The Relationship Between Microstructures and Mechanical Properties in Friction Stir Welding of Similar/Dissimilar Magnesium Alloys

Ruiyi Fan; Aoji Du; Fuhan Liu; Houyi Zhou; Wenchuang Ma

doi:10.1007/s11665-026-13759-5

journal article Apr 02, 2026

The Relationship Between Microstructures and Mechanical Properties in Friction Stir Welding of Similar/Dissimilar Magnesium Alloys

Ruiyi Fan Aoji Du Fuhan Liu Houyi Zhou Wenchuang Ma

Journal of Materials Engineering and Performance · Springer Science and Business Media LLC

View at Publisher Save 10.1007/s11665-026-13759-5

Topics

No keywords indexed for this article. Browse by subject →

References

65

[1]

K. Sabari, A. Muniappan, B. Deepanraj et al., Enhancing Mechanical Performance of Friction Stir Welded AZ31 Magnesium alloy with Nano-TiC Reinforcements using Grey Relational Analysis, Int. J. Precis. Eng. Manuf., 2025, 26, p 27–41. 10.1007/s12541-024-01096-3

[2]

Z.R. Zhou, S.J. Chen, M. Hodgson et al., Influence of Rotation Speed on the Corrosion Behavior of Friction Stir Welded Joints in AZ31 Magnesium Alloy, J. Mater. Res. Technol., 2025, 34, p 1223–1234. 10.1016/j.jmrt.2024.12.109

[3]

J.L. Zhang, H.J. Zhang, X. Chen et al., Microstructural mechanisms and Mechanical Behavior of Friction-Stir-Welded Mg Alloy Laminate Joints, J. Mater. Process. Technol., 2025, 338, 118779. 10.1016/j.jmatprotec.2025.118779

[4]

I. Sabry, M. Naseri and A.H.I. Mourad, Elucidating the Effect of Rotational Speed on Submerged Friction-Stir Welding of AZ31C Magnesium Alloy, J. Mater. Res. Technol., 2025, 39, p 1080–1090. 10.1016/j.jmrt.2025.09.175

[5]

H. Azzeddine, S. Sadi, F. Yusof et al., Revealing Stir Zone Heterogeneities in Friction Stir-Welded and Annealed AZ31 alloy, J. Magnesium Alloys, 2025, 13, p 3986–4004. 10.1016/j.jma.2025.07.009

[6]

C.C. Du, Y.T. Wu, M. Xia et al., Effect of Welding Speed on the Microstructure, Hardness, and Fatigue Performance of Al-Zn-Mg-Cu FSW Joints, Mater Charact, 2025, 230, 115684. 10.1016/j.matchar.2025.115684

[7]

S.Y. Fan, Z.H. Li, B.B. Wang et al., Inhibiting Microstructure Segregation and Softening in a 700 MPa grade Al-Zn-Mg-Cu alloy by a Novel Underwater-Assisted Dual-Rotation Friction Stir Welding Method, J. Mater. Sci. Technol., 2026, 257, p 292–306. 10.1016/j.jmst.2025.08.052

[8]

B. Zhou, X.L. Shan, J.L. Xiao et al., Experimental Investigation and Process Parameter Optimization of Simultaneous Staggered Double-Sided Friction Stir Welding, Int. J. Adv. Manuf. Technol., 2025 https://doi.org/10.1007/s00170-025-16876-y 10.1007/s00170-025-16876-y

[9]

W.J. Dong, X.C. Meng, Y.M. Xie et al., Wire-Based Friction Stir Welding Enables Equal-Strength Joining of Aluminum Alloys Even With Assembling Gaps, J. Manuf. Process., 2025, 151, p 426–433. 10.1016/j.jmapro.2025.07.050

[10]

Z. Zhang, C.K. Liu, Z.L. Yu et al., The Fabrication of Brass Reinforced Aluminum Matrix Composites by FSW, J. Mater. Res. Technol., 2024, 31, p 3383–3392. 10.1016/j.jmrt.2024.07.062

[11]

W.T. Li, X.C. Wang, X.C. Liu et al., Elucidation of Microstructure, Mechanical Properties and Wear Behavior in Double-Sided Vortex Flow-Based Friction Stir Welds of Medium-Thick Titanium Alloy Plates, J. Mater. Process. Technol., 2025, 342, 118951. 10.1016/j.jmatprotec.2025.118951

[12]

K. Zhang, R.Z. Zhao, J.F. Lv et al., Thermomechanical behavior of Ti-6Al-4V alloy via Hybrid Manufacturing with Laser Metal Deposition and Friction stir Processing, Appl. Therm. Eng., 2025, 276, 126951. 10.1016/j.applthermaleng.2025.126951

[13]

X.W. Yang, M.X. Yao, Y. Su et al., Forming control and the Relationship between microstructure and Mechanical Property in TIG-assisted Friction Stir Welded Joint of Ti-6Al-3Nb-2Zr-1Mo titanium alloy, J. Mater. Res. Technol., 2024, 33, p 6196–6206. 10.1016/j.jmrt.2024.11.002

[14]

V.P. Singh, C.S. Wu and S.L. Li, Role of Interfacial Microstructure and Intermetallic Compounds on Mechanical and Electrochemical Corrosion Behaviour of AA5052-AZ31 Dissimilar FSW joints, Mater Charact, 2025, 229, 115637. 10.1016/j.matchar.2025.115637

[15]

V. Bhojak, J.K. Jain, M.K. Banerjee et al., Experimental Investigation on Cooling-Assisted Friction Stir Welding of Dissimilar AA5083 and AA6061 Alloys, J. Mater. Eng. Perform., 2025 https://doi.org/10.1007/s11665-025-12396-8 10.1007/s11665-025-12396-8

[16]

S. Liu, Y.J. Ren and X.B. Hu, Characterization of Microstructure and Mechanical Properties of Dissimilar FSW Joints of 7075/6061 Aluminum Alloys: The Effects of Welding Heat Input and Material Flow Behavior, Structures, 2025, 80, 110030. 10.1016/j.istruc.2025.110030

[17]

Zn interlayer and tool offset effects on IMC formation and strength of AA5083/AZ91Mg joints via friction stir vibration welding

Behrouz Bagheri Vanani, Amin Abdollahzadeh, Mahmoud Abbasi et al.

The International Journal of Advanced Manufacturin... 2025 10.1007/s00170-025-16624-2

[18]

B. Yelamasetti, I.S.P. Sushma, K.K. Radha et al., Investigation of Thermal Fields, Residual Stresses, and Tensile Strength of Dissimilar Weldments of AA5052-AA7075 Alloys on the Stress Corrosion Cracking: Comparative Analysis of Coolant Effects For Enhancing Weld Integrity, J. Mater. Res. Technol., 2025, 38, p 6315–6326. 10.1016/j.jmrt.2025.09.032

[19]

Z.H. Li, Y.F. Deng, J.C. Zeng et al., Effect of Continuous Dynamic-Recrystallisation on High-Property Multilayer Cu Foils Joint by Friction-stir-Welding, Mater. Sci. Technol., 2024, 40, p 921–930. 10.1177/02670836241230825

[20]

T. Sun, J.H. Wu, Z.H. Yang et al., Dynamic Recrystallization Mechanism, Grain Structure Evolution, and Mechanical Behavior in Friction Stir Welding of Galvanized Steel at Different Cooling Rates, Int. J. Adv. Manuf. Technol., 2024, 132, p 5521–5535. 10.1007/s00170-024-13573-0

[21]

T. Ding, H.G. Yan, J.H. Chen et al., Microstructure Evolution and Recrystallization Mechanisms of High Mg alloyed Al-Mg Alloy During Friction Stir Welding with Different Cooling Media, J. Mater. Eng. Perform., 2023, 32, p 3809–3820. 10.1007/s11665-022-07349-4

[22]

R. Bhattacharjee, P.C. Yadav, S.S. Kamble et al., A Novel Induction-Assisted And Pneumatic FSW Setup for Dissimilar high-Temperature Alloys: A Computational materials Science-Based Monte Carlo Potts Analysis, Mater. Today Commun., 2026, 50, 114527. 10.1016/j.mtcomm.2025.114527

[23]

F. Khodabakhshi, H.A. Derazkola and A.P. Gerlich, Monte Carlo Simulation of Grain Refinement during Friction Stir Processing, J. Mater. Sci., 2020, 55, p 13438–13456. 10.1007/s10853-020-04963-2

[24]

L.C. Zhang, Z.L. Yu, J.Y. Chen et al., Ultrafine Grain Control by Ultrasonic Vibrations in Directed Energy Deposition, Int. J. Mech. Sci., 2025, 307, 110925. 10.1016/j.ijmecsci.2025.110925

[25]

H.K. Kim, S.G. Kim, W. Dong et al., Phase-field Modeling for 3D Grain Growth Based on a Grain Boundary Energy Database, Model. Simul. Mater. Sci. Eng., 2014, 22, 034004. 10.1088/0965-0393/22/3/034004

[26]

M. Jamshidian, G. Zi and T. Rabczuk, Phase Field Modeling of Ideal Grain Growth in a Distorted Microstructure, Comput. Mater. Sci., 2014, 95, p 663–671. 10.1016/j.commatsci.2014.08.024

[27]

Z.B. Wang and Y.C. Xu, Effects of Temperature and Welding Heat Input on Abnormal Grain Growth in Friction-Stir welds of 2219 aluminum alloy, Mater. Des., 2025, 260, 115268. 10.1016/j.matdes.2025.115268

[28]

L.A. Reyes, C. Garza, M. Delgado et al., Cellular Automata Modeling for Rotary Friction Welding of Inconel 718, Mater. Manuf. Process., 2022, 37, p 877–885. 10.1080/10426914.2021.2001514

[29]

M. Akbari, P. Asadi, M.B. Givi et al., A Cellular Automaton Model for Microstructural Simulation of Friction Stir Welded AZ91 Magnesium Alloy, Model. Simul. Mater. Sci. Eng., 2016, 24, 035012. 10.1088/0965-0393/24/3/035012

[30]

N. Sayer, M. Fried and S. Münstermann, A Monte-Carlo Approach for Crack Initiation Modeling of cast Superalloys Informed by Crystal plasticity, Int. J. Fatigue, 2025, 190, 108616. 10.1016/j.ijfatigue.2024.108616

[31]

X.Y. Yang, X.Q. Shang, S.L. Liu et al., Creep Modeling for Nickel-Based Superalloy Aligning Grain Boundary Effect and Dislocation Movement, Comput. Mater. Sci., 2026, 261, 114302. 10.1016/j.commatsci.2025.114302

[32]

J.D. Pribe, P.E. Leser, S.R. Yeratapally et al., Multi-Model Monte Carlo Estimation for Crystal Plasticity Structure-Property Simulations of Additively Manufactured Metals, Comput. Mater. Sci., 2025, 247, 113481. 10.1016/j.commatsci.2024.113481

[33]

G. Han, K. Lee, J.Y. Yoon et al., Effect of Post-Weld Heat Treatment on Mechanical Properties of Local Weld-Affected Zones in Friction Stir Welded AZ31 Plates, Mater. Sci. Eng. A, 2021, 805, 140809. 10.1016/j.msea.2021.140809

[34]

W.K. Wang, W.C. Zhang, W.Z. Chen et al., Homogeneity Improvement of friction Stir Welded ZK61 Alloy Sheets in Microstructure and Mechanical Properties by Multi-pass Lowered-Temperature Rolling, Mater. Sci. Eng. A, 2017, 703, p 17–26. 10.1016/j.msea.2017.07.044

[35]

S.N. Kong, Q.F. Liu and Z. Zhang, Mechanism on Material Strengthening of Metastable Precipitate and Edge Dislocation in Al-Mg-Si alloy, physica status solidi (b), 2023, 260, 2200478. 10.1002/pssb.202200478

[36]

J.Y. Li, X.C. Qiu, S.N. Kong et al., Molecular Dynamics Simulation of Interaction Between Edge Dislocations and Stable β-Phase Precipitates in Aluminum Alloy, physica status solidi (b), 2023, 260, 2300246. 10.1002/pssb.202300246

[37]

Y.N. Wang, C.I. Chang and C.J. Lee, Texture and Weak Grain size Dependence in Friction Stir Processed Mg-Al-Zn Alloy, Scr. Mater., 2006, 55, p 637–640. 10.1016/j.scriptamat.2006.06.005

[38]

S.H.C. Park, Y.S. Sato and H. Kokawa, Microstructural Evolution and its Effect on Hall-Petch Relationship in Friction Stir Welding of Thixomolded Mg Alloy AZ91D, J. Mater. Sci., 2003, 38, p 4379–4383. 10.1023/a:1026351619636

[39]

M. Toursangsaraki and Y.X. Hu, Crystal Plasticity evaluation of Laser Peening Effects on Improving High-Cycle Fatigue Life of Al-Li Friction Stir Welded Joints, Mater. Des., 2022, 223, 111147. 10.1016/j.matdes.2022.111147

[40]

Microstructure-Based Modeling of Friction Stir Welded Joint of Dissimilar Metals Using Crystal Plasticity

Shank S. Kulkarni, Timothy Truster, Hrishikesh Das et al.

Journal of Manufacturing Science and Engineering 2021 10.1115/1.4051190

[41]

W.J. Ren, D.J. Liu, Q. Liu et al., Influence of Texture Distribution in Magnesium Welds on their Non-uniform Mechanical Behavior: a CPFEM Study, J. Mater. Sci. Technol., 2020, 46, p 168–176. 10.1016/j.jmst.2020.01.035

[42]

X. Zhang, P.P. Bauer, A. Lutz et al., Microplasticity and Macroplasticity Behavior of Additively Manufactured Al-Mg-Sc-Zr Alloys: In-Situ Experiment and Modeling, Int. J. Plast., 2023, 166, 103659. 10.1016/j.ijplas.2023.103659

[43]

X.X. Zhang and F.P.E. Dunne, 3D CP-XFEM Modelling of Short Crack Propagation Interacting with twist/tilt Nickel Grain Boundaries, J. Mech. Phys. Solids, 2022, 168, 105028. 10.1016/j.jmps.2022.105028

[44]

X.X. Zhang, A. Lutz, H. Andrä et al., An Additively Manufactured and Direct-Aged Alsi3.5Mg2.5 alloy with Superior Strength and Ductility: Micromechanical Mechanisms, Int. J. Plast., 2021, 146, 103083. 10.1016/j.ijplas.2021.103083

[45]

J.Y. Li, B.B. Wang, L.E. Lindgren et al., Microstructure-Based Simulation of Constitutive Behaviors in Friction Stir Additive Manufacturing, Int. J. Mech. Sci., 2025, 286, 109863. 10.1016/j.ijmecsci.2024.109863

[46]

Z. Zhang, Z. Tan, Y. Wang et al., The Relationship Between Microstructures and Mechanical Properties in Friction Stir Lap Welding of Titanium Alloy, Mater. Chem. Phys., 2023, 296, 127251. 10.1016/j.matchemphys.2022.127251

[47]

J.Y. Li, Z. Zhang, D. Ren et al., The Experimental and Numerical Studies on load bearing capacity in Lamellar Tearing of Friction Stir Lap Weld, Eng. Fract. Mech., 2022, 271, 108609. 10.1016/j.engfracmech.2022.108609

[48]

Z. Zhang, Z.J. Tan, J.Y. Li et al., Integrated Modeling of Process-Microstructure-Property Relations in Friction Stir Additive Manufacturing, Acta Metallurgica Sinica (English Letters), 2020, 33, p 75–87. 10.1007/s40195-019-00945-9

[49]

A. Simar, Y. Bréchet, B. de Meester et al., Sequential Modeling of Local Precipitation, Strength and Strain Hardening in Friction Stir Welds of an Aluminum Alloy 6005A-T6, Acta Mater., 2007, 55, p 6133–6143. 10.1016/j.actamat.2007.07.012

[50]

Z. Zhang, Y.H. Xiao, C.K. Liu et al., Experimental and Numerical Studies of Relationship between Microstructures and Mechanical Properties in Friction Stir Welding Under Water, J. Mater. Sci., 2024, 59, p 19716–19733. 10.1007/s10853-024-10357-5

Showing 50 of 65 references

Metrics

0

Citations

65

References

Details

Published: Apr 02, 2026
License: View

Authors

Cite This Article

Ruiyi Fan, Aoji Du, Fuhan Liu, et al. (2026). The Relationship Between Microstructures and Mechanical Properties in Friction Stir Welding of Similar/Dissimilar Magnesium Alloys. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-026-13759-5

The Relationship Between Microstructures and Mechanical Properties in Friction Stir Welding of Similar/Dissimilar Magnesium Alloys

You May Also Like