Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI and graphene oxide complex sizing at the interface

Junlin Chen; KAI WANG; Yan Zhao

doi:10.1016/j.compscitech.2017.11.005

journal article Jan 01, 2018

Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI and graphene oxide complex sizing at the interface

Junlin Chen

KAI WANG

Yan Zhao

Composites Science and Technology Vol. 154 pp. 175-186 · Elsevier BV

View at Publisher Save 10.1016/j.compscitech.2017.11.005

Topics

No keywords indexed for this article. Browse by subject →

References

66

[1]

Wong "Impact behavior of short and continuous fiber-reinforced polyester composites" J. Reinf. Plast. Compos (2010) 10.1177/0731684410375639

[2]

Vieille "About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic-and thermosetting-composites: a comparative study" Compos. Struct. (2013) 10.1016/j.compstruct.2013.01.025

[3]

Akonda "Recycled carbon fibre-reinforced polypropylene thermoplastic composites" Compos. Part A (2012) 10.1016/j.compositesa.2011.09.014

[4]

Markarian "Processing and recycling advantages drive growth in thermoplastic elastomers" Plast. Addit. Compd. (2004)

[5]

Guo "Effect of epoxy coatings on carbon fibers during manufacture of carbon fiber reinforced resin matrix composites" Mater. Des. (2010) 10.1016/j.matdes.2009.09.034

[6]

Sa "Surface modification of aramid fibers by bio-inspired poly (dopamine) and epoxy functionalized silane grafting" ACS Appl. Mater. Interfaces (2014) 10.1021/am507087p

[7]

Li "Interfacial studies on the O3 modified carbon fiber-reinforced polyamide 6 composites" Appl. Surf. Sci. (2008) 10.1016/j.apsusc.2008.08.013

[8]

Santos "Carbon fiber surface modification by plasma treatment for interface adhesion improvements of aerospace composites" Adv. Mater. Res. (2016) 10.4028/www.scientific.net/amr.1135.75

[9]

Lee "Design of microwave plasma and enhanced mechanical properties of thermoplastic composites reinforced with microwave plasma-treated carbon fiber fabric" Compos. Part B (2014) 10.1016/j.compositesb.2013.12.064

[10]

Li "Effect of Poly (phthalazinone ether ketone) with amino groups on the interfacial performance of carbon fibers reinforced PPBES resin" Compos. Sci. Technol. (2017) 10.1016/j.compscitech.2017.06.020

[11]

Sorrentino "Mechanical performance optimization through interface strength gradation in PP/glass fibre reinforced composites" Compos. Part B (2015) 10.1016/j.compositesb.2015.02.026

[12]

El-Sabbagh "Effect of coupling agent on natural fibre in natural fibre/polypropylene composites on mechanical and thermal behaviour" Compos. Part B (2014) 10.1016/j.compositesb.2013.09.047

[13]

Burn "The influence of coupling agent, fibre sizing and matrix degradation on the interfacial shear strength between carbon fibre and polypropylene" (2014)

[14]

Ming "The interlaminar shear strength and tribological properties of PA 6 composites filled with graphene oxide-treated carbon fiber" Surf. Interface Anal. (2017) 10.1002/sia.6219

[15]

Mudhukrishnan "Tool materials influence on surface roughness and oversize in machining glass fiber reinforced polypropylene (GFR-PP) composites" Mater. Manuf. Process (2016)

[16]

Haddad "Influence of machining process and machining induced surface roughness on mechanical properties of continuous fiber composites" Exp. Mech. (2015) 10.1007/s11340-014-9967-y

[17]

Díez-Pascual "Multiscale fiber-reinforced thermoplastic composites incorporating carbon nanotubes: A review" Solid State Mater. Sci. (2014) 10.1016/j.cossms.2013.06.003

[18]

Giraud "Preparation of aqueous dispersion of thermoplastic sizing agent for carbon fiber by emulsion/solvent evaporation" Appl. Surf. Sci. (2013) 10.1016/j.apsusc.2012.11.098

[19]

Duchoslav "Investigation on the thermo-oxidative stability of carbon fiber sizings for application in thermoplastic composites" Polym. Degrad. Stabil. (2016) 10.1016/j.polymdegradstab.2015.12.016

[20]

Li "Interfacial studies on the ozone and air-oxidation-modified carbon fiber reinforced PEEK composites" Surf. Interface Anal. (2009) 10.1002/sia.3023

[21]

WenBo "Interfacial shear strength in carbon fiber-reinforced poly (phthalazinone ether ketone) composites" Polym. Compos (2013) 10.1002/pc.22599

[22]

Chuang "Effect of polyamic acids on interfacial shear strength in carbon fiber/aromatic thermoplastics" J. Appl. Polym. Sci. (1990) 10.1002/app.1990.070410129

[23]

Yuan "Improved interfacial adhesion in carbon fiber/polyether sulfone composites through an organic solvent-free polyamic acid sizing" Appl. Surf. Sci. (2013) 10.1016/j.apsusc.2013.04.085

[24]

Li "One-step functionalization of carbon fiber using in situ generated aromatic diazonium salts to enhance adhesion with PPBES resins" RSC Adv. (2016) 10.1039/c6ra12717g

[25]

Li "Amino-terminated nitrogen-rich layer to improve the interlaminar shear strength between carbon fiber and a thermoplastic matrix" Compos. Part A (2017) 10.1016/j.compositesa.2017.06.023

[26]

Lee "Glass transition temperatures and rigid amorphous fraction of poly(ether ether ketone) and poly(ether imide) blends" Polymer (1997) 10.1016/s0032-3861(97)85599-1

[27]

Yoo "Tribological behavior of blends of polyether ether ketone and polyether imide" Wear (1993)

[28]

Giraud "Influence of new thermoplastic sizing agents on the mechanical behavior of poly (ether ketone ketone)/carbon fiber composites" J. Appl. Polym. Sci. (2015) 10.1002/app.42550

[29]

Patterson "Enhanced Interfacial Strength and UV Shielding of Aramid Fiber Composites through ZnO Nanoparticle Sizing" ACS Appl. Mater. Interfaces (2016) 10.1021/acsami.6b07555

[30]

Yu "Enhanced interphase between epoxy matrix and carbon fiber with carbon nanotube-modified silane coating" Compos. Sci. Technol. (2014) 10.1016/j.compscitech.2014.05.021

[31]

Zhang "Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide" ACS Appl. Mater. Interfaces (2012) 10.1021/am201757v

[32]

George "A review on interface modification and characterization of natural fiber reinforced plastic composites" Polym. Eng. Sci. (2001) 10.1002/pen.10846

[33]

Zhandarov "Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters" Compos. Sci. Technol. (2005) 10.1016/j.compscitech.2004.07.003

[34]

Yang "Interface strength in glass fibre–polypropylene measured using the fibre pull-out and microbond methods" Compos. Part A (2010) 10.1016/j.compositesa.2009.10.005

[35]

Liu "Interfacial shear strength of carbon fiber reinforced polyphenylene sulfide measured by the microbond test" Polym. Test. (2013) 10.1016/j.polymertesting.2013.03.020

[36]

Yu "Long-term moisture effects on the interfacial shear strength between surface treated carbon fiber and epoxy matrix" Compos. Part A (2015) 10.1016/j.compositesa.2015.08.027

[37]

Wang "Preparation of Ni-reduced graphene oxide nanocomposites by Pd-activated electroless deposition and their magnetic properties" Appl. Surf. Sci. (2012) 10.1016/j.apsusc.2012.05.058

[38]

Liu "Diazonium functionalization of graphene nanosheets and impact response of aniline modified graphene/bismaleimide nanocomposites" Mater. Des. (2014) 10.1016/j.matdes.2013.07.027

[39]

Yang "A new approach to reduced graphite oxide with tetrathiafulvalene in the presence of metal ions" J. Mater. Chem. (2012) 10.1039/c2jm15556g

[40]

Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide

Sasha Stankovich, Dmitriy A. Dikin, Richard D. Piner et al.

Carbon 2007 10.1016/j.carbon.2007.02.034

[41]

Chen "Preparation of graphene by the rapid and mild thermal reduction of graphene oxide induced by microwaves" Carbon (2010) 10.1016/j.carbon.2009.11.037

[42]

Zhang "Graphene/carbon aerogels derived from graphene crosslinked polyimide as electrode materials for supercapacitors" RSC Adv. (2015) 10.1039/c4ra13015d

[43]

Park "Colloidal Suspensions of Highly Reduced Graphene Oxide in a Wide Variety of Organic Solvents" Nano Lett. (2009) 10.1021/nl803798y

[44]

Zheng "In-situ pull-off of ZnO nanowire from carbon fiber and improvement of interlaminar toughness of hierarchical ZnO nanowire/carbon fiber hydrid composite laminates" Carbon (2016) 10.1016/j.carbon.2016.09.002

[45]

Kumar "Study on mechanical, morphological and electrical properties of carbon nanofiber/polyetherimide composites" Mater. Sci. Eng. B (2007) 10.1016/j.mseb.2007.06.002

[46]

Park "Interfacial adhesion and microfailure modes of electrodeposited carbon fiber/epoxy–PEI composites by microdroplet and surface wettability tests" J. Colloid Interf. Sci. (2002) 10.1006/jcis.2002.8252

[47]

Lustiger "Morphological aspects of the interface in the PEEK-carbon fiber system" Polym. Compos (1992) 10.1002/pc.750130511

[48]

Rafiq "Increasing the toughness of nylon 12 by the incorporation of functionalized graphene" Carbon (2010) 10.1016/j.carbon.2010.07.043

[49]

Keusch "Influence of surface treatment of glass fibres on the dynamic mechanical properties of epoxy resin composites" Compos. Part A (1999) 10.1016/s1359-835x(99)00007-x

[50]

Afaghi-Khatibi "Characterisation of fibre/matrix interfacial degradation under cyclic fatigue loading using dynamic mechanical analysis" Compos. Part A (2002) 10.1016/s1359-835x(02)00117-3

Showing 50 of 66 references

Cited By

269

A simplified methodology for assessing the interface of CFRPs with fibre push-out testing

Dimitrios Gaitanelis, Craig J. Williams · 2025

Composites Part A: Applied Science...

Material performance, manufacturing methods, and engineering applications in aviation of carbon fiber reinforced polymers: A comprehensive review

Gongqiu Peng, Baoyan Zhang · 2025

Thin-Walled Structures

Study the application of polydopamine preparation technology in the interface modification of phthalonitrile composite

Rui Chen, Jiqiang Hu · 2024

Composites Communications

Recent advances of interphases in carbon fiber-reinforced polymer composites: A review

Hao Zheng, Wenjian Zhang · 2022

Composites Part B: Engineering

Mechanical performance and bioactivation of 3D-printed PEEK for high-performance implant manufacture: a review

Pedro Rendas, Lígia Figueiredo · 2022

Progress in Biomaterials

Effect of Sizing Agents on Surface Properties of Carbon Fibers and Interfacial Adhesion of Carbon Fiber/Bismaleimide Composites

Tian Yang, Yan Zhao · 2021

ACS Omega

PAI/MXene sizing-based dual functional coating for carbon fiber/PEEK composite

Xueyu Yuan, Jing Jiang · 2021

Composites Science and Technology

Effects of crystallinity control on mechanical properties of 3D-printed short-carbon-fiber-reinforced polyether ether ketone composites

Dong Yang, Yi Cao · 2021

Polymer Testing

Effects of polyetherimide sizing involving carbon nanotubes on interfacial performance of carbon fiber/polyetheretherketone composites

Hansong Liu, Yan Zhao · 2021

Polymers for Advanced Technologies

Strong Interface Construction of Carbon Fiber–reinforced PEEK Composites: An Efficient Method for Modifying Carbon Fiber with Crystalline PEEK

Yanchao Yang, Tianjiao Wang · 2020

Macromolecular Rapid Communications

Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism

Wei Zhao, Yongxiang Li · 2019

Polymers

Metrics

269

Citations

66

References

Details

Published: Jan 01, 2018
Vol/Issue: 154
Pages: 175-186
License: View

Authors

Department of Biomedical Informatics, Columbia University, 475 Riverside Dr., Mail Code 7717, New York, NY 10115, USA

Y

Yan Zhao

Harbin Normal University

Funding

Beijing Institute of Collaborative Innovation

Cite This Article

Junlin Chen, KAI WANG, Yan Zhao (2018). Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI and graphene oxide complex sizing at the interface. Composites Science and Technology, 154, 175-186. https://doi.org/10.1016/j.compscitech.2017.11.005

Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI and graphene oxide complex sizing at the interface

You May Also Like