journal article
Open Access
Oct 14, 2021
Design, Development, and Characterization of Advanced Textile Structural Hollow Composites
Abstract
The research is focused on the design and development of woven textile-based structural hollow composites. E-Glass and high tenacity polyester multifilament yarns were used to produce various woven constructions. Yarn produced from cotton shoddy (fibers extracted from waste textiles) was used to develop hybrid preforms. In this study, unidirectional (UD), two-dimensional (2D), and three-dimensional (3D) fabric preforms were designed and developed. Further, 3D woven spacer fabric preforms with single-layer woven cross-links having four different geometrical shapes were produced. The performance of the woven cross-linked spacer structure was compared with the sandwich structure connected with the core pile yarns (SPY). Furthermore, three different types of cotton shoddy yarn-based fabric structures were developed. The first is unidirectional (UD), the second is 2D all-waste cotton fabric, and the third is a 2D hybrid fabric with waste cotton yarn in the warp and glass multifilament yarn in the weft. The UD, 2D, and 3D woven fabric-reinforced composites were produced using the vacuum-assisted resin infusion technique. The spacer woven structures were converted to composites by inserting wooden blocks with an appropriate size and wrapped with a Teflon sheet into the hollow space before resin application. A vacuum-assisted resin infusion technique was used to produce spacer woven composites. While changing the reinforcement from chopped fibers to 3D fabric, its modulus and ductility increase substantially. It was established that the number of crossover points in the weave structures offered excellent association with the impact energy absorption and formability behavior, which are important for many applications including automobiles, wind energy, marine and aerospace. Mechanical characterization of honeycomb composites with different cell sizes, opening angles and wall lengths revealed that the specific compression energy is higher for regular honeycomb structures with smaller cell sizes and a higher number of layers, keeping constant thickness.
Topics
No keywords indexed for this article. Browse by subject →
References
55
[1]
Bannister "Development and application of advanced textile composites" Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. (2004)
[2]
Karaduman, N.S., Karaduman, Y., Ozdemir, H., and Ozdemir, G. (2017). Textile Reinforced Structural Composites for Advanced Applications. Textiles for Advanced Applications, Intech Open.
10.5772/intechopen.68245
[3]
Behera "Mechanical behavior of 3D woven composites" Mater. Des. (2015) 10.1016/j.matdes.2014.11.020
[4]
Compressive response of hybrid 3D woven textile composites (H3DWTCs): An experimentally validated computational model
Deepak K. Patel, Anthony M. Waas, Chian-Fong Yen
Journal of the Mechanics and Physics of Solids
2019
10.1016/j.jmps.2018.08.018
[5]
Dash "Weave design sspects of 3D textile preforms towards mechanical properties of their composites" Fibers Polym. (2019) 10.1007/s12221-019-8841-z
[6]
Patel "Direct numerical simulation of 3D woven textile composites subjected to tensile loading: An experimentally validated multiscale approach" Compos. Part B Eng. (2018) 10.1016/j.compositesb.2018.06.012
[7]
Mishra "Modelling and simulation of earthquake resistant 3D woven textile structural concrete composites" Compos. Part B Eng. (2015) 10.1016/j.compositesb.2015.07.008
[8]
Moshtaghian, Z., Hasani, H., Zarrebini, M., and Shirazi, M.P. (2020). Development and auxetic characterization of 3D composites produced with newly-designed multi-cell flat-knitted spacer fabrics. J. Ind. Text., 1528083720971696.
10.1177/1528083720971696
[9]
Bunzel "Structural sandwich composites out of wood foam core and textile reinforced concrete sheets for versatile and sustainable use in the building industry" Mater Today Proc. (2020) 10.1016/j.matpr.2020.01.382
[10]
Manjunath "Flexural stability analysis of composite panels reinforced with stiffener integral woven preforms" J. Text. Inst. (2019) 10.1080/00405000.2018.1480913
[11]
Torre "Impact testing and simulation of composite sandwich structures for civil transportation" Compos. Struct. (2000) 10.1016/s0263-8223(00)00101-x
[12]
Shin "An experimental study of low-velocity impact responses of sandwich panels for Korean low floor bus" Compos. Struct. (2008) 10.1016/j.compstruct.2007.08.002
[13]
Tripathi, L., Neje, G., and Behera, B.K. (2020). Geometrical modeling of 3D woven honeycomb fabric for manufacturing of lightweight sandwich composite material. J. Ind. Text., 152808372093147.
10.1177/1528083720931472
[14]
Li "Fabrication, properties and failure of 3D integrated woven spacer composites with thickened face sheets" Mater. Lett. (2015) 10.1016/j.matlet.2015.02.058
[15]
Li "Experimental study on the bending properties and failure mechanism of 3D integrated woven spacer composites at room and cryogenic temperature" Compos. Struct. (2014) 10.1016/j.compstruct.2013.12.026
[16]
Kamble "Influence of cellulosic and non-cellulosic particle fillers on mechanical, dynamic mechanical, and thermogravimetric properties of waste cotton fiber reinforced green composites" Compos. Part B Eng. (2021) 10.1016/j.compositesb.2020.108595
[17]
Mouritz "Review of applications for advanced three-dimensional fiber textile composites" Compos. Part A Appl. Sci. Manuf. (1999) 10.1016/s1359-835x(99)00034-2
[18]
Neje "Investigation of mechanical performance of 3D woven spacer sandwich composites with different cell geometries" Compos. Part B Eng. (2019) 10.1016/j.compositesb.2018.10.036
[19]
Pirouzfar "Effect of geometrical parameters on the flexural properties of sandwich structures with 3D-printed honeycomb core and E-glass/epoxy Face-sheets" Structures (2021) 10.1016/j.istruc.2021.06.033
[20]
Song "Compression, bending, energy absorption properties, and failure modes of composite Kagome honeycomb sandwich structure reinforced by PMI foams" Compos. Struct. (2021) 10.1016/j.compstruct.2021.114611
[21]
Manjunath "Influence of augmented tuning of core architecture in 3D woven sandwich structures on flexural and compression properties of their composites" Adv. Compos. Mater. (2020) 10.1080/09243046.2019.1680925
[22]
Fan "An experiment study on the failure mechanisms of woven textile sandwich panels under quasi-static loading" Compos. Part B Eng. (2010) 10.1016/j.compositesb.2010.07.004
[23]
Zhao "Experimental study on the compression properties and failure mechanism of 3D integrated woven spacer composites" Mater. Des. (2014) 10.1016/j.matdes.2013.10.083
[24]
Vuure "Mechanical properties of composite panels based on woven sandwich-fabric preforms" Compos. Part A Appl. Sci. Manuf. (2000) 10.1016/s1359-835x(00)00017-8
[25]
Karahan "Investigation into the tensile properties of stitched and unstitched woven Aramid/Vinyl Ester composites" Text. Res. J. (2010) 10.1177/0040517509346441
[26]
Ahmed "Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites" J. Mater. Process. Technol. (2008) 10.1016/j.jmatprotec.2008.06.038
[27]
Kamble, Z., Behera, B.K., Kimura, T., and Haruhiro, I. (2020). Development and characterization of thermoset nanocomposites reinforced with cotton fibers recovered from textile waste. J. Ind. Text., 1–27.
10.1177/1528083720913535
[28]
Lee "Performance of interlaminar flax-carbon hybrids under bending" Procedia Manuf. (2020) 10.1016/j.promfg.2020.02.134
[29]
Jawaid "Mechanical performance of oil palm empty fruit bunches/jute fibers reinforced epoxy hybrid composites" Mater. Sci. Eng. A (2010) 10.1016/j.msea.2010.09.005
[30]
Dau "In-plane and out-of-plane characterization of a 3D angle interlock textile composite" Compos. Part A Appl. Sci. Manuf. (2021) 10.1016/j.compositesa.2021.106581
[31]
Liu "Comparisons of influence of random defects on the impact compressive behavior of three different textile structural composites" Mater. Des. (2019) 10.1016/j.matdes.2019.108073
[32]
Ladani "Delamination fatigue resistant three-dimensional textile self-healing composites" Compos. Part A Appl. Sci. Manuf. (2019) 10.1016/j.compositesa.2019.105626
[33]
Wondmagegnehu "Fabricated and analyzed the mechanical properties of textile waste/glass fiber hybrid composite materiál" Mater. Today Proc. (2021) 10.1016/j.matpr.2020.12.984
[34]
Zhang "An experimental–numerical study on 3D angle-interlock woven composite under transverse impact at subzero temperatures" Compos. Struct. (2021) 10.1016/j.compstruct.2021.113936
[35]
Li "Experimental study of the indentation of sandwich panels with carbon fibre-reinforced polymer face sheets and polymeric foam core" Compos. Part B Eng. (2011) 10.1016/j.compositesb.2011.02.013
[36]
Conejos "Viscoelastic homogenization of 3D woven composites with damping validation in temperature and verification of scale separation" Compos. Struct. (2021) 10.1016/j.compstruct.2021.114375
[37]
Yan "Effect of fibre architecture on tensile pull-off behaviour of 3D woven composite T-joints" Compos. Struct. (2020) 10.1016/j.compstruct.2020.112194
[38]
Jiao "Effect of weaving structures on the geometry variations and mechanical properties of 3D LTL woven composites" Compos. Struct. (2020) 10.1016/j.compstruct.2020.112756
[39]
Alnatifat "Fully-reversed tension-compression fatigue of 2D and 3D woven polymer matrix composites at elevated temperature" Polym. Testing (2021) 10.1016/j.polymertesting.2021.107179
[40]
Nayak "Influence of stacking sequence on the mechanical properties of 3D E-glass/bamboo non-woven hybrid epoxy composites" Mater. Today Proc. (2021) 10.1016/j.matpr.2020.07.385
[41]
Li "Mechanical properties prediction of 3D angle-interlock woven composites by finite element modeling method" Mater. Today Commun. (2020) 10.1016/j.mtcomm.2019.100769
[42]
Guo "Influences of weave parameters on the mechanical behavior and fracture mechanisms of multidirectional angle-interlock 3D woven composites" Mater. Today Commun. (2020) 10.1016/j.mtcomm.2019.100886
[43]
Zeng "Bending performance and failure behavior of 3D printed continuous fiber reinforced composite corrugated sandwich structures with shape memory capability" Compos. Struct. (2021) 10.1016/j.compstruct.2021.113626
[44]
Zheng "Mechanical and energy absorption properties of the composite XX-type lattice sandwich structure" Eur. J. Mech.-A/Solids (2022) 10.1016/j.euromechsol.2021.104410
[45]
Chene "Mechanical properties analysis of the naval ship similar model with an integrated sandwich composite superstructure" Ocean Eng. (2021) 10.1016/j.oceaneng.2021.109101
[46]
Reddy "Effect of moisture absorption on the mechanical properties of jute/glass hybrid sandwich composites" Mater. Today Proc. (2021) 10.1016/j.matpr.2020.12.639
[47]
Khalili "Flexural properties of sandwich composite panels with glass laminate aluminum reinforced epoxy facesheets strengthened by SMA wires" Polym. Testing (2020) 10.1016/j.polymertesting.2020.106641
[48]
Li "Structural behaviour of composite sandwich panels with plain and fibre-reinforced foamed concrete cores and corrugated steel faces" Compos. Struct. (2012) 10.1016/j.compstruct.2011.12.017
[49]
Caglayan "The effect of CNT-reinforced polyurethane foam cores to flexural properties of sandwich composites" Compos. Part A Appl. Sci. Manuf. (2018) 10.1016/j.compositesa.2018.09.019
[50]
Bharath "Flexural response of 3D printed sandwich composite" Compos. Struct. (2021) 10.1016/j.compstruct.2021.113732
Showing 50 of 55 references
Metrics
28
Citations
55
References
Details
- Published
- Oct 14, 2021
- Vol/Issue
- 13(20)
- Pages
- 3535
- License
- View
Authors
Funding
Internal grant agency of Faculty of Engineering no. 2021:31140/1312/3108 “Experimental research of hybrid adhesive bonds with multilayer sandwich construction, Czech University of Life Sciences Prague”.
Award: 2021:31140/1312/3108
Cite This Article
Zunjarrao Kamble, Rajesh Kumar Mishra, Bijoya Kumar Behera, et al. (2021). Design, Development, and Characterization of Advanced Textile Structural Hollow Composites. Polymers, 13(20), 3535. https://doi.org/10.3390/polym13203535
Related
You May Also Like
Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier
Hirenkumar K. Makadia, Steven J. Siegel · 2011
3,980 citations
Chitosan: An Overview of Its Properties and Applications
Inmaculada Aranaz, Andrés R. Alcántara · 2021
1,433 citations
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Dipen Rajak, Durgesh Pagar · 2019
1,391 citations
Thermoresponsive Polymers for Biomedical Applications
Mark A. Ward, Theoni K. Georgiou · 2011
1,048 citations
Fundamental Concepts of Hydrogels: Synthesis, Properties, and Their Applications
Shahid Bashir, Maryam Hina · 2020
964 citations