy resin for cryogenic application

Yu Zhang, Gang Wang · 2024

Polymer

Elevating mechanical and biotribological properties of carbon fiber composites by constructing graphene-silicon nitride nanowires interlocking interfacial enhancement

Xinyi Wan, Leilei Zhang · 2024

Journal of Materiomics

Mechanical, morphological, and thermal characteristics of epoxy/glass fiber/cellulose nanofiber hybrid composites

Taufik Azhary, Kusmono · 2022

Polymer Testing

An Overview on Carbon Fiber-Reinforced Epoxy Composites: Effect of Graphene Oxide Incorporation on Composites Performance

Harsh Sharma, AJAY KUMAR · 2022

Polymers

Sandwich-structured graphene oxide@poly (aminophenol-formaldehyde) sheets for improved mechanical and thermal properties of epoxy resin

Tao Sun, Hongyu Fan · 2021

Composites Science and Technology

A synergic effect of CNT/Al2O3 reinforcements on multiscale epoxy-based glass fiber composite: fabrication and molecular dynamics modeling

Davood Roustazadeh, Farshid Aghadavoudi · 2020

Molecular Simulation

Epoxy-Based Hybrid Structural Composites with Nanofillers: A Review

Sarath Sasidharan, Anoop Anand · 2020

Industrial & Engineering Chemis...

Functionally graded graphene reinforced composite structures: A review

Shaoyu Zhao, Zhan Zhao · 2020

Engineering Structures

Exfoliation level of aggregated graphitic nanoplatelets by oxidation followed by silanization on controlling mechanical and nanomechanical performance of hybrid CFRP composites

Nazrul Islam Khan, Sudipta Halder · 2019

Composites Part B: Engineering

Improved thermomechanical and electrical properties of reduced graphene oxide reinforced polyaniline – dodecylbenzenesulfonic acid/divinylbenzene nanocomposites

Abhishek K. Pathak, V. Kumar · 2019

Journal of Colloid and Interface Sc...

Metrics

449

Citations

62

References

Details

Published: Oct 01, 2016
Vol/Issue: 135
Pages: 28-38
License: View

Authors

Cite This Article

Abhishek K. Pathak, Munu Borah, Ashish Gupta, et al. (2016). Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites. Composites Science and Technology, 135, 28-38. https://doi.org/10.1016/j.compscitech.2016.09.007

Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites

You May Also Like