Compressive properties and micro-structural characteristics of Ti–6Al–4V fabricated by electron beam melting and selective laser melting

Lijun Xiao; Weidong Song; Menglei Hu

doi:10.1016/j.msea.2019.138204

journal article Sep 01, 2019

Compressive properties and micro-structural characteristics of Ti–6Al–4V fabricated by electron beam melting and selective laser melting

Lijun Xiao

Weidong Song

Menglei Hu

Materials Science and Engineering: A Vol. 764 pp. 138204 · Elsevier BV

View at Publisher Save 10.1016/j.msea.2019.138204

Topics

No keywords indexed for this article. Browse by subject →

References

52

[1]

Boyer

[2]

Majorell "Mechanical behavior of Ti-6Al-4V at high and moderate temperatures-Part I: experimental results" Mater. Sci. Eng. A (2002) 10.1016/s0921-5093(01)01507-6

[3]

Rhodes "Formation characteristics of the α/β interface phase in Ti-6Al-4V" Metall. Trans. A (1979) 10.1007/bf02817630

[4]

Rafi "Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting" J. Mater. Eng. Perform. (2013) 10.1007/s11665-013-0658-0

[5]

Kruth "Consolidation phenomena in laser and powder-bed based layered manufacturing" CIRP Ann. - Manuf. Technol. (2007) 10.1016/j.cirp.2007.10.004

[6]

Murr "Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications" J. Mech. Behav. Biomed. Mater. (2009) 10.1016/j.jmbbm.2008.05.004

[7]

A study of the microstructural evolution during selective laser melting of Ti–6Al–4V

Lore Thijs, Frederik Verhaeghe, Tom Craeghs et al.

Acta Materialia 2010 10.1016/j.actamat.2010.02.004

[8]

Facchini "Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders" Rapid Prototyp. J. (2010) 10.1108/13552541011083371

[9]

Attar "Manufacture by selective laser melting and mechanical behavior of commercially pure titanium" Mater. Sci. Eng. A (2014) 10.1016/j.msea.2013.11.038

[10]

Chlebus "Microstructure and mechanical behaviour of Ti-6Al-7Nb alloy produced by selective laser melting" Mater. Char. (2011) 10.1016/j.matchar.2011.03.006

[11]

Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V

M. Simonelli, Y.Y. Tse, C. Tuck

Materials Science and Engineering: A 2014 10.1016/j.msea.2014.07.086

[12]

Khorasani "The effect of SLM process parameters on density, hardness, tensile strength and surface quality of Ti-6Al-4V" Addit. Manuf. (2019)

[13]

Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties

Bey Vrancken, Lore Thijs, Jean-Pierre Kruth et al.

Journal of Alloys and Compounds 2012 10.1016/j.jallcom.2012.07.022

[14]

Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V

Chunlei Qiu, Nicholas J.E. Adkins, Moataz M. Attallah

Materials Science and Engineering: A 2013 10.1016/j.msea.2013.04.099

[15]

Yang "Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting" Mater. Des. (2016) 10.1016/j.matdes.2016.06.117

[16]

Zäh "Modelling and simulation of electron beam melting" Prod. Eng. (2010) 10.1007/s11740-009-0197-6

[17]

Hrabe "Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti-6Al-4V) fabricated using electron beam melting (EBM), Part 1: distance from build plate and part size" Mater. Sci. Eng. A (2013) 10.1016/j.msea.2013.02.064

[18]

Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location

Nikolas Hrabe, Timothy Quinn

Materials Science and Engineering: A 2013 10.1016/j.msea.2013.02.065

[19]

Al-Bermani "The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V" Metall. Mater. Trans. A Phys. Metall. Mater. Sci. (2010) 10.1007/s11661-010-0397-x

[20]

Graded microstructure and mechanical properties of additive manufactured Ti–6Al–4V via electron beam melting

Xipeng Tan, Yihong Kok, Yu Jun Tan et al.

Acta Materialia 2015 10.1016/j.actamat.2015.06.036

[21]

Murr "Microstructures and mechanical properties of electron beam-rapid manufactured Ti-6Al-4V biomedical prototypes compared to wrought Ti-6Al-4V" Mater. Char. (2009) 10.1016/j.matchar.2008.07.006

[22]

Lu "Massive transformation in Ti-6Al-4V additively manufactured by selective electron beam melting" Acta Mater. (2016) 10.1016/j.actamat.2015.11.011

[23]

Formanoir "Electron beam melted Ti–6Al–4V: microstructure, texture and mechanical behavior of the as-built and heat-treated material" Mater. Sci. Eng. A (2016) 10.1016/j.msea.2015.11.052

[24]

Formanoir "Improving the mechanical efficiency of electron beam melted titanium lattice structures by chemical etching" Addit. Manuf. (2016)

[25]

Lhuissier "Geometrical control of lattice structures produced by EBM through chemical etching: investigations at the scale of individual struts" Mater. Des. (2016) 10.1016/j.matdes.2016.08.029

[26]

Mines "Drop weight impact behaviour of sandwich panels with metallic micro lattice cores" Int. J. Impact Eng. (2013) 10.1016/j.ijimpeng.2013.04.007

[27]

Sallica-Leva "Microstructure and mechanical behavior of porous Ti-6Al-4V parts obtained by selective laser melting" J. Mech. Behav. Biomed. Mater. (2013) 10.1016/j.jmbbm.2013.05.011

[28]

Tancogne-Dejean "Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading" Acta Mater. (2016) 10.1016/j.actamat.2016.05.054

[29]

Li "Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting" Acta Mater. (2012) 10.1016/j.actamat.2011.10.051

[30]

Cheng "Compression deformation behavior of Ti-6Al-4V alloy with cellular structures fabricated by electron beam melting" J. Mech. Behav. Biomed. Mater. (2012) 10.1016/j.jmbbm.2012.10.005

[31]

Li "Influence of cell shape on mechanical properties of Ti-6Al-4V meshes fabricated by electron beam melting method" Acta Biomater. (2014) 10.1016/j.actbio.2014.06.010

[32]

Li "Functionally graded Ti-6Al-4V meshes with high strength and energy absorption" Adv. Eng. Mater. (2016) 10.1002/adem.201500086

[33]

Xiao "Mechanical behavior of open-cell rhombic dodecahedron Ti-6Al-4V lattice structure" Mater. Sci. Eng. A (2015) 10.1016/j.msea.2015.06.018

[34]

Xiao "Mechanical properties of open-cell rhombic dodecahedron titanium alloy lattice structure manufactured using electron beam melting under dynamic loading" Int. J. Impact Eng. (2017) 10.1016/j.ijimpeng.2016.10.006

[35]

Xiao "Additively-manufactured functionally graded Ti-6Al-4V lattice structures with high strength under static and dynamic loading: Experiments" Int. J. Impact Eng. (2018) 10.1016/j.ijimpeng.2017.09.018

[36]

Parthasarathy "Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)" J. Mech. Behav. Biomed. Mater. (2010) 10.1016/j.jmbbm.2009.10.006

[37]

Gaytan "Comparison of microstructures and mechanical properties for solid and mesh cobalt-base alloy prototypes fabricated by electron beam melting" Metall. Mater. Trans. A (2010) 10.1007/s11661-010-0388-y

[38]

The Deformation and Ageing of Mild Steel: III Discussion of Results

E O Hall

Proceedings of the Physical Society. Section B 1951 10.1088/0370-1301/64/9/303

[39]

Petch "The cleavage strength of polycrystals" J. Iron Steel Inst. (1982)

[40]

Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition

W. XU, M. Brandt, S. Sun et al.

Acta Materialia 2015 10.1016/j.actamat.2014.11.028

[41]

Baufeld "Texture and crystal orientation in Ti-6Al-4V builds fabricated by shaped metal deposition" Metall. Mater. Trans. A (2010) 10.1007/s11661-010-0255-x

[42]

As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting

T. Vilaro, C. Colin, J. D. Bartout

Metallurgical and Materials Transactions A 2011 10.1007/s11661-011-0731-y

[43]

Murr "Next generation orthopaedic implants by additive manufacturing using electron beam melting" Int. J. Biom. (2012)

[44]

ASM International (1991)

[45]

Blackburn "A comparison of phase transformations in three commercial titanium alloys (Phase transformations in commercial titanium alloys compared for mechanical properties, emphasizing decomposition of metastable beta phases on quenching, aging or deformation)" ASM Trans. Q. (1967)

[46]

Fopiano "Phase transformations during the heat treatment of the Alloy Ti-6AI-4V" Trans. ASM (1969)

[47]

Valiev "Paradox of strength and ductility in metals processed by severe plastic deformation" J. Mater. Res. (2002) 10.1557/jmr.2002.0002

[48]

Liu "Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting" J. Mech. Phys. Solids (2017) 10.1016/j.jmps.2017.07.003

[49]

Wang "Effects of part size on microstructure and mechanical properties of Ti-6Al-4V alloy fabricated by Electron Beam Melting" Rare Metal Mater. Eng. (2014)

[50]

Ran "High-strain-rate plastic deformation and fracture behaviour of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy at room temperature" Mech. Mater. (2018) 10.1016/j.mechmat.2017.08.007

Showing 50 of 52 references

Cited By

84

Design and Optimization of Lattice Structures: A Review

Chen Pan, Yafeng Han · 2020

Applied Sciences

Metrics

84

Citations

52

References

Details

Published: Sep 01, 2019
Vol/Issue: 764
Pages: 138204
License: View

Authors

Funding

National Natural Science Foundation of China Award: 11672043

China Postdoctoral Science Foundation Award: 2018M640072

State Key Laboratory of Explosion Science and Technology Award: YBKT18-07

Cite This Article

Lijun Xiao, Weidong Song, Menglei Hu (2019). Compressive properties and micro-structural characteristics of Ti–6Al–4V fabricated by electron beam melting and selective laser melting. Materials Science and Engineering: A, 764, 138204. https://doi.org/10.1016/j.msea.2019.138204

Compressive properties and micro-structural characteristics of Ti–6Al–4V fabricated by electron beam melting and selective laser melting

You May Also Like