journal article Open Access Sep 17, 2021

Preparation and Corrosion Performance of PPy/Silane Film on AZ31 Magnesium Alloy via One-Step Cyclic Voltammetry

Polymers Vol. 13 No. 18 pp. 3148 · MDPI AG
View at Publisher Save 10.3390/polym13183148
Abstract
PPy/silane composite film on a magnesium alloy surface was prepared by one-step cycle voltammetry. The mixed solution of methanol and water was used as the hydrolysis solvent of a γ-(2,3-glycidoxypropyl) trimethoxysilane coupling agent (KH-560). The surface morphology of the PPy/silane film, the electro-polymerization progress of KH-560 and PPy, the influence of the silane coupling agent and the corrosion behavior of the coated AZ31 Mg alloy were all investigated. The results indicated that the PPy/silane film on AZ31 Mg alloy via one-step cyclic voltammetry could provide better corrosion protection for an Mg alloy when the volume fraction of KH-560 in the hydrolysis solution was 15% and the time span of hydrolysis was 24 h with the 5.935 × 10−10 A cm−2 corrosion current density.
Topics

No keywords indexed for this article. Browse by subject →

References
31
[1]
Asif "Hydrothermal deposition of high strength calcium phosphate coatings on magnesium alloy for biomedical applications" Surf. Coat. Technol. (2019) 10.1016/j.surfcoat.2018.09.016
[2]
Chuayan "Comparison of calcium phosphate coatings on AZ31 and fluoride-treated AZ31 alloy prepared by hydrothermal method and their electrochemical corrosion behaviour" Mater. Chem. Phys. (2018) 10.1016/j.matchemphys.2018.08.085
[3]
Lingyu "Advances in functionalized polymer coatings on biodegradable magnesium alloys—A review" Acta Biomater. (2018) 10.1016/j.actbio.2018.08.030
[4]
Rita "Mechanical, tribological and anti-corrosive properties of polyaniline/graphene coated Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn alloys" J. Mater. Sci. Technol. (2019) 10.1016/j.jmst.2019.03.028
[5]
Xingguo "The influence of hydrofluoric acid doped polyaniline on the protective performance of a mg-rich epoxy coating on AZ91D magnesium alloy" Prog. Org. Coat. (2020) 10.1016/j.porgcoat.2020.105550
[6]
Jothi "Enhancing the biodegradability and surface protective performance of AZ31 Mg alloy using polypyrrole/gelatin composite coatings with anodized Mg surface" Surf. Coat. Technol. (2020) 10.1016/j.surfcoat.2019.125139
[7]
"Structure, morphology and corrosion resistance of Ni-Mo plus PTh composite coatings" Bull. Mater. Sci. (2015) 10.1007/s12034-015-0922-z
[8]
Maryam "Electrochemical behavior of polypyrrole-coated AZ31 alloymodified by fluoride anions" J. Solid State Electrochem. (2017) 10.1007/s10008-016-3422-1
[9]
Martinez "Immobilization of Zn species in a polypyrrole matrix to prevent corrosion and microbial growth on Ti-6Al-4V alloy for biomedical applications" Prog. Org. Coat. (2020) 10.1016/j.porgcoat.2020.105650
[10]
Ascencio "Corrosion behaviour of polypyrrole-coated WE43 Mg alloy in a modifiedsimulated body fluid solution" Corros. Sci. (2018) 10.1016/j.corsci.2018.01.044
[11]
Bhattacharya "Preparation, characterization and performance of conducting polypyrrole composites based on polysulfone" Desalination (2008) 10.1016/j.desal.2006.07.018
[12]
Oscar "Polypyrrole Films Deposited on Carbon-Steel CS-1018 and Its Interaction with Mexican Crude Oil" Int. J. Electrochem. Sci. (2015) 10.1016/s1452-3981(23)06726-3
[13]
Metehan "Electrochemical polymerization and characterization of polypyrrole on Mg–Al alloy (AZ91D)" Synth. Met. (2011) 10.1016/j.synthmet.2010.11.048
[14]
Srinivasan "Electrochemical polymerization of pyrrole over AZ31 Mg alloy for biomedical applications" Electrochim. Acta (2013) 10.1016/j.electacta.2012.10.087
[15]
Mei "Electro-assisted preparation of dodecyltrimethoxysilane/TiO2 composite films for corrosion protection of AA2024-T3 (aluminum alloy)" Electrochim. Acta (2010) 10.1016/j.electacta.2009.12.081
[16]
Xueming "Studies of the Preparation of KH-560 Silane Films on Metallic Surface" Chin. Surf. Eng. (2004)
[17]
Franquet "Effect of bath concentration and curing time on the structure of non-functional thin organosilane layers on aluminium" Electrochim. Acta (2003) 10.1016/s0013-4686(02)00832-0
[18]
Eun "Preparation of Gelatin-assisted Polypyrrole–Poly (3,4-ethylenedioxythiophene) Composites" Bull. Korean Chem. Soc. (2016) 10.1002/bkcs.10977
[19]
Guoli "Fabrication and adhesive properties of thin organosilane films coated on low carbon steel substrates" Surf. Coat. Technol. (2007) 10.1016/j.surfcoat.2007.04.032
[20]
Xueming "Influence of thermal curing on the fabrication and properties of thin organosilane films coated on low carbon steel substrates" J. Mater. Process. Technol. (2007) 10.1016/j.jmatprotec.2006.12.042
[21]
Riegel "Kinetic investigations of hydrolysis and condensation of the glycidoxypropyltrimethoxysilaner/aminopropyltriethoxy-silane system by means of FT-Raman spectroscopy I" J. Non-Cryst. Solids (1998) 10.1016/s0022-3093(97)00487-0
[22]
Turhan "Optimization of electrochemical polymerization parameters of polypyrrole on Mg–Al alloy (AZ91D) electrodes and corrosion performance" Electrochim. Acta (2011) 10.1016/j.electacta.2011.03.120
[23]
Jaouhari "Comparison study between corrosion protection of polypyrrole synthesized on stainless steel from phthalate and saccharinate aqueous medium" Polym. Test. (2018) 10.1016/j.polymertesting.2018.03.022
[24]
Qi "Investigation of the anticorrosion properties of graphene oxide doped thin organic anticorrosion films for hot-dip galvanized steel" Appl. Surf. Sci. (2019) 10.1016/j.apsusc.2019.02.199
[25]
Chen "Preparation and anti-corrosion performance of superhydrophobic silane/graphene oxide composite coating on copper" Surf. Coat. Technol. (2021) 10.1016/j.surfcoat.2021.127622
[26]
Sougueh "Influence of pre-grafted pyrrole-based silane on the electrodeposition and chemical properties of polypyrrole films" Synth. Met. (2018) 10.1016/j.synthmet.2018.10.017
[27]
Colucci "Electrochemical oxidation potential of photocatalyst reducing agents" Electrochim. Acta (1999) 10.1016/s0013-4686(98)00358-2
[28]
Petitjean "Ultra-fast electropolymerization of pyrrole in aqueous media on oxidizable metals in a one-step process" J. Electroanal. Chem. (1999) 10.1016/s0022-0728(99)00418-0
[29]
Saidman "Electrosynthesis of hollow polypyrrole microtubes with a rectangular cross-section" Electrochem. Commun. (2011) 10.1016/j.elecom.2011.02.037
[30]
Xuejun "Fabrication and corrosion resistance of a hydrophobic micro-arc oxidation coating on AZ31 Mg alloy" Corros. Sci. (2015) 10.1016/j.corsci.2014.10.041
[31]
Chengdong "Insight into the anti-corrosion performance of electrodeposited silane/nano-CeO2 film on carbon steel" Surf. Coat. Technol. (2017) 10.1016/j.surfcoat.2017.06.031
Related

You May Also Like

Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier

Hirenkumar K. Makadia, Steven J. Siegel · 2011

3,980 citations

Chitosan: An Overview of Its Properties and Applications

Inmaculada Aranaz, Andrés R. Alcántara · 2021

1,433 citations

Thermoresponsive Polymers for Biomedical Applications

Mark A. Ward, Theoni K. Georgiou · 2011

1,048 citations