journal article Open Access May 06, 2019

Superwetting Polymeric Three Dimensional (3D) Porous Materials for Oil/Water Separation: A Review

Polymers Vol. 11 No. 5 pp. 806 · MDPI AG
View at Publisher Save 10.3390/polym11050806
Abstract
Oil spills and the emission of oily wastewater have triggered serious water pollution and environment problems. Effectively separating oil and water is a world-wide challenge and extensive efforts have been made to solve this issue. Interfacial super-wetting separation materials e.g., sponge, foams, and aerogels with high porosity tunable pore structures, are regarded as effective media to selectively remove oil and water. This review article reports the latest progress of polymeric three dimensional porous materials (3D-PMs) with super wettability to separate oil/water mixtures. The theories on developing super-wetting porous surfaces and the effects of wettability on oil/water separation have been discussed. The typical 3D porous structures (e.g., sponge, foam, and aerogel), commonly used polymers, and the most reported techniques involved in developing desired porous networks have been reviewed. The performances of 3D-PMs such as oil/water separation efficiency, elasticity, and mechanical stability are discussed. Additionally, the current challenges in the fabrication and long-term operation of super-wetting 3D-PMs in oil/water separation have also been introduced.
Topics

No keywords indexed for this article. Browse by subject →

References
206
[1]
Ge "Pumping through porous hydrophobic/oleophilic materials: An alternative technology for oil spill remediation" Angew. Chem. Int. Ed. (2014) 10.1002/anie.201310151
[2]
Singh "Cross-Flow Microfiltration of Industrial Oily Wastewater: Experimental and Theoretical Consideration" Sep. Sci. Technol. (2011) 10.1080/01496395.2011.560917
[3]
Yong "Oil/water separation based on natural materials with super-wettability: Recent advances" Phys. Chem. Chem. Phys. (2018) 10.1039/c8cp04009e
[4]
Yu "Superhydrophobic and Superoleophilic Porous Boron Nitride Nanosheet/Polyvinylidene Fluoride Composite Material for Oil-Polluted Water Cleanup" Adv. Mater. Interfaces (2015) 10.1002/admi.201400267
[5]
Separation of oil/water emulsions using nano MgO anchored hybrid ultrafiltration membranes for environmental abatement

Thanigaivelan Arumugham, Noel Jacob Kaleekkal, Dipak Rana et al.

Journal of Applied Polymer Science 10.1002/app.42848
[6]
Peng "Recent advances in biomimetic thin membranes applied in emulsified oil/water separation" J. Mater. Chem. A (2016) 10.1039/c6ta06922c
[7]
(2019, March 14). Available online: https://en.wikipedia.org/wiki/Deepwater_Horizon_oil_spill.
[8]
Schrope "Oil spill: Deep wounds" Nature (2011) 10.1038/472152a
[9]
(2019, March 14). Available online: https://en.wikipedia.org/wiki/2011_Bohai_Bay_oil_spill.
[10]
(2019, April 12). Available online: https://commons.wikimedia.org/wiki/File:Defense.gov_photo_essay_100506-N-6436W-023.jpg.
[11]
(2019, April 12). Available online: http://www.discovery.com/dscovrd/wildlife/five-years-later-gulf-coast-wildlife-still-reeling-f rom-deepwater-horizon-spill/.
[12]
(2019, April 12). Available online: https://commons.wikimedia.org/wiki/File:Oiled_Pelicans.jpg.
[13]
(2019, April 12). Available online: https://commons.wikimedia.org/wiki/File:Defense.gov_photo_essay_100506-N-6070S-819.jpg?uselang=en.
[14]
Hanafy "Treatment of Oily Wastewater Using Dissolved Air Flotation Technique" Energy Sources (2007) 10.1080/009083190948711
[15]
Kwon "Investigation of water separation from water-in-oil emulsion using electric field" J. Ind. Eng. Chem. (2010) 10.1016/j.jiec.2010.07.018
[16]
Recent developments in photocatalytic water treatment technology: A review

Meng Nan Chong, Bo Jin, Christopher W.K. Chow et al.

Water Research 2010 10.1016/j.watres.2010.02.039
[17]
Kwon "On-Demand Separation of Oil–water Mixtures" Adv. Mater. (2012) 10.1002/adma.201201364
[18]
Padaki "Membrane technology enhancement in oil–water separation. A review" Desalination (2015) 10.1016/j.desal.2014.11.023
[19]
Chakrabarty "Ultrafiltration of stable oil-in-water emulsion by polysulfone membrane" J. Membr. Sci. (2008) 10.1016/j.memsci.2008.08.007
[20]
Yang "A review on chitosan-based flocculants and their applications in water treatment" Water Res. (2016) 10.1016/j.watres.2016.02.068
[21]
Arnaud, J. (2005). Methods And apparatus for Oil Demulsification and Separation of Oil and Suspended Solids from Produced Water. (6,875,351), U.S. Patent.
[22]
Bayat "Oil Spill Cleanup from Sea Water by Sorbent Materials" Chem. Eng. Technol. (2005) 10.1002/ceat.200407083
[23]
Rajakovic "Efficiency of oil removal from real wastewater with different sorbent materials" J. Hazard. Mater. (2007) 10.1016/j.jhazmat.2006.09.060
[24]
Rivas "Supercritical Water Oxidation of Olive Oil Mill Wastewater" Ind. Eng. Chem. Res. (2001) 10.1021/ie000995u
[25]
Scott "Integration of chemical and biological oxidation processes for water treatment: Review and recommendations" Environ. Prog. (1995) 10.1002/ep.670140212
[26]
Xin "In-situ ultrafast separation and purification of oil/water emulsions by superwetting TiO2 nanocluster-based mesh" Nanoscale (2016) 10.1039/c6nr01119e
[27]
Chakrabarty "Preparation, characterization and performance studies of polysulfone membranes using PVP as an additive" J. Membr. Sci. (2008) 10.1016/j.memsci.2008.02.027
[28]
Lobo "Ultrafiltration of oil-in-water emulsions with ceramic membranes: Influence of pH and crossflow velocity" J. Membr. Sci. (2006) 10.1016/j.memsci.2005.11.016
[29]
Super‐Hydrophobic Surfaces: From Natural to Artificial

L. Feng, S. Li, H. Li et al.

Advanced Materials 2002 10.1002/adma.200290020
[30]
Liu "Bioinspired Design of a Superoleophobic and Low Adhesive Water/Solid Interface" Adv. Mater. (2009) 10.1002/adma.200801782
[31]
Purity of the sacred lotus, or escape from contamination in biological surfaces

W. Barthlott, C. Neinhuis

Planta 1997 10.1007/s004250050096
[32]
Pan, Z., Cheng, F., and Zhao, B. (2017). Bio-Inspired Polymeric Structures with Special Wettability and Their Applications: An Overview. Polymers, 9. 10.3390/polym9120725
[33]
Feng "Design and creation of superwetting/antiwetting surfaces" Adv. Mater. (2010) 10.1002/adma.200501961
[34]
Liu "Mechanisms of superhydrophobicity on hydrophilic substrates" J. Phys. Condens. Matter (2007) 10.1088/0953-8984/19/35/356002
[35]
Feng "A Super-Hydrophobic and Super-Oleophilic Coating Mesh Film for the Separation of Oil and Water" Angew. Chem. Int. Ed. (2004) 10.1002/anie.200353381
[36]
Xue "A novel superhydrophilic and underwater superoleophobic hydrogel-coated mesh for oil/water separation" Adv. Mater. (2011) 10.1002/adma.201102616
[37]
Dunderdale "Programmable Oil/Water Separation Meshes: Water or Oil Selectivity Using Contact Angle Hysteresis" Macromol. Mater. Eng. (2016) 10.1002/mame.201600061
[38]
Sun "Superhydrophobic Shish-kebab Membrane with Self-Cleaning and Oil/Water Separation Properties" ACS Sustain. Chem. Eng. (2018) 10.1021/acssuschemeng.8b01047
[39]
Wei "Simplified and robust adhesive-free superhydrophobic SiO2-decorated PVDF membranes for efficient oil/water separation" J. Membr. Sci. (2018) 10.1016/j.memsci.2018.03.058
[40]
Dunderdale "Continuous, High-Speed, and Efficient Oil/Water Separation using Meshes with Antagonistic Wetting Properties" ACS Appl. Mater. Interfaces (2015) 10.1021/acsami.5b06207
[41]
Wang "A novel 3D porous modified material with cage-like structure: Fabrication and its demulsification effect for efficient oil/water separation" J. Mater. Chem. A (2017) 10.1039/c6ta10248d
[42]
Cao "Fabrication of robust surfaces with special wettability on porous copper substrates for various oil/water separations" Chem. Eng. J. (2018) 10.1016/j.cej.2018.04.146
[43]
Hu "Facile preparation of superhydrophobic metal foam for durable and high efficient continuous oil–water separation" Chem. Eng. J. (2017) 10.1016/j.cej.2017.04.034
[44]
Luo "Fluorine-Induced Superhydrophilic Ti Foam with Surface Nanocavities for Effective Oil-in-Water Emulsion Separation" Ind. Eng. Chem. Res. (2017) 10.1021/acs.iecr.6b04059
[45]
Luo "Hierarchical nanoparticle-induced superhydrophilic and under-water superoleophobic Cu foam with ultrahigh water permeability for effective oil/water separation" J. Mater. Chem. A (2016) 10.1039/c6ta04487e
[46]
Zhou "Facile Fabrication of Superhydrophobic Sponge with Selective Absorption and Collection of Oil from Water" Ind. Eng. Chem. Res. (2013) 10.1021/ie400942t
[47]
Chung "Superhydrophobic Melamine Sponge Modified by Cross-Linked Urea Network as Recyclable Oil Absorbent Materials" Ind. Eng. Chem. Res. (2018) 10.1021/acs.iecr.8b01595
[48]
Zhou "Design of Recyclable Superhydrophobic PU@Fe3O4@PS Sponge for Removing Oily Contaminants from Water" Ind. Eng. Chem. Res. (2019) 10.1021/acs.iecr.8b04642
[49]
Xiong "One-Step Synthesis of Carbon-Hybridized ZnO on Polymeric Foams by Atomic Layer Deposition for Efficient Absorption of Oils from Water" Ind. Eng. Chem. Res. (2018) 10.1021/acs.iecr.7b03939
[50]
Kakhramanly "Mechanism of Crude Oil and Petroleum-Product Sorption from Water Surfaces by Random Polypropylene Based Polymer Foam Sorbents" Chem. Technol. Fuels Oils (2014) 10.1007/s10553-014-0482-8

Showing 50 of 206 references

Related

You May Also Like

Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier

Hirenkumar K. Makadia, Steven J. Siegel · 2011

3,980 citations

Chitosan: An Overview of Its Properties and Applications

Inmaculada Aranaz, Andrés R. Alcántara · 2021

1,433 citations

Thermoresponsive Polymers for Biomedical Applications

Mark A. Ward, Theoni K. Georgiou · 2011

1,048 citations