journal article Open Access Dec 25, 2023

Surface Degradation of DGEBA Epoxy Resins Cured with Structurally Different Amine Hardeners: Effects of UV Radiation

Polymers Vol. 16 No. 1 pp. 67 · MDPI AG
View at Publisher Save 10.3390/polym16010067
Abstract
In this study, the effects of three diamine curing agents (aromatic, cycloaliphatic, aliphatic) on the photochemical behavior of bisphenol A diglycidyl ether networks were comparatively examined. In order to monitor structural changes and study the curing agents’ action mode, the cured epoxy resins were characterized before and after photoirradiation by means of Fourier-transform infrared spectroscopy, contact angle, differential scanning calorimetry, scanning electron microscopy, and energy-dispersive X-ray analysis, mass loss, and color modification measurements. Water absorption tests were also conducted. The cured epoxy resins are to be used in different multicomponent polymer materials for outdoor protection. The presence of the cycloaliphatic hardener led to reduced water absorption, and after UV irradiation, an increase in the glass transition temperature and lowest mass loss of the corresponding cured epoxy resin compared to the ones cured with aromatic and aliphatic hardener.
Topics

No keywords indexed for this article. Browse by subject →

References
61
[1]
Auvergne "Biobased Thermosetting Epoxy: Present and Future" Chem. Rev. (2014) 10.1021/cr3001274
[2]
Ng, F., Couture, G., Philippe, C., Boutevin, B., and Caillol, S. (2017). Bio-Based Aromatic Epoxy Monomers for Thermoset. Molecules, 22. 10.3390/molecules22010149
[3]
Thomas, R., Vijayan, P., and Thomas, S. (2011). Recent Developments in Polymer Recycling, Transworld Research Network.
[4]
Mustata "Assessing the Thermal and Fungal Behavior of Eco-Friendly Epoxy Thermosets Derived From Vegetable Oils for Wood Protective Coatings" Prog. Org. Coat. (2022) 10.1016/j.porgcoat.2021.106612
[5]
Irfan, M.H. (1998). Chemistry and Technology of Thermosetting Polymers in Construction Applications, Springer Science + Business Media, B.V. 10.1007/978-94-011-4954-9
[6]
Rosu "Bio-Based Coatings From Epoxy Resins Crosslinked with a Rosin Acid Derivative for Wood Thermal and Anti–fungal Protection" Prog. Org. Coat. (2021) 10.1016/j.porgcoat.2020.106008
[7]
Hayaty "Curing Behavior of Dicyandiamide/Epoxy Resin System Using Different Accelerators" Iran. Polym. J. (2013) 10.1007/s13726-013-0158-y
[8]
"Investigation of the Curing Kinetics of Alkyd–Melamine–Epoxy Resin System" Prog. Org. Coat. (2012) 10.1016/j.porgcoat.2011.03.016
[9]
Skeist, I. (2011). Handbook of Adhesives, Springer Inc.
[10]
Schwaiger "Mechanical Flexible Epoxy Resins with 100% Bio-Based Carbon Content Based on Epoxidized Vegetable Oils" J. Appl. Polym. Sci. (2022) 10.1002/app.53233
[11]
Miracle, D.B., and Donaldson, S.L. (2001). ASM Handbook Volume 21: Composites, ASM International. 10.31399/asm.hb.v21.9781627081955
[12]
Ashcroft, W., and Ellis, B. (1993). Chemistry and Technology of Epoxy Resins, Springer.
[13]
Li "Effects of the furan ring in epoxy resin on the thermomechanical properties of highly cross-linked epoxy networks: A molecular simulation study" RSC Adv. (2016) 10.1039/c5ra22955c
[14]
Ehlers "Theoretical Study on Mechanisms of the Epoxy−Amine Curing Reaction" Macromolecules (2007) 10.1021/ma070423m
[15]
Synthesis and application of epoxy resins: A review

Fan-Long Jin, Xiang Li, Soo-Jin Park

Journal of Industrial and Engineering Chemistry 2015 10.1016/j.jiec.2015.03.026
[16]
Towards Sustainable Recycling of Epoxy-Based Polymers: Approaches and Challenges of Epoxy Biodegradation

Leon Klose, Neele Meyer-Heydecke, Sasipa Wongwattanarat et al.

Polymers 10.3390/polym15122653
[17]
Gu "An Overview of Multifunctional Epoxy Nanocomposites" J. Mater. Chem. C (2016) 10.1039/c6tc01210h
[18]
Toldy "Intrinsically Flame Retardant Epoxy Resin-Fire Performance and Background–Part II" Polym. Degrad. Stab. (2008) 10.1016/j.polymdegradstab.2008.02.011
[19]
Zhao "Layer–by–Layer Grafting CNTs Onto Carbon Fibers Surface for Enhancing the Interfacial Properties of Epoxy Resin Composites" Compos. Sci. Technol. (2018) 10.1016/j.compscitech.2017.11.002
[20]
Varganici "Semi–Interpenetrating Networks Based on Epoxy Resin and Oligophosphonate: Comparative Effect of Three Hardeners on the Thermal and Fire Properties" Mater. Des. (2021) 10.1016/j.matdes.2021.110237
[21]
Varganici, C.D., Rosu, L., Rosu, D., Hamciuc, C., Rosca, I., and Vasiliu, A.L. (2022). Effect of Hardener Type on the Photochemical and Antifungal Performance of Epoxy and Oligophosphonate S–IPNs. Polymers, 14. 10.3390/polym14183784
[22]
Liu "A Comprehensive Review on Mechanical Properties of Pultruded FRP Composites Subjected to Long-Term Environmental Effects" Compos. B Eng. (2020) 10.1016/j.compositesb.2020.107958
[23]
Wu "Yellowing Mechanisms of Epoxy and Vinyl Ester Resins Under Thermal, UV and Natural Aging Conditions and Protection Methods" Polym. Test. (2022) 10.1016/j.polymertesting.2022.107708
[24]
Wan "Thermal conductivities and mechanical properties of epoxy resin as a function of the degree of cross-linking" Int. J. Heat Mass Transf. (2021) 10.1016/j.ijheatmasstransfer.2021.121821
[25]
Weisbrodt, M., Kowalczyk, A., and Kowalczyk, K. (2021). Structural Adhesives Tapes Based on a Solid Epoxy Resin and Multifunctional Acrylic Telomers. Polymers, 13. 10.3390/polym13203561
[26]
Hsu, W.-L., Liu, C.-C., Shiau, Y.-C., and Lin, W.-C. (2019). Discussion on the Reinforcement of Reinforced Concrete Slab Structures. Sustainability, 11. 10.3390/su11061756
[27]
Chand, N., and Fahim, M. (2021). Tribology of Natural Fiber Polymer Composites, Woodhead Publishing. [2nd ed.]. 10.1016/b978-0-12-818983-2.00001-3
[28]
Recent Trends and Developments in Conducting Polymer Nanocomposites for Multifunctional Applications

Shubham Sharma, P. Sudhakara, Abdoulhdi A. Borhana Omran et al.

Polymers 10.3390/polym13172898
[29]
Chan, J.X., Wong, J.F., Petrů, M., Hassan, A., Nirmal, U., Othman, N., and Ilyas, R.A. (2021). Effect of Nanofillers on Tribological Properties of Polymer Nanocomposites: A Review on Recent Development. Polymers, 13. 10.3390/polym13172867
[30]
Fu "Some Basic Aspects of Polymer Nanocomposites: A Critical Review" Nano Mater. Sci. (2019) 10.1016/j.nanoms.2019.02.006
[31]
Siwal, S.S., Zhang, Q., Devi, N., and Thakur, V.K. (2020). Carbon-Based Polymer Nanocomposite for High-Performance Energy Storage Applications. Polymers, 12. 10.3390/polym12030505
[32]
Khan "Comprehensive Review on Carbon Nanotubes Embedded in Different Metal and Polymer Matrix: Fabrications and Applications" Crit. Rev. Solid State Mater. Sci. (2022) 10.1080/10408436.2021.1935713
[33]
Pan "Highly Thermally Conductive 3D BN/MWCNTs/C Spatial Network Composites with Improved Electrically Insulating and Flame Retardancy Prepared by Biological Template Assisted Method" Compos. Part B Eng. (2021) 10.1016/j.compositesb.2021.109039
[34]
Ilyin "Rheology and Tribology of Nanocellulose-Based Biodegradable Greases: Wear and Friction Protection Mechanisms of Cellulose Microfibrils" Tribol. Int. (2023) 10.1016/j.triboint.2022.108080
[35]
Bee "Polymer Nanocomposites Based on Silylated-Montmorillonite: A Review" Prog. Polym. Sci. (2018) 10.1016/j.progpolymsci.2018.07.003
[36]
Sun "Recent Progress in Graphene/Polymer Nanocomposites" Adv. Mater. (2021) 10.1002/adma.202001105
[37]
Islam "Graphene and CNT-Based Smart Fiber-Reinforced Composites: A Review" Adv. Funct. Mater. (2022) 10.1002/adfm.202205723
[38]
Kostyuk "Rheology and Adhesive Properties of Filled PIB-Based Pressure-Sensitive Adhesives. I. Rheology and Shear Resistance" J. Adhes. Sci. Technol. (2015) 10.1080/01694243.2014.980616
[39]
Ilyin "Epoxy Reinforcement with Silicate Particles: Rheological and Adhesive Properties—Part I: Characterization of Composites with Natural and Organically Modified Montmorillonites" Int. J. Adhes. Adhes. (2015) 10.1016/j.ijadhadh.2015.05.008
[40]
Ignatenko "Heavy Crude Oil Asphatenes as a Nanofiller for Epoxy Resin" Polym. Eng. Sci. (2020) 10.1002/pen.25399
[41]
Sinha "Effect of Nano SiO2 on Properties of Natural Fiber Reinforced Epoxy Hybrid Composite: A Review" Mater. Today Proc. (2020) 10.1016/j.matpr.2020.02.657
[42]
Sharma, H., Kumar, A., Rana, S., and Guadagno, L. (2022). An Overview on Carbon Fiber-Reinforced Epoxy Composites: Effect of Graphene Oxide Incorporation on Composites Performance. Polymers, 14. 10.3390/polym14081548
[43]
Liu, H., Sun, Y., Yu, Y., Zhang, M., Li, L., and Ma, L. (2022). Effect of Nano-SiO2 Modification on Mechanical and Insulation Properties of Basalt Fiber Reinforced Composites. Polymers, 14. 10.3390/polym14163353
[44]
Sapiai, N., Jumahat, A., Jawaid, M., Midani, M., and Khan, A. (2020). Tensile and Flexural Properties of Silica Nanoparticles Modified Unidirectional Kenaf and Hybrid Glass/Kenaf Epoxy Composites. Polymers, 12. 10.3390/polym12112733
[45]
Reinprecht "Colour Changes in Beech Wood Modified With Essential Oils Due to Fungal and Ageing-Fungal Attacks with Coniophora Puteana" Drewno (2015) 10.12841/wood.1644-3985.114.03
[46]
Musto "Vibrational Spectroscopy Evidence for the Dual Nature of Water Sorbed into Epoxy Resins" Chem. Mater. (2000) 10.1021/cm9906809
[47]
Cascaval "Polyurethane Epoxy Maleate of Bisphenol A Semi-Interpenetrating Polymer Networks" J. Appl. Polym. Sci. (2002) 10.1002/app.2236
[48]
Poletto "Comparative Study of Wood Flour Photodegradation of Two Wood Species Submitted to Artificial Weathering" Maderas Cienc. Tecnol. (2017)
[49]
Rosu "Photochemical Aging of Eco-Friendly Wood Coatings Derived from Vegetable Oils. ACS Appl" Polym. Mater. (2021)
[50]
Gu, X., Stanley, D., Byrd, W.E., Dickens, B., Vaca-Trigo, I., Meeker, W.Q., Nguyen, T., Chin, J.W., and Martin, J.W. (2009). Service Life Prediction of Polymeric Materials–Global Perspectives, Springer Science and Business Media.

Showing 50 of 61 references

Metrics
22
Citations
61
References
Details
Published
Dec 25, 2023
Vol/Issue
16(1)
Pages
67
License
View
Cite This Article
Cristian-Dragos Varganici, Liliana Rosu, Dan Rosu, et al. (2023). Surface Degradation of DGEBA Epoxy Resins Cured with Structurally Different Amine Hardeners: Effects of UV Radiation. Polymers, 16(1), 67. https://doi.org/10.3390/polym16010067
Related

You May Also Like

Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier

Hirenkumar K. Makadia, Steven J. Siegel · 2011

3,980 citations

Chitosan: An Overview of Its Properties and Applications

Inmaculada Aranaz, Andrés R. Alcántara · 2021

1,433 citations

Thermoresponsive Polymers for Biomedical Applications

Mark A. Ward, Theoni K. Georgiou · 2011

1,048 citations